@@ -27,6 +27,46 @@
#include "protocols.h"
#include "notify.h"
+#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
+
+enum scmi_error_codes {
+ SCMI_SUCCESS = 0, /* Success */
+ SCMI_ERR_SUPPORT = -1, /* Not supported */
+ SCMI_ERR_PARAMS = -2, /* Invalid Parameters */
+ SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */
+ SCMI_ERR_ENTRY = -4, /* Not found */
+ SCMI_ERR_RANGE = -5, /* Value out of range */
+ SCMI_ERR_BUSY = -6, /* Device busy */
+ SCMI_ERR_COMMS = -7, /* Communication Error */
+ SCMI_ERR_GENERIC = -8, /* Generic Error */
+ SCMI_ERR_HARDWARE = -9, /* Hardware Error */
+ SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
+};
+
+static const int scmi_linux_errmap[] = {
+ /* better than switch case as long as return value is continuous */
+ 0, /* SCMI_SUCCESS */
+ -EOPNOTSUPP, /* SCMI_ERR_SUPPORT */
+ -EINVAL, /* SCMI_ERR_PARAM */
+ -EACCES, /* SCMI_ERR_ACCESS */
+ -ENOENT, /* SCMI_ERR_ENTRY */
+ -ERANGE, /* SCMI_ERR_RANGE */
+ -EBUSY, /* SCMI_ERR_BUSY */
+ -ECOMM, /* SCMI_ERR_COMMS */
+ -EIO, /* SCMI_ERR_GENERIC */
+ -EREMOTEIO, /* SCMI_ERR_HARDWARE */
+ -EPROTO, /* SCMI_ERR_PROTOCOL */
+};
+
+static inline int scmi_to_linux_errno(int errno)
+{
+ int err_idx = -errno;
+
+ if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
+ return scmi_linux_errmap[err_idx];
+ return -EIO;
+}
+
#define MSG_ID_MASK GENMASK(7, 0)
#define MSG_XTRACT_ID(hdr) FIELD_GET(MSG_ID_MASK, (hdr))
#define MSG_TYPE_MASK GENMASK(9, 8)
@@ -37,20 +37,6 @@
#define CREATE_TRACE_POINTS
#include <trace/events/scmi.h>
-enum scmi_error_codes {
- SCMI_SUCCESS = 0, /* Success */
- SCMI_ERR_SUPPORT = -1, /* Not supported */
- SCMI_ERR_PARAMS = -2, /* Invalid Parameters */
- SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */
- SCMI_ERR_ENTRY = -4, /* Not found */
- SCMI_ERR_RANGE = -5, /* Value out of range */
- SCMI_ERR_BUSY = -6, /* Device busy */
- SCMI_ERR_COMMS = -7, /* Communication Error */
- SCMI_ERR_GENERIC = -8, /* Generic Error */
- SCMI_ERR_HARDWARE = -9, /* Hardware Error */
- SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
-};
-
/* List of all SCMI devices active in system */
static LIST_HEAD(scmi_list);
/* Protection for the entire list */
@@ -170,30 +156,6 @@ struct scmi_info {
#define handle_to_scmi_info(h) container_of(h, struct scmi_info, handle)
-static const int scmi_linux_errmap[] = {
- /* better than switch case as long as return value is continuous */
- 0, /* SCMI_SUCCESS */
- -EOPNOTSUPP, /* SCMI_ERR_SUPPORT */
- -EINVAL, /* SCMI_ERR_PARAM */
- -EACCES, /* SCMI_ERR_ACCESS */
- -ENOENT, /* SCMI_ERR_ENTRY */
- -ERANGE, /* SCMI_ERR_RANGE */
- -EBUSY, /* SCMI_ERR_BUSY */
- -ECOMM, /* SCMI_ERR_COMMS */
- -EIO, /* SCMI_ERR_GENERIC */
- -EREMOTEIO, /* SCMI_ERR_HARDWARE */
- -EPROTO, /* SCMI_ERR_PROTOCOL */
-};
-
-static inline int scmi_to_linux_errno(int errno)
-{
- int err_idx = -errno;
-
- if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
- return scmi_linux_errmap[err_idx];
- return -EIO;
-}
-
void scmi_notification_instance_data_set(const struct scmi_handle *handle,
void *priv)
{
@@ -1078,8 +1040,6 @@ static void reset_rx_to_maxsz(const struct scmi_protocol_handle *ph,
xfer->rx.len = info->desc->max_msg_size;
}
-#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
-
/**
* do_xfer_with_response() - Do one transfer and wait until the delayed
* response is received
Move SCMI error codes definitions and helper to the common.h header together with the delayed response timeout define. No functional change. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> --- drivers/firmware/arm_scmi/common.h | 40 ++++++++++++++++++++++++++++++ drivers/firmware/arm_scmi/driver.c | 40 ------------------------------ 2 files changed, 40 insertions(+), 40 deletions(-)