| Message ID | 20220702213724.3949-4-semen.protsenko@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iommu/exynos: Add basic support for SysMMU v7 | expand |
On 02/07/2022 23:37, Sam Protsenko wrote: > SysMMU v7 might have different register layouts (VM capable or non-VM > capable). Check which layout is implemented in current SysMMU module and > prepare the corresponding register table for futher usage. This way is > faster and more elegant than checking corresponding condition (if it's > VM or non-VM SysMMU) each time before accessing v7 registers. For now > the register table contains only most basic registers needed to add the > SysMMU v7 support. > > This patch is based on downstream work of next authors: > - Janghyuck Kim <janghyuck.kim@samsung.com> > - Daniel Mentz <danielmentz@google.com> > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > drivers/iommu/exynos-iommu.c | 46 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > > diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c > index df6ddbebbe2b..47017e8945c5 100644 > --- a/drivers/iommu/exynos-iommu.c > +++ b/drivers/iommu/exynos-iommu.c > @@ -180,6 +180,47 @@ static u32 lv2ent_offset(sysmmu_iova_t iova) > > #define has_sysmmu(dev) (dev_iommu_priv_get(dev) != NULL) > > +#define MMU_REG(data, idx) \ > + ((data)->sfrbase + (data)->regs[idx].off) I would expect to see users of this - convert all existing regs. > +#define MMU_VM_REG(data, idx, vmid) \ > + (MMU_REG(data, idx) + (vmid) * (data)->regs[idx].mult) > + > +enum { > + REG_SET_NON_VM, > + REG_SET_VM, > + MAX_REG_SET > +}; > + > +enum { > + IDX_CTRL_VM, > + IDX_CFG_VM, > + IDX_FLPT_BASE, Isn't this called REG_MMU_FLUSH? If yes, it's a bit confusing to see different name used. > + IDX_ALL_INV, Isn't this called REG_MMU_FLUSH_ENTRY? > + MAX_REG_IDX > +}; > + > +struct sysmmu_vm_reg { > + unsigned int off; /* register offset */ > + unsigned int mult; /* VM index offset multiplier */ > +}; > + > +static const struct sysmmu_vm_reg sysmmu_regs[MAX_REG_SET][MAX_REG_IDX] = { > + /* Default register set (non-VM) */ > + { > + /* > + * SysMMUs without VM support do not have CTRL_VM and CFG_VM > + * registers. Setting the offsets to 1 will trigger an unaligned > + * access exception. So why are you setting offset 1? To trigger unaligned access? > + */ > + {0x1}, {0x1}, {0x000c}, {0x0010}, > + }, > + /* VM capable register set */ > + { > + {0x8000, 0x1000}, {0x8004, 0x1000}, {0x800c, 0x1000}, > + {0x8010, 0x1000}, > + }, You add here quite a bit of dead code and some hard-coded numbers. > +}; > + > static struct device *dma_dev; > static struct kmem_cache *lv2table_kmem_cache; > static sysmmu_pte_t *zero_lv2_table; > @@ -284,6 +325,7 @@ struct sysmmu_drvdata { > > /* v7 fields */ > bool has_vcr; /* virtual machine control register */ > + const struct sysmmu_vm_reg *regs; /* register set */ > }; > > static struct exynos_iommu_domain *to_exynos_domain(struct iommu_domain *dom) > @@ -407,6 +449,10 @@ static void sysmmu_get_hw_info(struct sysmmu_drvdata *data) > __sysmmu_get_version(data); > if (MMU_MAJ_VER(data->version) >= 7 && __sysmmu_has_capa1(data)) > __sysmmu_get_vcr(data); > + if (data->has_vcr) > + data->regs = sysmmu_regs[REG_SET_VM]; > + else > + data->regs = sysmmu_regs[REG_SET_NON_VM]; This is set and not read. > > __sysmmu_disable_clocks(data); > } Best regards, Krzysztof
