| Message ID | 20220812080050.59850-1-samuel@sholland.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | clk: sunxi-ng: d1: Limit PLL rates to stable ranges | expand |
Dne petek, 12. avgust 2022 ob 10:00:49 CEST je Samuel Holland napisal(a): > Set the min/max rates for audio and video PLLs to keep them from going > outside their documented stable ranges. Use the most restrictive of the > "stable" and "actual" frequencies listed in the manual. > > Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej
Dne nedelja, 14. avgust 2022 ob 09:47:42 CEST je Jernej Škrabec napisal(a): > Dne petek, 12. avgust 2022 ob 10:00:49 CEST je Samuel Holland napisal(a): > > Set the min/max rates for audio and video PLLs to keep them from going > > outside their documented stable ranges. Use the most restrictive of the > > "stable" and "actual" frequencies listed in the manual. > > > > Signed-off-by: Samuel Holland <samuel@sholland.org> > > Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Applied, thanks! Best regards, Jernej
diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c index 51058ba4db4d..8ef3cdeb7962 100644 --- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c @@ -104,6 +104,8 @@ static struct ccu_nm pll_video0_4x_clk = { .lock = BIT(28), .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .min_rate = 252000000U, + .max_rate = 2400000000U, .common = { .reg = 0x040, .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-video0-4x", osc24M, @@ -126,6 +128,8 @@ static struct ccu_nm pll_video1_4x_clk = { .lock = BIT(28), .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .min_rate = 252000000U, + .max_rate = 2400000000U, .common = { .reg = 0x048, .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-video1-4x", osc24M, @@ -175,6 +179,8 @@ static struct ccu_nm pll_audio0_4x_clk = { .m = _SUNXI_CCU_DIV(16, 6), .sdm = _SUNXI_CCU_SDM(pll_audio0_sdm_table, BIT(24), 0x178, BIT(31)), + .min_rate = 180000000U, + .max_rate = 3000000000U, .common = { .reg = 0x078, .features = CCU_FEATURE_SIGMA_DELTA_MOD, @@ -202,6 +208,8 @@ static struct ccu_nm pll_audio1_clk = { .lock = BIT(28), .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), + .min_rate = 180000000U, + .max_rate = 3000000000U, .common = { .reg = 0x080, .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-audio1", osc24M,
Set the min/max rates for audio and video PLLs to keep them from going outside their documented stable ranges. Use the most restrictive of the "stable" and "actual" frequencies listed in the manual. Signed-off-by: Samuel Holland <samuel@sholland.org> --- drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 8 ++++++++ 1 file changed, 8 insertions(+)