| Message ID | 20220722130554.236925-2-fabrice.gasnier@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | usb: misc: adopt onboard hub support on stm32mp1 boards | expand |
On Fri, 22 Jul 2022 15:05:51 +0200, Fabrice Gasnier wrote: > Allow properties and usb-device child nodes as defined in usb-hcd.yaml, by > using unevaluatedProperties: false. By the way, remove the "companion" > property as it's redundant with usb-hcd.yaml. > As example, this allows an onboard hub, to be described in generic-ehci > controller node: > usb { > compatible = "generic-ehci"; > #address-cells = <1>; > #size-cells = <0>; > /* onboard HUB */ > hub@1 { > compatible = "usb424,2514"; > reg = <1>; > vdd-supply = <&v3v3>; > }; > }; > > Without this, dtbs_check complains on '#address-cells', '#size-cells', > 'hub@1' do not match any of the regexes: 'pinctrl-[0-9]+' > From schema: ..../generic-ehci.yaml > > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> > --- > Documentation/devicetree/bindings/usb/generic-ehci.yaml | 7 +------ > 1 file changed, 1 insertion(+), 6 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 1e84e1b7ab271..e50c1cfaa1972 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -130,11 +130,6 @@ properties: Set this flag to indicate that the hardware sometimes turns on the OC bit when an over-current isn't actually present. - companion: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle of a companion. - phys: minItems: 1 maxItems: 3 @@ -155,7 +150,7 @@ required: - reg - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - |
Allow properties and usb-device child nodes as defined in usb-hcd.yaml, by using unevaluatedProperties: false. By the way, remove the "companion" property as it's redundant with usb-hcd.yaml. As example, this allows an onboard hub, to be described in generic-ehci controller node: usb { compatible = "generic-ehci"; #address-cells = <1>; #size-cells = <0>; /* onboard HUB */ hub@1 { compatible = "usb424,2514"; reg = <1>; vdd-supply = <&v3v3>; }; }; Without this, dtbs_check complains on '#address-cells', '#size-cells', 'hub@1' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: ..../generic-ehci.yaml Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> --- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)