On Sun, 3 Jul 2022 at 22:29, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 02/07/2022 23:37, Sam Protsenko wrote: > > SysMMU v7 might have different register layouts (VM capable or non-VM > > capable). Check which layout is implemented in current SysMMU module and > > prepare the corresponding register table for futher usage. This way is > > faster and more elegant than checking corresponding condition (if it's > > VM or non-VM SysMMU) each time before accessing v7 registers. For now > > the register table contains only most basic registers needed to add the > > SysMMU v7 support. > > > > This patch is based on downstream work of next authors: > > - Janghyuck Kim <janghyuck.kim@samsung.com> > > - Daniel Mentz <danielmentz@google.com> > > > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > > --- > > drivers/iommu/exynos-iommu.c | 46 ++++++++++++++++++++++++++++++++++++ > > 1 file changed, 46 insertions(+) > > > > diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c > > index df6ddbebbe2b..47017e8945c5 100644 > > --- a/drivers/iommu/exynos-iommu.c > > +++ b/drivers/iommu/exynos-iommu.c > > @@ -180,6 +180,47 @@ static u32 lv2ent_offset(sysmmu_iova_t iova) > > > > #define has_sysmmu(dev) (dev_iommu_priv_get(dev) != NULL) > > > > +#define MMU_REG(data, idx) \ > > + ((data)->sfrbase + (data)->regs[idx].off) > > I would expect to see users of this - convert all existing regs. > I was thinking about doing that as a consequent patch (adding SysMMU v1/v5 register sets). But ok, will add in v2. And will probably split it per 2 patches: 1. Rework existing driver to use register sets (lookup table). To keep it as "no functional change" patch. 2. Add SysMMU v7 support. Also, I will probably replace MMU_REG() with more standard approach, i.e. will add sysmmu_read() / sysmmu_write() functions instead. It should make the code tidier. > > +#define MMU_VM_REG(data, idx, vmid) \ > > + (MMU_REG(data, idx) + (vmid) * (data)->regs[idx].mult) > > + > > +enum { > > + REG_SET_NON_VM, > > + REG_SET_VM, > > + MAX_REG_SET > > +}; > > + > > +enum { > > + IDX_CTRL_VM, > > + IDX_CFG_VM, > > + IDX_FLPT_BASE, > > Isn't this called REG_MMU_FLUSH? If yes, it's a bit confusing to see > different name used. > I used v7 registers naming, as I only added support for v7 register set in this patch series. As I said above, I'll add SysMMU v1/v5 register sets in v2, and rename those indexes to have old register names. Despite the differences between register names in SysMMU v1/v5 and v7, their purpose is the same. > > + IDX_ALL_INV, > > Isn't this called REG_MMU_FLUSH_ENTRY? > > > + MAX_REG_IDX > > +}; > > + > > +struct sysmmu_vm_reg { > > + unsigned int off; /* register offset */ > > + unsigned int mult; /* VM index offset multiplier */ > > +}; > > + > > +static const struct sysmmu_vm_reg sysmmu_regs[MAX_REG_SET][MAX_REG_IDX] = { > > + /* Default register set (non-VM) */ > > + { > > + /* > > + * SysMMUs without VM support do not have CTRL_VM and CFG_VM > > + * registers. Setting the offsets to 1 will trigger an unaligned > > + * access exception. > > So why are you setting offset 1? To trigger unaligned access? > Yes, as comment suggests, 0x1 offset is set intentionally to cause the exception. That might be useful for debugging (if driver is trying to access some non-existing register on some particular SysMMU version). I'll improve the comment in v2. > > + */ > > + {0x1}, {0x1}, {0x000c}, {0x0010}, > > + }, > > + /* VM capable register set */ > > + { > > + {0x8000, 0x1000}, {0x8004, 0x1000}, {0x800c, 0x1000}, > > + {0x8010, 0x1000}, > > + }, > You add here quite a bit of dead code and some hard-coded numbers. > Ok, will remove those multiplier bits for now. It can be added later, when implementing domains support (to use VM registers other than n=0 instance). > > +}; > > + > > static struct device *dma_dev; > > static