diff mbox series

[2/4] bindings: fpga: Add binding doc for the zynqmp afi config driver

Message ID 20220824035542.706433-3-nava.kishore.manne@amd.com (mailing list archive)
State New, archived
Headers show
Series Add afi config drivers support | expand

Commit Message

Nava kishore Manne Aug. 24, 2022, 3:55 a.m. UTC 
Xilinx Zynq US+ MPSoC platform connect the PS to the programmable
logic(PL) through the AXI port. This AXI port helps to establish
the data path between the PS and PL. In-order to establish the proper
communication data path between PS and PL the AXI port data path should
be configured with the proper Bus-width values.

This patch adds the binding document for the zynqmp afi config driver
to handle the AXI port bus-width configurations and PS-PL resets.

Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
---
 .../bindings/fpga/xlnx,zynqmp-afi-fpga.yaml   | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml

Comments

Krzysztof Kozlowski Aug. 24, 2022, 12:58 p.m. UTC | #1 
On 24/08/2022 06:55, Nava kishore Manne wrote:
> Xilinx Zynq US+ MPSoC platform connect the PS to the programmable
> logic(PL) through the AXI port. This AXI port helps to establish

Use subject prefixes matching the subsystem (git log --oneline -- ...).

> the data path between the PS and PL. In-order to establish the proper
> communication data path between PS and PL the AXI port data path should
> be configured with the proper Bus-width values.
> 
> This patch adds the binding document for the zynqmp afi config driver
> to handle the AXI port bus-width configurations and PS-PL resets.

Do not use "This commit/patch".
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

> 
> Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> ---
>  .../bindings/fpga/xlnx,zynqmp-afi-fpga.yaml   | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> new file mode 100644
> index 000000000000..faae4951e991
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-afi-fpga.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx ZynqMP AFI interface Manager.
> +
> +maintainers:
> +  - Nava kishore Manne <nava.kishore.manne@amd.com>
> +
> +description: The Zynq UltraScale+ MPSoC Processing System core provides access
> +  from PL masters to PS internal peripherals, and memory through AXI FIFO
> +  interface(AFI)
> +
> +properties:
> +  compatible:
> +    items:

No items, you have only one item.

> +      - enum:
> +          - xlnx,zynqmp-afi-fpga
> +
> +  resets:
> +    description:
> +      A list of phandles for resets listed in reset-names.

You need maxItems:4

> +
> +  reset-names:
> +    items:
> +      - const: pl0-rst
> +      - const: pl1-rst
> +      - const: pl2-rst
> +      - const: pl3-rst
> +
> +patternProperties:
> +  "^xlnx,afifm[0-6]-rd-bus-width$":
> +    description: bus width used to configure the afifm-rd interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +  "^xlnx,afifm[0-6]-wr-bus-width$":
> +    description: bus width used to configure the afifm-wr interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +  "^xlnx,afifs-ss[0-2]-bus-width$":
> +    description: bus width used to configure the afifs interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +required:
> +  - compatible
> +  - xlnx,afifm0-rd-bus-width
> +  - xlnx,afifm1-rd-bus-width
> +  - xlnx,afifm2-rd-bus-width
> +  - xlnx,afifm3-rd-bus-width
> +  - xlnx,afifm4-rd-bus-width
> +  - xlnx,afifm5-rd-bus-width
> +  - xlnx,afifm6-rd-bus-width
> +  - xlnx,afifm0-wr-bus-width
> +  - xlnx,afifm1-wr-bus-width
> +  - xlnx,afifm2-wr-bus-width
> +  - xlnx,afifm3-wr-bus-width
> +  - xlnx,afifm4-wr-bus-width
> +  - xlnx,afifm5-wr-bus-width
> +  - xlnx,afifm6-wr-bus-width
> +  - xlnx,afifs-ss0-bus-width
> +  - xlnx,afifs-ss1-bus-width
> +  - xlnx,afifs-ss2-bus-width
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
> +    zynqmp-afi {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation



Best regards,
Krzysztof
Nava kishore Manne Aug. 30, 2022, 5:31 a.m. UTC | #2 
Hi Krzysztof,

	Please find my response inline.

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Wednesday, August 24, 2022 6:29 PM
> To: Manne, Nava kishore <nava.kishore.manne@amd.com>; git (AMD-Xilinx)
> <git@amd.com>; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> michal.simek@xilinx.com; mdf@kernel.org; hao.wu@intel.com;
> yilun.xu@intel.com; trix@redhat.com; p.zabel@pengutronix.de;
> gregkh@linuxfoundation.org; ronak.jain@xilinx.com; rajan.vaja@xilinx.com;
> abhyuday.godhasara@xilinx.com; piyush.mehta@xilinx.com;
> lakshmi.sai.krishna.potthuri@xilinx.com; harsha.harsha@xilinx.com;
> linus.walleij@linaro.org; nava.manne@xilinx.com;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-fpga@vger.kernel.org
> Subject: Re: [PATCH 2/4] bindings: fpga: Add binding doc for the zynqmp afi
> config driver
> 
> On 24/08/2022 06:55, Nava kishore Manne wrote:
> > Xilinx Zynq US+ MPSoC platform connect the PS to the programmable
> > logic(PL) through the AXI port. This AXI port helps to establish
> 
> Use subject prefixes matching the subsystem (git log --oneline -- ...).
> 

Will fix in v2.

