diff mbox series

[1/2] arm: Disable jump-label on PREEMPT_RT.

Message ID 20220613182447.112191-2-bigeasy@linutronix.de (mailing list archive)
State New, archived
Headers show
Series arm: Disable two features which are not compatible with PREEMPT_RT | expand

Commit Message

Sebastian Andrzej Siewior June 13, 2022, 6:24 p.m. UTC 
From: Thomas Gleixner <tglx@linutronix.de>

jump-labels are used to efficiently switch between two possible code
paths. To achieve this, stop_machine() is used to keep the CPU in a
known state while the opcode is modified. The usage of stop_machine()
here leads to large latency spikes which can be observed on PREEMPT_RT.

Jump labels may change the target during runtime and are not restricted
to debug or "configuration/ setup" part of a PREEMPT_RT system where
high latencies could be defined as acceptable.

Disable jump-label support on a PREEMPT_RT system.

[bigeasy: Patch description.]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 arch/arm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7630ba9cb6ccc..2088d9322588e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -71,7 +71,7 @@  config ARM
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU && !PREEMPT_RT
 	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL