@@ -18,24 +18,6 @@
#include <soc/bcm2835/raspberrypi-firmware.h>
-enum rpi_firmware_clk_id {
- RPI_FIRMWARE_EMMC_CLK_ID = 1,
- RPI_FIRMWARE_UART_CLK_ID,
- RPI_FIRMWARE_ARM_CLK_ID,
- RPI_FIRMWARE_CORE_CLK_ID,
- RPI_FIRMWARE_V3D_CLK_ID,
- RPI_FIRMWARE_H264_CLK_ID,
- RPI_FIRMWARE_ISP_CLK_ID,
- RPI_FIRMWARE_SDRAM_CLK_ID,
- RPI_FIRMWARE_PIXEL_CLK_ID,
- RPI_FIRMWARE_PWM_CLK_ID,
- RPI_FIRMWARE_HEVC_CLK_ID,
- RPI_FIRMWARE_EMMC2_CLK_ID,
- RPI_FIRMWARE_M2MC_CLK_ID,
- RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
- RPI_FIRMWARE_NUM_CLK_ID,
-};
-
static char *rpi_firmware_clk_names[] = {
[RPI_FIRMWARE_EMMC_CLK_ID] = "emmc",
[RPI_FIRMWARE_UART_CLK_ID] = "uart",
@@ -136,6 +136,24 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001,
};
+enum rpi_firmware_clk_id {
+ RPI_FIRMWARE_EMMC_CLK_ID = 1,
+ RPI_FIRMWARE_UART_CLK_ID,
+ RPI_FIRMWARE_ARM_CLK_ID,
+ RPI_FIRMWARE_CORE_CLK_ID,
+ RPI_FIRMWARE_V3D_CLK_ID,
+ RPI_FIRMWARE_H264_CLK_ID,
+ RPI_FIRMWARE_ISP_CLK_ID,
+ RPI_FIRMWARE_SDRAM_CLK_ID,
+ RPI_FIRMWARE_PIXEL_CLK_ID,
+ RPI_FIRMWARE_PWM_CLK_ID,
+ RPI_FIRMWARE_HEVC_CLK_ID,
+ RPI_FIRMWARE_EMMC2_CLK_ID,
+ RPI_FIRMWARE_M2MC_CLK_ID,
+ RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+ RPI_FIRMWARE_NUM_CLK_ID,
+};
+
#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE)
int rpi_firmware_property(struct rpi_firmware *fw,
u32 tag, void *data, size_t len);
We'll need the clock IDs in more drivers than just the clock driver from now on, so let's move them in the firmware header. Signed-off-by: Maxime Ripard <maxime@cerno.tech> --- drivers/clk/bcm/clk-raspberrypi.c | 18 ------------------ include/soc/bcm2835/raspberrypi-firmware.h | 18 ++++++++++++++++++ 2 files changed, 18 insertions(+), 18 deletions(-)