| Message ID | 20220823144728.47068-1-pgwipeout@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] phy: rockchip-inno-usb2: Return zero after otg sync | expand |
Am Dienstag, 23. August 2022, 16:47:28 CEST schrieb Peter Geis: > The otg sync state patch reuses the ret variable, but fails to set it to > zero after use. This leads to a situation when the otg port is in > peripheral mode where the otg phy aborts halfway through setup. It also > fails to account for a failure to register the extcon notifier. Fix this > by using our own variable and skipping otg sync in case of failure. > > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") > > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net> > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net> > Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> > --- > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > index 0b1e9337ee8e..d579a22c61df 100644 > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > struct rockchip_usb2phy_port *rport, > struct device_node *child_np) > { > - int ret; > + int ret, id; > > rport->port_id = USB2PHY_PORT_OTG; > rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; > @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > EXTCON_USB_HOST, &rport->event_nb); > if (ret) > dev_err(rphy->dev, "register USB HOST notifier failed\n"); > + goto out; > > if (!of_property_read_bool(rphy->dev->of_node, "extcon")) { > /* do initial sync of usb state */ > - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); > + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id); > } > } > >
Hi Peter, On 8/23/22 16:47, Peter Geis wrote: > The otg sync state patch reuses the ret variable, but fails to set it to > zero after use. This leads to a situation when the otg port is in > peripheral mode where the otg phy aborts halfway through setup. It also > fails to account for a failure to register the extcon notifier. Fix this > by using our own variable and skipping otg sync in case of failure. > > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") > > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > Reported-by: Michael Riesch <michael.riesch@wolfvision.net> > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > Tested-by: Michael Riesch <michael.riesch@wolfvision.net> > Tested-by: Markus Reichl <m.reichl@fivetechno.de> > --- > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > index 0b1e9337ee8e..d579a22c61df 100644 > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > struct rockchip_usb2phy_port *rport, > struct device_node *child_np) > { > - int ret; > + int ret, id; > > rport->port_id = USB2PHY_PORT_OTG; > rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; > @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > EXTCON_USB_HOST, &rport->event_nb); > if (ret) This needs braces, right? if (ret) { > dev_err(rphy->dev, "register USB HOST notifier failed\n"); > + goto out; } With the braces the patch works as expected. Thanks and best regards, Michael > > if (!of_property_read_bool(rphy->dev->of_node, "extcon")) { > /* do initial sync of usb state */ > - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); > + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id); > } > } >
On Wed, Aug 24, 2022 at 7:33 AM Michael Riesch <michael.riesch@wolfvision.net> wrote: > > Hi Peter, > > On 8/23/22 16:47, Peter Geis wrote: > > The otg sync state patch reuses the ret variable, but fails to set it to > > zero after use. This leads to a situation when the otg port is in > > peripheral mode where the otg phy aborts halfway through setup. It also > > fails to account for a failure to register the extcon notifier. Fix this > > by using our own variable and skipping otg sync in case of failure. > > > > Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") > > > > Reported-by: Markus Reichl <m.reichl@fivetechno.de> > > Reported-by: Michael Riesch <michael.riesch@wolfvision.net> > > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > > Tested-by: Michael Riesch <michael.riesch@wolfvision.net> > > Tested-by: Markus Reichl <m.reichl@fivetechno.de> > > --- > > drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++--- > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > > index 0b1e9337ee8e..d579a22c61df 100644 > > --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > > +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c > > @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > > struct rockchip_usb2phy_port *rport, > > struct device_node *child_np) > > { > > - int ret; > > + int ret, id; > > > > rport->port_id = USB2PHY_PORT_OTG; > > rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; > > @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, > > EXTCON_USB_HOST, &rport->event_nb); > > if (ret) > > This needs braces, right? > > if (ret) { > > dev_err(rphy->dev, "register USB HOST notifier failed\n"); > > + goto out; > > } > > With the braces the patch works as expected. Yup, thanks for that. I hate working without access to my hardware. > > Thanks and best regards, > Michael > > > > > if (!of_property_read_bool(rphy->dev->of_node, "extcon")) { > > /* do initial sync of usb state */ > > - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > > - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); > > + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); > > + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id); > > } > > } > >
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 0b1e9337ee8e..d579a22c61df 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -1124,7 +1124,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, struct rockchip_usb2phy_port *rport, struct device_node *child_np) { - int ret; + int ret, id; rport->port_id = USB2PHY_PORT_OTG; rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; @@ -1164,11 +1164,12 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, EXTCON_USB_HOST, &rport->event_nb); if (ret) dev_err(rphy->dev, "register USB HOST notifier failed\n"); + goto out; if (!of_property_read_bool(rphy->dev->of_node, "extcon")) { /* do initial sync of usb state */ - ret = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); - extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !ret); + id = property_enabled(rphy->grf, &rport->port_cfg->utmi_id); + extcon_set_state_sync(rphy->edev, EXTCON_USB_HOST, !id); } }
The otg sync state patch reuses the ret variable, but fails to set it to zero after use. This leads to a situation when the otg port is in peripheral mode where the otg phy aborts halfway through setup. It also fails to account for a failure to register the extcon notifier. Fix this by using our own variable and skipping otg sync in case of failure. Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") Reported-by: Markus Reichl <m.reichl@fivetechno.de> Reported-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Tested-by: Markus Reichl <m.reichl@fivetechno.de> --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)