struct kmem_cache *lv2table_kmem_cache; > > static sysmmu_pte_t *zero_lv2_table; > > @@ -284,6 +325,7 @@ struct sysmmu_drvdata { > > > > /* v7 fields */ > > bool has_vcr; /* virtual machine control register */ > > + const struct sysmmu_vm_reg *regs; /* register set */ > > }; > > > > static struct exynos_iommu_domain *to_exynos_domain(struct iommu_domain *dom) > > @@ -407,6 +449,10 @@ static void sysmmu_get_hw_info(struct sysmmu_drvdata *data) > > __sysmmu_get_version(data); > > if (MMU_MAJ_VER(data->version) >= 7 && __sysmmu_has_capa1(data)) > > __sysmmu_get_vcr(data); > > + if (data->has_vcr) > > + data->regs = sysmmu_regs[REG_SET_VM]; > > + else > > + data->regs = sysmmu_regs[REG_SET_NON_VM]; > > This is set and not read. > It's used in patch 4/4. But as discussed above, I will convert existing code (SysMMU v1/v3/v5) to benefit from register set as well. Will send in v2. Thanks for the review! > > > > __sysmmu_disable_clocks(data); > > } > > > Best regards, > Krzysztof
diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c index df6ddbebbe2b..47017e8945c5 100644 --- a/drivers/iommu/exynos-iommu.c +++ b/drivers/iommu/exynos-iommu.c @@ -180,6 +180,47 @@ static u32 lv2ent_offset(sysmmu_iova_t iova) #define has_sysmmu(dev) (dev_iommu_priv_get(dev) != NULL) +#define MMU_REG(data, idx) \ + ((data)->sfrbase + (data)->regs[idx].off) +#define MMU_VM_REG(data, idx, vmid) \ + (MMU_REG(data, idx) + (vmid) * (data)->regs[idx].mult) + +enum { + REG_SET_NON_VM, + REG_SET_VM, + MAX_REG_SET +}; + +enum { + IDX_CTRL_VM, + IDX_CFG_VM, + IDX_FLPT_BASE, + IDX_ALL_INV, + MAX_REG_IDX +}; + +struct sysmmu_vm_reg { + unsigned int off; /* register offset */ + unsigned int mult; /* VM index offset multiplier */ +}; + +static const struct sysmmu_vm_reg sysmmu_regs[MAX_REG_SET][MAX_REG_IDX] = { + /* Default register set (non-VM) */ + { + /* + * SysMMUs without VM support do not have CTRL_VM and CFG_VM + * registers. Setting the offsets to 1 will trigger an unaligned + * access exception. + */ + {0x1}, {0x1}, {0x000c}, {0x0010}, + }, + /* VM capable register set */ + { + {0x8000, 0x1000}, {0x8004, 0x1000}, {0x800c, 0x1000}, + {0x8010, 0x1000}, + }, +}; + static struct device *dma_dev; static struct kmem_cache *lv2table_kmem_cache; static sysmmu_pte_t *zero_lv2_table; @@ -284,6 +325,7 @@ struct sysmmu_drvdata { /* v7 fields */ bool has_vcr; /* virtual machine control register */ + const struct sysmmu_vm_reg *regs; /* register set */ }; static struct exynos_iommu_domain *to_exynos_domain(struct iommu_domain *dom) @@ -407,6 +449,10 @@ static void sysmmu_get_hw_info(struct sysmmu_drvdata *data) __sysmmu_get_version(data); if (MMU_MAJ_VER(data->version) >= 7 && __sysmmu_has_capa1(data)) __sysmmu_get_vcr(data); + if (data->has_vcr) + data->regs = sysmmu_regs[REG_SET_VM]; + else + data->regs = sysmmu_regs[REG_SET_NON_VM]; __sysmmu_disable_clocks(data); }
SysMMU v7 might have different register layouts (VM capable or non-VM capable). Check which layout is implemented in current SysMMU module and prepare the corresponding register table for futher usage. This way is faster and more elegant than checking corresponding condition (if it's VM or non-VM SysMMU) each time before accessing v7 registers. For now the register table contains only most basic registers needed to add the SysMMU v7 support. This patch is based on downstream work of next authors: - Janghyuck Kim <janghyuck.kim@samsung.com> - Daniel Mentz <danielmentz@google.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- drivers/iommu/exynos-iommu.c | 46 ++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)