| Message ID | 20220610202330.799510-7-colin.foster@in-advantage.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add support for VSC7512 control over SPI | expand |
On Fri, Jun 10, 2022 at 01:23:29PM -0700, Colin Foster wrote: > Add devicetree bindings for SPI-controlled Ocelot chips, specifically the > VSC7512. > > Signed-off-by: Colin Foster <colin.foster@in-advantage.com> > --- > .../devicetree/bindings/mfd/mscc,ocelot.yaml | 160 ++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 161 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml > new file mode 100644 > index 000000000000..e298ca8d616d > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml > @@ -0,0 +1,160 @@ > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Ocelot Externally-Controlled Ethernet Switch > + > +maintainers: > + - Colin Foster <colin.foster@in-advantage.com> > + > +description: | > + The Ocelot ethernet switch family contains chips that have an internal CPU > + (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have > + the option to be controlled externally, which is the purpose of this driver. > + > + The switch family is a multi-port networking switch that supports many > + interfaces. Additionally, the device can perform pin control, MDIO buses, and > + external GPIO expanders. > + > +properties: > + compatible: > + enum: > + - mscc,vsc7512-spi '-spi' is redundant as we know what bus this is on looking at the parent. > + > + reg: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 No size? That's odd given the child nodes are the same as memory mapped peripherals which expect a size. > + > + spi-max-frequency: > + maxItems: 1 > + > +patternProperties: > + "^pinctrl@[0-9a-f]+$": > + type: object > + $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml > + > + "^gpio@[0-9a-f]+$": > + type: object > + $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml > + properties: > + compatible: > + enum: > + - mscc,ocelot-sgpio > + > + "^mdio@[0-9a-f]+$": > + type: object > + $ref: /schemas/net/mscc,miim.yaml > + properties: > + compatible: > + enum: > + - mscc,ocelot-miim > + > +required: > + - compatible > + - reg > + - '#address-cells' > + - '#size-cells' > + - spi-max-frequency > + > +additionalProperties: false > + > +examples: > + - | > + ocelot_clock: ocelot-clock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + }; > + > + spi0 { spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ocelot-chip@0 { Node names should be generic. I don't think we have a formal definition, but 'switch' seems to be most common. > + compatible = "mscc,vsc7512-spi"; > + spi-max-frequency = <2500000>; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + mdio0: mdio@7107009c { Drop unused labels. > + compatible = "mscc,ocelot-miim"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7107009c>; > + > + sw_phy0: ethernet-phy@0 { > + reg = <0x0>; > + }; > + }; > + > + mdio1: mdio@710700c0 { > + compatible = "mscc,ocelot-miim"; > + pinctrl-names = "default"; > + pinctrl-0 = <&miim1_pins>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x710700c0>; > + > + sw_phy4: ethernet-phy@4 { > + reg = <0x4>; > + }; > + }; > + > + gpio: pinctrl@71070034 { > + compatible = "mscc,ocelot-pinctrl"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&gpio 0 0 22>; > + reg = <0x71070034>; > + > + sgpio_pins: sgpio-pins { > + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; > + function = "sg0"; > + }; > + > + miim1_pins: miim1-pins { > + pins = "GPIO_14", "GPIO_15"; > + function = "miim"; > + }; > + }; > + > + sgpio: gpio@710700f8 { > + compatible = "mscc,ocelot-sgpio"; > + #address-cells = <1>; > + #size-cells = <0>; > + bus-frequency = <12500000>; > + clocks = <&ocelot_clock>; > + microchip,sgpio-port-ranges = <0 15>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sgpio_pins>; > + reg = <0x710700f8>; > + > + sgpio_in0: gpio@0 { > + compatible = "microchip,sparx5-sgpio-bank"; > + reg = <0>; > + gpio-controller; > + #gpio-cells = <3>; > + ngpios = <64>; > + }; > + > + sgpio_out1: gpio@1 { > + compatible = "microchip,sparx5-sgpio-bank"; > + reg = <1>; > + gpio-controller; > + #gpio-cells = <3>; > + ngpios = <64>; > + }; > + }; > + }; > + }; > + > +... > + > diff --git a/MAINTAINERS b/MAINTAINERS > index 91b4151c5ad1..119fb4207ba3 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14355,6 +14355,7 @@ F: tools/testing/selftests/drivers/net/ocelot/* > OCELOT EXTERNAL SWITCH CONTROL > M: Colin Foster <colin.foster@in-advantage.com> > S: Supported > +F: Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml > F: include/linux/mfd/ocelot.h > > OCXL (Open Coherent Accelerator Processor Interface OpenCAPI) DRIVER > -- > 2.25.1 > >
