| Message ID | 20220822103219.3985075-1-pgwipeout@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | phy: rockchip-inno-usb2: Return zero after otg sync | expand |
On 8/22/22 5:32 AM, Peter Geis wrote: > The otg sync state patch reuses the ret variable, but fails to set it to > zero after use. This leads to a situation when the otg port is in > peripheral mode where the otg phy aborts halfway through setup. Fix this > by setting ret to zero after use. > > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") > > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net> > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net> > Tested-by: Markus Reichl <m.reichl@fivetechno.de> > --- > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > index 0b1e9337ee8e..5fc7c374a6b4 100644 > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > @@ -1169,6 +1169,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > /* do initial sync of usb state */ > ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); > + ret = 0; The bug was caused by the unexpected consequence of (mis|re)using the "ret" variable for a temporary value. Please introduce a new variable here, else the use of "ret" is even more confusing. This code also wipes out any error returned by devm_extcon_register_notifier(). Regards, Samuel
On Tue, Aug 23, 2022 at 5:41 AM Samuel Holland <samuel@sholland.org> wrote: > > On 8/22/22 5:32 AM, Peter Geis wrote: > > The otg sync state patch reuses the ret variable, but fails to set it to > > zero after use. This leads to a situation when the otg port is in > > peripheral mode where the otg phy aborts halfway through setup. Fix this > > by setting ret to zero after use. > > > > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") > > > > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > > Reported-by: Michael Riesch <michael.riesch@wolfvision.net> > > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > > Tested-by: Michael Riesch <michael.riesch@wolfvision.net> > > Tested-by: Markus Reichl <m.reichl@fivetechno.de> > > --- > > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > > index 0b1e9337ee8e..5fc7c374a6b4 100644 > > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > > @@ -1169,6 +1169,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > > /* do initial sync of usb state */ > > ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > > extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); > > + ret = 0; > > The bug was caused by the unexpected consequence of (mis|re)using the "ret" > variable for a temporary value. Please introduce a new variable here, else the > use of "ret" is even more confusing. This code also wipes out any error returned > by devm_extcon_register_notifier(). I see your point here, I also need to skip this if devm_extcon_register_notifier() fails as well. I'll spin up a v2. Thanks for catching that! > > Regards, > Samuel
Am Montag, 22. August 2022, 12:32:18 CEST schrieb Peter Geis: > The otg sync state patch reuses the ret variable, but fails to set it to > zero after use. This leads to a situation when the otg port is in > peripheral mode where the otg phy aborts halfway through setup. Fix this > by setting ret to zero after use. > > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") > > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net> > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net> > Tested-by: Markus Reichl <m.reichl@fivetechno.de> > --- > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > index 0b1e9337ee8e..5fc7c374a6b4 100644 > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > @@ -1169,6 +1169,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > /* do initial sync of usb state */ > ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); > + ret = 0; > } > } I also ran into that issue just now :-) . So am looking forward to v2. Thanks Heiko
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 0b1e9337ee8e..5fc7c374a6b4 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -1169,6 +1169,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, /* do initial sync of usb state */ ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); + ret = 0; } }
The otg sync state patch reuses the ret variable, but fails to set it to zero after use. This leads to a situation when the otg port is in peripheral mode where the otg phy aborts halfway through setup. Fix this by setting ret to zero after use. Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") Reported-by: Markus Reichl <m.reichl@fivetechno.de> Reported-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Tested-by: Markus Reichl <m.reichl@fivetechno.de> --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 1 + 1 file changed, 1 insertion(+)