| Message ID | 20220824223700.32442-4-leoyang.li@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | accumulated dts updates for ls1043a | expand |
On Wed, Aug 24, 2022 at 05:36:54PM -0500, Li Yang wrote: > After the binding has been updated to include more specific interrupt > definition, update the dts to use the more specific interrupt names. > > Signed-off-by: Po Liu <po.liu@nxp.com> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > Signed-off-by: Li Yang <leoyang.li@nxp.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++--------- > 1 file changed, 9 insertions(+), 9 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > index 3ba66b18de35..242fe8bfab17 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > @@ -883,9 +883,9 @@ pcie1: pcie@3400000 { > reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ > <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ > reg-names = "regs", "config"; > - interrupts = <0 118 0x4>, /* controller interrupt */ > - <0 117 0x4>; /* PME interrupt */ > - interrupt-names = "intr", "pme"; > + interrupts = <0 117 0x4>, > + <0 118 0x4>; While at it, could you use IRQ_TYPE_LEVEL_HIGH for the polarity cell? Shawn > + interrupt-names = "pme", "aer"; > #address-cells = <3>; > #size-cells = <2>; > device_type = "pci"; > @@ -909,9 +909,9 @@ pcie2: pcie@3500000 { > reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ > <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ > reg-names = "regs", "config"; > - interrupts = <0 128 0x4>, > - <0 127 0x4>; > - interrupt-names = "intr", "pme"; > + interrupts = <0 127 0x4>, > + <0 128 0x4>; > + interrupt-names = "pme", "aer"; > #address-cells = <3>; > #size-cells = <2>; > device_type = "pci"; > @@ -935,9 +935,9 @@ pcie3: pcie@3600000 { > reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ > <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ > reg-names = "regs", "config"; > - interrupts = <0 162 0x4>, > - <0 161 0x4>; > - interrupt-names = "intr", "pme"; > + interrupts = <0 161 0x4>, > + <0 162 0x4>; > + interrupt-names = "pme", "aer"; > #address-cells = <3>; > #size-cells = <2>; > device_type = "pci"; > -- > 2.37.1 >
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 3ba66b18de35..242fe8bfab17 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -883,9 +883,9 @@ pcie1: pcie@3400000 { reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "intr", "pme"; + interrupts = <0 117 0x4>, + <0 118 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -909,9 +909,9 @@ pcie2: pcie@3500000 { reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 128 0x4>, - <0 127 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 127 0x4>, + <0 128 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -935,9 +935,9 @@ pcie3: pcie@3600000 { reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 162 0x4>, - <0 161 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 161 0x4>, + <0 162 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci";