diff mbox series

[1/2] spi: dt-bindings: amlogic, meson-gx-spicc: Add pinctrl names for SPI signal states

Message ID 20220809172017.215412-2-aouledameur@baylibre.com (mailing list archive)
State New, archived
Headers show
Series spi: amlogic: meson-spicc: Use pinctrl to drive CLK line when idle | expand

Commit Message

Amjad Ouled-Ameur Aug. 9, 2022, 5:20 p.m. UTC
SPI pins of the SPICC Controller in Meson-GX needs to be controlled by
pin biais when idle. Therefore define three pinctrl names:
- default: SPI pins are controlled by spi function.
- idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled
by spi function.
- idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled
by spi function.

Reported-by: Da Xue <da@libre.computer>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
---
 .../bindings/spi/amlogic,meson-gx-spicc.yaml      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Neil Armstrong Sept. 27, 2022, 8:29 a.m. UTC | #1
Hi,

On 09/08/2022 19:20, Amjad Ouled-Ameur wrote:
> SPI pins of the SPICC Controller in Meson-GX needs to be controlled by
> pin biais when idle. Therefore define three pinctrl names:
> - default: SPI pins are controlled by spi function.
> - idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled
> by spi function.
> - idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled
> by spi function.
> 
> Reported-by: Da Xue <da@libre.computer>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>

Don't forget to CC devicetree@vger.kernel.org otherwise it won't be reviewed.

> ---
>   .../bindings/spi/amlogic,meson-gx-spicc.yaml      | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> index 50de0da42c13..10707a8216f5 100644
> --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
> @@ -43,6 +43,14 @@ properties:
>       minItems: 1
>       maxItems: 2
>   
> +  pinctrl-0:
> +    minItems: 1
> +
> +  pinctrl-1:
> +    maxItems: 1
> +
> +  pinctrl-names: true
> +
>   if:
>     properties:
>       compatible:
> @@ -69,6 +77,13 @@ else:
>         items:
>           - const: core
>   
> +    pinctrl-names:
> +      minItems: 1
> +      items:
> +        - const: default
> +        - const: idle-high
> +        - const: idle-low
> +
>   required:
>     - compatible
>     - reg
Amjad Ouled-Ameur Sept. 27, 2022, 9:35 a.m. UTC | #2
Hi Neil

On 9/27/22 10:29, Neil Armstrong wrote:
> Hi,
>
> On 09/08/2022 19:20, Amjad Ouled-Ameur wrote:
>> SPI pins of the SPICC Controller in Meson-GX needs to be controlled by
>> pin biais when idle. Therefore define three pinctrl names:
>> - default: SPI pins are controlled by spi function.
>> - idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled
>> by spi function.
>> - idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled
>> by spi function.
>>
>> Reported-by: Da Xue <da@libre.computer>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
>
> Don't forget to CC devicetree@vger.kernel.org otherwise it won't be 
> reviewed.

Sure, will do in V2.

Regards,

Amjad

>
>
>> ---
>>   .../bindings/spi/amlogic,meson-gx-spicc.yaml      | 15 +++++++++++++++
>>   1 file changed, 15 insertions(+)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml 
>> b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
>> index 50de0da42c13..10707a8216f5 100644
>> --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
>> +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
>> @@ -43,6 +43,14 @@ properties:
>>       minItems: 1
>>       maxItems: 2
>>   +  pinctrl-0:
>> +    minItems: 1
>> +
>> +  pinctrl-1:
>> +    maxItems: 1
>> +
>> +  pinctrl-names: true
>> +
>>   if:
>>     properties:
>>       compatible:
>> @@ -69,6 +77,13 @@ else:
>>         items:
>>           - const: core
>>   +    pinctrl-names:
>> +      minItems: 1
>> +      items:
>> +        - const: default
>> +        - const: idle-high
>> +        - const: idle-low
>> +
>>   required:
>>     - compatible
>>     - reg
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 50de0da42c13..10707a8216f5 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -43,6 +43,14 @@  properties:
     minItems: 1
     maxItems: 2
 
+  pinctrl-0:
+    minItems: 1
+
+  pinctrl-1:
+    maxItems: 1
+
+  pinctrl-names: true
+
 if:
   properties:
     compatible:
@@ -69,6 +77,13 @@  else:
       items:
         - const: core
 
+    pinctrl-names:
+      minItems: 1
+      items:
+        - const: default
+        - const: idle-high
+        - const: idle-low
+
 required:
   - compatible
   - reg