Hi Rob, Thanks for the feedback! I'll include these changes in my next set. On Tue, Jun 14, 2022 at 02:43:45PM -0600, Rob Herring wrote: > On Fri, Jun 10, 2022 at 01:23:29PM -0700, Colin Foster wrote: ... > > +properties: > > + compatible: > > + enum: > > + - mscc,vsc7512-spi > > '-spi' is redundant as we know what bus this is on looking at the > parent. > Ahh... I see this now. A spi driver and an i2c driver (or otherwise) can share the same compatible string, and the device tree sorts that out for me. Thanks! > > + > > + reg: > > + maxItems: 1 > > + > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > No size? That's odd given the child nodes are the same as memory mapped > peripherals which expect a size. This one has gone back and forth a couple times. The base addresses were hard-coded in the driver and kept out of the device tree. But I couldn't explicitly differentiate between mfd children "mdio0" and "mdio1" below, so I recently added the address cells back in. This way mfd_cell->of_reg and mfd_cell->use_of_reg can be used. Unless suggested otherwise, I'll add size in here. As it is right now, that size will be essentially ignored though. The resources (base and size) are all defined in drivers/mfd/ocelot-core.c during the last patch of this series.
diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml new file mode 100644 index 000000000000..e298ca8d616d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ocelot Externally-Controlled Ethernet Switch + +maintainers: + - Colin Foster <colin.foster@in-advantage.com> + +description: | + The Ocelot ethernet switch family contains chips that have an internal CPU + (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have + the option to be controlled externally, which is the purpose of this driver. + + The switch family is a multi-port networking switch that supports many + interfaces. Additionally, the device can perform pin control, MDIO buses, and + external GPIO expanders. + +properties: + compatible: + enum: + - mscc,vsc7512-spi + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + spi-max-frequency: + maxItems: 1 + +patternProperties: + "^pinctrl@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml + + "^gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml + properties: + compatible: + enum: + - mscc,ocelot-sgpio + + "^mdio@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,miim.yaml + properties: + compatible: + enum: + - mscc,ocelot-miim + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - spi-max-frequency + +additionalProperties: false + +examples: + - | + ocelot_clock: ocelot-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + ocelot-chip@0 { + compatible = "mscc,vsc7512-spi"; + spi-max-frequency = <2500000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0: mdio@7107009c { + compatible = "mscc,ocelot-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7107009c>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + mdio1: mdio@710700c0 { + compatible = "mscc,ocelot-miim"; + pinctrl-names = "default"; + pinctrl-0 = <&miim1_pins>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x710700c0>; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + reg = <0x71070034>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + miim1_pins: miim1-pins { + pins = "GPIO_14", "GPIO_15"; + function = "miim"; + }; + }; + + sgpio: gpio@710700f8 { + compatible = "mscc,ocelot-sgpio"; + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <12500000>; + clocks = <&ocelot_clock>; + microchip,sgpio-port-ranges = <0 15>; + pinctrl-names = "default"; + pinctrl-0 = <&sgpio_pins>; + reg = <0x710700f8>; + + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + }; + }; + }; + +... + diff --git a/MAINTAINERS b/MAINTAINERS index 91b4151c5ad1..119fb4207ba3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14355,6 +14355,7 @@ F: tools/testing/selftests/drivers/net/ocelot/* OCELOT EXTERNAL SWITCH CONTROL M: Colin Foster <colin.foster@in-advantage.com> S: Supported +F: Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml F: include/linux/mfd/ocelot.h OCXL (Open Coherent Accelerator Processor Interface OpenCAPI) DRIVER
Add devicetree bindings for SPI-controlled Ocelot chips, specifically the VSC7512. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- .../devicetree/bindings/mfd/mscc,ocelot.yaml | 160 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 161 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml