@@ -16,23 +16,25 @@ config DRM_SUN4I
if DRM_SUN4I
config DRM_SUN4I_HDMI
- tristate "Allwinner A10 HDMI Controller Support"
+ tristate "Allwinner A10/A10s/A20/A31 HDMI Controller Support"
+ depends on ARM || COMPILE_TEST
default DRM_SUN4I
help
- Choose this option if you have an Allwinner SoC with an HDMI
- controller.
+ Choose this option if you have an Allwinner A10/A10s/A20/A31
+ SoC with an HDMI controller.
config DRM_SUN4I_HDMI_CEC
- bool "Allwinner A10 HDMI CEC Support"
+ bool "Allwinner A10/A10s/A20/A31 HDMI CEC Support"
depends on DRM_SUN4I_HDMI
select CEC_CORE
select CEC_PIN
help
- Choose this option if you have an Allwinner SoC with an HDMI
- controller and want to use CEC.
+ Choose this option if you have an Allwinner A10/A10s/A20/A31
+ SoC with an HDMI controller and want to use CEC.
config DRM_SUN4I_BACKEND
tristate "Support for Allwinner A10 Display Engine Backend"
+ depends on ARM || COMPILE_TEST
default DRM_SUN4I
help
Choose this option if you have an Allwinner SoC with the
@@ -41,8 +43,8 @@ config DRM_SUN4I_BACKEND
selected the module will be called sun4i-backend.
config DRM_SUN6I_DSI
- tristate "Allwinner A31 MIPI-DSI Controller Support"
- default MACH_SUN8I
+ tristate "Allwinner A31/A64 MIPI-DSI Controller Support"
+ default DRM_SUN4I
select CRC_CCITT
select DRM_MIPI_DSI
select RESET_CONTROLLER
@@ -55,15 +57,17 @@ config DRM_SUN6I_DSI
config DRM_SUN8I_DW_HDMI
tristate "Support for Allwinner version of DesignWare HDMI"
depends on DRM_SUN4I
+ default DRM_SUN4I
select DRM_DW_HDMI
help
Choose this option if you have an Allwinner SoC with the
- DesignWare HDMI controller with custom HDMI PHY. If M is
+ DesignWare HDMI controller. SoCs that support HDMI and
+ have a Display Engine 2.0 contain this controller. If M is
selected the module will be called sun8i_dw_hdmi.
config DRM_SUN8I_MIXER
tristate "Support for Allwinner Display Engine 2.0 Mixer"
- default MACH_SUN8I
+ default DRM_SUN4I
help
Choose this option if you have an Allwinner SoC with the
Allwinner Display Engine 2.0, which has a mixer to do some
@@ -75,6 +79,6 @@ config DRM_SUN8I_TCON_TOP
default DRM_SUN4I if DRM_SUN8I_MIXER!=n
help
TCON TOP is responsible for configuring display pipeline for
- HTMI, TVE and LCD.
+ HDMI, TVE and LCD.
endif
Allwinner display drivers are split roughly into two generations. The first generation was found on early 32-bit ARM SoCs and contains DE1.0 and a custom HDMI controller. Clarify that these options only apply to a specific list of SoCs, and limit selecting them to 32-bit ARM, to avoid confusion. The second generation, found in A83T and newer SoCs (both 32-bit and 64-bit), contains a DE2.0 and a DesignWare HDMI controller. Since this is the most widely-used generation, enable it by default. The previous default condition (MACH_SUN8I) was limited to 32-bit SoCs. Also enable the DSI controller by default, which is found on 64-bit SoCs as well. Signed-off-by: Samuel Holland <samuel@sholland.org> --- drivers/gpu/drm/sun4i/Kconfig | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-)