> > the data path between the PS and PL. In-order to establish the proper
> > communication data path between PS and PL the AXI port data path
> > should be configured with the proper Bus-width values.
> >
> > This patch adds the binding document for the zynqmp afi config driver
> > to handle the AXI port bus-width configurations and PS-PL resets.
> 
> Do not use "This commit/patch".
> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/sub
> mitting-patches.rst#L95
> 

Will fix in v2.

> >
> > Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> > ---
> >  .../bindings/fpga/xlnx,zynqmp-afi-fpga.yaml   | 100 ++++++++++++++++++
> >  1 file changed, 100 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> > b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> > new file mode 100644
> > index 000000000000..faae4951e991
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-
> fpga.yaml
> > @@ -0,0 +1,100 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-afi-fpga.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx ZynqMP AFI interface Manager.
> > +
> > +maintainers:
> > +  - Nava kishore Manne <nava.kishore.manne@amd.com>
> > +
> > +description: The Zynq UltraScale+ MPSoC Processing System core
> > +provides access
> > +  from PL masters to PS internal peripherals, and memory through AXI
> > +FIFO
> > +  interface(AFI)
> > +
> > +properties:
> > +  compatible:
> > +    items:
> 
> No items, you have only one item.
> 

Will fix in v2.

> > +      - enum:
> > +          - xlnx,zynqmp-afi-fpga
> > +
> > +  resets:
> > +    description:
> > +      A list of phandles for resets listed in reset-names.
> 
> You need maxItems:4
> 

Will fix in v2.

> > +
> > +  reset-names:
> > +    items:
> > +      - const: pl0-rst
> > +      - const: pl1-rst
> > +      - const: pl2-rst
> > +      - const: pl3-rst
> > +
> > +patternProperties:
> > +  "^xlnx,afifm[0-6]-rd-bus-width$":
> > +    description: bus width used to configure the afifm-rd interface.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [ 32, 64, 128 ]
> > +
> > +  "^xlnx,afifm[0-6]-wr-bus-width$":
> > +    description: bus width used to configure the afifm-wr interface.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [ 32, 64, 128 ]
> > +
> > +  "^xlnx,afifs-ss[0-2]-bus-width$":
> > +    description: bus width used to configure the afifs interface.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [ 32, 64, 128 ]
> > +
> > +required:
> > +  - compatible
> > +  - xlnx,afifm0-rd-bus-width
> > +  - xlnx,afifm1-rd-bus-width
> > +  - xlnx,afifm2-rd-bus-width
> > +  - xlnx,afifm3-rd-bus-width
> > +  - xlnx,afifm4-rd-bus-width
> > +  - xlnx,afifm5-rd-bus-width
> > +  - xlnx,afifm6-rd-bus-width
> > +  - xlnx,afifm0-wr-bus-width
> > +  - xlnx,afifm1-wr-bus-width
> > +  - xlnx,afifm2-wr-bus-width
> > +  - xlnx,afifm3-wr-bus-width
> > +  - xlnx,afifm4-wr-bus-width
> > +  - xlnx,afifm5-wr-bus-width
> > +  - xlnx,afifm6-wr-bus-width
> > +  - xlnx,afifs-ss0-bus-width
> > +  - xlnx,afifs-ss1-bus-width
> > +  - xlnx,afifs-ss2-bus-width
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
> > +    zynqmp-afi {
> 
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-
> devicetree-basics.html#generic-names-recommendation
> 

Will fix in v2.

Regards,
Navakishore.
Rob Herring (Arm) Aug. 30, 2022, 6:25 p.m. UTC | #3 
On Wed, Aug 24, 2022 at 09:25:40AM +0530, Nava kishore Manne wrote:
> Xilinx Zynq US+ MPSoC platform connect the PS to the programmable
> logic(PL) through the AXI port. This AXI port helps to establish
> the data path between the PS and PL. In-order to establish the proper
> communication data path between PS and PL the AXI port data path should
> be configured with the proper Bus-width values.
> 
> This patch adds the binding document for the zynqmp afi config driver
> to handle the AXI port bus-width configurations and PS-PL resets.
> 
> Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> ---
>  .../bindings/fpga/xlnx,zynqmp-afi-fpga.yaml   | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> new file mode 100644
> index 000000000000..faae4951e991
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-afi-fpga.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx ZynqMP AFI interface Manager.
> +
> +maintainers:
> +  - Nava kishore Manne <nava.kishore.manne@amd.com>
> +
> +description: The Zynq UltraScale+ MPSoC Processing System core provides access
> +  from PL masters to PS internal peripherals, and memory through AXI FIFO
> +  interface(AFI)
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - xlnx,zynqmp-afi-fpga
> +
> +  resets:
> +    description:
> +      A list of phandles for resets listed in reset-names.
> +
> +  reset-names:
> +    items:
> +      - const: pl0-rst
> +      - const: pl1-rst
> +      - const: pl2-rst
> +      - const: pl3-rst

Not all that useful of names given it is just indices. Minimally, '-rst' 
is redundant and I don't know what 'pl' means.

> +
> +patternProperties:
> +  "^xlnx,afifm[0-6]-rd-bus-width$":
> +    description: bus width used to configure the afifm-rd interface.

...width in bits...

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +  "^xlnx,afifm[0-6]-wr-bus-width$":

Can combine these 2:

"^xlnx,afifm[0-6]-(wr|rd)-bus-width$"

> +    description: bus width used to configure the afifm-wr interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +  "^xlnx,afifs-ss[0-2]-bus-width$":
> +    description: bus width used to configure the afifs interface.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 32, 64, 128 ]
> +
> +required:
> +  - compatible
> +  - xlnx,afifm0-rd-bus-width
> +  - xlnx,afifm1-rd-bus-width
> +  - xlnx,afifm2-rd-bus-width
> +  - xlnx,afifm3-rd-bus-width
> +  - xlnx,afifm4-rd-bus-width
> +  - xlnx,afifm5-rd-bus-width
> +  - xlnx,afifm6-rd-bus-width
> +  - xlnx,afifm0-wr-bus-width
> +  - xlnx,afifm1-wr-bus-width
> +  - xlnx,afifm2-wr-bus-width
> +  - xlnx,afifm3-wr-bus-width
> +  - xlnx,afifm4-wr-bus-width
> +  - xlnx,afifm5-wr-bus-width
> +  - xlnx,afifm6-wr-bus-width
> +  - xlnx,afifs-ss0-bus-width
> +  - xlnx,afifs-ss1-bus-width
> +  - xlnx,afifs-ss2-bus-width
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
> +    zynqmp-afi {
> +      compatible = "xlnx,zynqmp-afi-fpga";
> +      xlnx,afifm0-rd-bus-width = <32>;
> +      xlnx,afifm1-rd-bus-width = <32>;
> +      xlnx,afifm2-rd-bus-width = <64>;
> +      xlnx,afifm3-rd-bus-width = <128>;
> +      xlnx,afifm4-rd-bus-width = <32>;
> +      xlnx,afifm5-rd-bus-width = <64>;
> +      xlnx,afifm6-rd-bus-width = <128>;
> +      xlnx,afifm0-wr-bus-width = <32>;
> +      xlnx,afifm1-wr-bus-width = <32>;
> +      xlnx,afifm2-wr-bus-width = <64>;
> +      xlnx,afifm3-wr-bus-width = <128>;
> +      xlnx,afifm4-wr-bus-width = <32>;
> +      xlnx,afifm5-wr-bus-width = <64>;
> +      xlnx,afifm6-wr-bus-width = <128>;
> +      xlnx,afifs-ss0-bus-width = <64>;
> +      xlnx,afifs-ss1-bus-width = <64>;
> +      xlnx,afifs-ss2-bus-width = <64>;
> +      resets = <&zynqmp_reset ZYNQMP_RESET_PS_PL0>,
> +               <&zynqmp_reset ZYNQMP_RESET_PS_PL1>,
> +               <&zynqmp_reset ZYNQMP_RESET_PS_PL2>,
> +               <&zynqmp_reset ZYNQMP_RESET_PS_PL3>;
> +      reset-names = "pl0-rst", "pl1-rst", "pl2-rst", "pl3-rst";

Should devices on this bus be child devices or do they fit on some other 
bus?

> +    };
> +
> +...
> -- 
> 2.25.1
> 
>
Rob Herring (Arm) Aug. 30, 2022, 6:27 p.m. UTC | #4 
On Tue, Aug 30, 2022 at 05:31:07AM +0000, Manne, Nava kishore wrote:
> Hi Krzysztof,
> 
> 	Please find my response inline.
> 
> > -----Original Message-----
> > From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Sent: Wednesday, August 24, 2022 6:29 PM
> > To: Manne, Nava kishore <nava.kishore.manne@amd.com>; git (AMD-Xilinx)
> > <git@amd.com>; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> > michal.simek@xilinx.com; mdf@kernel.org; hao.wu@intel.com;
> > yilun.xu@intel.com; trix@redhat.com; p.zabel@pengutronix.de;
> > gregkh@linuxfoundation.org; ronak.jain@xilinx.com; rajan.vaja@xilinx.com;
> > abhyuday.godhasara@xilinx.com; piyush.mehta@xilinx.com;
> > lakshmi.sai.krishna.potthuri@xilinx.com; harsha.harsha@xilinx.com;
> > linus.walleij@linaro.org; nava.manne@xilinx.com;
> > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> > kernel@vger.kernel.org; linux-fpga@vger.kernel.org
> > Subject: Re: [PATCH 2/4] bindings: fpga: Add binding doc for the zynqmp afi
> > config driver
> > 
> > On 24/08/2022 06:55, Nava kishore Manne wrote:
> > > Xilinx Zynq US+ MPSoC platform connect the PS to the programmable
> > > logic(PL) through the AXI port. This AXI port helps to establish
> > 
> > Use subject prefixes matching the subsystem (git log --oneline -- ...).
> > 
> 
> Will fix in v2.

This is what we assume. No need to reply back with agreement, and save 
us some mail to read.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
new file mode 100644
index 000000000000..faae4951e991
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
@@ -0,0 +1,100 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-afi-fpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP AFI interface Manager.
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: The Zynq UltraScale+ MPSoC Processing System core provides access
+  from PL masters to PS internal peripherals, and memory through AXI FIFO
+  interface(AFI)
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,zynqmp-afi-fpga
+
+  resets:
+    description:
+      A list of phandles for resets listed in reset-names.
+
+  reset-names:
+    items:
+      - const: pl0-rst
+      - const: pl1-rst
+      - const: pl2-rst
+      - const: pl3-rst
+
+patternProperties:
+  "^xlnx,afifm[0-6]-rd-bus-width$":
+    description: bus width used to configure the afifm-rd interface.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 32, 64, 128 ]
+
+  "^xlnx,afifm[0-6]-wr-bus-width$":
+    description: bus width used to configure the afifm-wr interface.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 32, 64, 128 ]
+
+  "^xlnx,afifs-ss[0-2]-bus-width$":
+    description: bus width used to configure the afifs interface.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 32, 64, 128 ]
+
+required:
+  - compatible
+  - xlnx,afifm0-rd-bus-width
+  - xlnx,afifm1-rd-bus-width
+  - xlnx,afifm2-rd-bus-width
+  - xlnx,afifm3-rd-bus-width
+  - xlnx,afifm4-rd-bus-width
+  - xlnx,afifm5-rd-bus-width
+  - xlnx,afifm6-rd-bus-width
+  - xlnx,afifm0-wr-bus-width
+  - xlnx,afifm1-wr-bus-width
+  - xlnx,afifm2-wr-bus-width
+  - xlnx,afifm3-wr-bus-width
+  - xlnx,afifm4-wr-bus-width
+  - xlnx,afifm5-wr-bus-width
+  - xlnx,afifm6-wr-bus-width
+  - xlnx,afifs-ss0-bus-width
+  - xlnx,afifs-ss1-bus-width
+  - xlnx,afifs-ss2-bus-width
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    zynqmp-afi {
+      compatible = "xlnx,zynqmp-afi-fpga";
+      xlnx,afifm0-rd-bus-width = <32>;
+      xlnx,afifm1-rd-bus-width = <32>;
+      xlnx,afifm2-rd-bus-width = <64>;
+      xlnx,afifm3-rd-bus-width = <128>;
+      xlnx,afifm4-rd-bus-width = <32>;
+      xlnx,afifm5-rd-bus-width = <64>;
+      xlnx,afifm6-rd-bus-width = <128>;
+      xlnx,afifm0-wr-bus-width = <32>;
+      xlnx,afifm1-wr-bus-width = <32>;
+      xlnx,afifm2-wr-bus-width = <64>;
+      xlnx,afifm3-wr-bus-width = <128>;
+      xlnx,afifm4-wr-bus-width = <32>;
+      xlnx,afifm5-wr-bus-width = <64>;
+      xlnx,afifm6-wr-bus-width = <128>;
+      xlnx,afifs-ss0-bus-width = <64>;
+      xlnx,afifs-ss1-bus-width = <64>;
+      xlnx,afifs-ss2-bus-width = <64>;
+      resets = <&zynqmp_reset ZYNQMP_RESET_PS_PL0>,
+               <&zynqmp_reset ZYNQMP_RESET_PS_PL1>,
+               <&zynqmp_reset ZYNQMP_RESET_PS_PL2>,
+               <&zynqmp_reset ZYNQMP_RESET_PS_PL3>;
+      reset-names = "pl0-rst", "pl1-rst", "pl2-rst", "pl3-rst";
+    };
+
+...