Message ID | 20220610202330.799510-2-colin.foster@in-advantage.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | add support for VSC7512 control over SPI | expand |
On Fri, Jun 10, 2022 at 10:23 PM Colin Foster <colin.foster@in-advantage.com> wrote: > > Several ocelot-related modules are designed for MMIO / regmaps. As such, > they often use a combination of devm_platform_get_and_ioremap_resource and > devm_regmap_init_mmio. > > Operating in an MFD might be different, in that it could be memory mapped, > or it could be SPI, I2C... In these cases a fallback to use IORESOURCE_REG > instead of IORESOURCE_MEM becomes necessary. > > When this happens, there's redundant logic that needs to be implemented in > every driver. In order to avoid this redundancy, utilize a single function > that, if the MFD scenario is enabled, will perform this fallback logic. v10 has the same issues I have pointed out in v9. Please, take your time and instead of bombing mailing lists with new versions try to look how other (most recent) drivers have been done. Also pay attention to the API design.
Hi Andy, On Sat, Jun 11, 2022 at 12:37:26PM +0200, Andy Shevchenko wrote: > On Fri, Jun 10, 2022 at 10:23 PM Colin Foster > <colin.foster@in-advantage.com> wrote: > > > > Several ocelot-related modules are designed for MMIO / regmaps. As such, > > they often use a combination of devm_platform_get_and_ioremap_resource and > > devm_regmap_init_mmio. > > > > Operating in an MFD might be different, in that it could be memory mapped, > > or it could be SPI, I2C... In these cases a fallback to use IORESOURCE_REG > > instead of IORESOURCE_MEM becomes necessary. > > > > When this happens, there's redundant logic that needs to be implemented in > > every driver. In order to avoid this redundancy, utilize a single function > > that, if the MFD scenario is enabled, will perform this fallback logic. > > v10 has the same issues I have pointed out in v9. > > Please, take your time and instead of bombing mailing lists with new > versions try to look how other (most recent) drivers have been done. Yes - I recognize that my decision to try to throw in a quick fix was the wrong one. My apologies. When you mention looking at more recent drivers - are you referencing the submission process, or something else? > > Also pay attention to the API design. I understand if I'm making a helper function, that helper function shouldn't change the API if it can be avoided. Hopefully the updates I suggested are the correct ones. Thanks again for the feedback. > > -- > With Best Regards, > Andy Shevchenko
diff --git a/MAINTAINERS b/MAINTAINERS index 033a01b07f8f..91b4151c5ad1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14352,6 +14352,11 @@ F: net/dsa/tag_ocelot.c F: net/dsa/tag_ocelot_8021q.c F: tools/testing/selftests/drivers/net/ocelot/* +OCELOT EXTERNAL SWITCH CONTROL +M: Colin Foster <colin.foster@in-advantage.com> +S: Supported +F: include/linux/mfd/ocelot.h + OCXL (Open Coherent Accelerator Processor Interface OpenCAPI) DRIVER M: Frederic Barrat <fbarrat@linux.ibm.com> M: Andrew Donnellan <ajd@linux.ibm.com> diff --git a/include/linux/mfd/ocelot.h b/include/linux/mfd/ocelot.h new file mode 100644 index 000000000000..40e775f1143f --- /dev/null +++ b/include/linux/mfd/ocelot.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* Copyright 2022 Innovative Advantage Inc. */ + +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +static inline void +ocelot_platform_init_regmap_from_resource(struct platform_device *pdev, + unsigned int index, + struct regmap **map, + struct resource **res, + const struct regmap_config *config); +{ + u32 __iomem *regs = + devm_platform_get_and_ioremap_resource(pdev, index, res); + + if (!IS_ERR(regs)) + *map = devm_regmap_init_mmio(&pdev->dev, regs, config); + else + *map = ERR_PTR(ENODEV); +}
Several ocelot-related modules are designed for MMIO / regmaps. As such, they often use a combination of devm_platform_get_and_ioremap_resource and devm_regmap_init_mmio. Operating in an MFD might be different, in that it could be memory mapped, or it could be SPI, I2C... In these cases a fallback to use IORESOURCE_REG instead of IORESOURCE_MEM becomes necessary. When this happens, there's redundant logic that needs to be implemented in every driver. In order to avoid this redundancy, utilize a single function that, if the MFD scenario is enabled, will perform this fallback logic. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- MAINTAINERS | 5 +++++ include/linux/mfd/ocelot.h | 22 ++++++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 include/linux/mfd/ocelot.h