From patchwork Fri Aug 26 14:46:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Ilpo_J=C3=A4rvinen?= X-Patchwork-Id: 12956145 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 737B7ECAAD4 for ; Fri, 26 Aug 2022 14:48:50 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=bNQLKu8SuwFgNnzkKgEgIEBC34EwyLz0ZQgTEXjmjQY=; b=euXkQYkw7rCQwr AM+DIqS4qATEPIvdhKXtlbDbYxZrwn18PPwrB/9Qmq/sCArD1qim04dLtkVyNqe7OlLFgP+YbjAae eBhfW7lTzBO1wtzTwzSvDpjkgzz2V/KzyJHqXnOTWrYIp3u4EekQaf876dlOmPWoVxQfkSmZYLVzR QuXD60LlWGMWVC9bnuEi8178vc/ELjSjHFrE23nThEMGDnnp1EygoTcfbgsknzlWwulVunienZNzD 5iZCwoPstWI/c3RzXT8HVCPnSlLr2XBpdqeIFVdUFwAQlwzlnmnCo6nHpPgznb86qyUvoru8ZNeDi k1IfzGgNJQ5QiDilkI5w==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1oRacC-006Sbo-L2; Fri, 26 Aug 2022 14:47:20 +0000 Received: from mga09.intel.com ([134.134.136.24]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1oRac6-006SQ1-JK for linux-arm-kernel@lists.infradead.org; Fri, 26 Aug 2022 14:47:18 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1661525234; x=1693061234; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=+9WLc5C172ycFMdRe1d0gEXq1sKMGhIlzTBQWSRwNto=; b=nKl9dbxHuAI18yBQ1oLq3wYxWgqltbQ+tjNP5lJypHCNUjPvZUi+1DbA ZCcVWjlZGf2KT8CEfjT62qsrVXjvn/lh9ZZFozcU3a55QPNgGN1gl2Srz TkkeD84e0yIBb568CFk0IM7cvhJXyxAZrMv9D9gO3l8Y9s/F3MJH6IRKS 26wvZn+hgvJWLI/pgBJMfFj3q61e/gD3UNDB25pW6vZineFKIGm767Qq7 C9jkWNSKk/w/TI812/reIvCLeZXO54JFaFJXPeFx1pOgB8dun4KM+MDNB Jz9uuv4uH6iwMeQxXmpAj1Ljc3b13i4Wej0TtaPcHv1UhWxgQcbryi4oq Q==; X-IronPort-AV: E=McAfee;i="6500,9779,10451"; a="295298552" X-IronPort-AV: E=Sophos;i="5.93,265,1654585200"; d="scan'208";a="295298552" Received: from fmsmga008.fm.intel.com ([10.253.24.58]) by orsmga102.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 26 Aug 2022 07:46:53 -0700 X-IronPort-AV: E=Sophos;i="5.93,265,1654585200"; d="scan'208";a="671488400" Received: from syeghiay-mobl.ger.corp.intel.com (HELO ijarvine-MOBL2.ger.corp.intel.com) ([10.252.41.100]) by fmsmga008-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 26 Aug 2022 07:46:47 -0700 From: =?utf-8?q?Ilpo_J=C3=A4rvinen?= To: Greg Kroah-Hartman , Jiri Slaby , linux-serial@vger.kernel.org, Jonathan Corbet , =?utf-8?q?Ilpo_J=C3=A4rvinen?= , Andy Shevchenko , Vladimir Zapolskiy , Russell King , Richard Genoud , Nicolas Ferre , Alexandre Belloni , Claudiu Beznea , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Maxime Coquelin , Alexandre Torgue , linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com Cc: Lino Sanfilippo Subject: [PATCH 3/3] serial: Add kserial_rs485 to avoid wasted space due to .padding Date: Fri, 26 Aug 2022 17:46:29 +0300 Message-Id: <20220826144629.11507-4-ilpo.jarvinen@linux.intel.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20220826144629.11507-1-ilpo.jarvinen@linux.intel.com> References: <20220826144629.11507-1-ilpo.jarvinen@linux.intel.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220826_074714_843703_2A805B48 X-CRM114-Status: GOOD ( 22.03 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Struct serial_rs485 has a .padding field to make uapi updates easier. It wastes space, however. Create struct kserial_rs485 which is a kerner counterpart w/o padding. kernel_serial_rs485_to_user_rs485()'s rs485 can now become const as padding is dealt within the local variable. Signed-off-by: Ilpo Järvinen --- .../driver-api/serial/serial-rs485.rst | 2 +- drivers/tty/serial/8250/8250.h | 4 +- drivers/tty/serial/8250/8250_dwlib.c | 6 +-- drivers/tty/serial/8250/8250_exar.c | 12 ++--- drivers/tty/serial/8250/8250_fintek.c | 6 +-- drivers/tty/serial/8250/8250_lpc18xx.c | 4 +- drivers/tty/serial/8250/8250_pci.c | 4 +- drivers/tty/serial/8250/8250_port.c | 4 +- drivers/tty/serial/amba-pl011.c | 4 +- drivers/tty/serial/ar933x_uart.c | 8 ++-- drivers/tty/serial/atmel_serial.c | 4 +- drivers/tty/serial/fsl_lpuart.c | 6 +-- drivers/tty/serial/imx.c | 6 +-- drivers/tty/serial/max310x.c | 4 +- drivers/tty/serial/mcf.c | 4 +- drivers/tty/serial/omap-serial.c | 6 +-- drivers/tty/serial/sc16is7xx.c | 6 +-- drivers/tty/serial/serial_core.c | 48 +++++++++++++------ drivers/tty/serial/stm32-usart.c | 12 ++--- include/linux/serial_core.h | 20 ++++++-- include/uapi/linux/serial.h | 3 +- 21 files changed, 104 insertions(+), 69 deletions(-) diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst index 6ebad75c74ed..7e496336a01b 100644 --- a/Documentation/driver-api/serial/serial-rs485.rst +++ b/Documentation/driver-api/serial/serial-rs485.rst @@ -41,7 +41,7 @@ RS485 Serial Communications implement the rs485_config callback and provide rs485_supported in the uart_port structure. The serial core calls rs485_config to do the device specific part in response to TIOCSRS485 ioctl (see below). The rs485_config - callback receives a pointer to a sanitizated serial_rs485 structure. The + callback receives a pointer to a sanitizated kserial_rs485 structure. The serial_rs485 userspace provides is sanitized before calling rs485_config using rs485_supported that indicates what RS485 features the driver supports for the uart_port. TIOCGRS485 ioctl can be used to read back the diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 287153d32536..4e22f8d50e91 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -204,11 +204,11 @@ void serial8250_rpm_get_tx(struct uart_8250_port *p); void serial8250_rpm_put_tx(struct uart_8250_port *p); int serial8250_em485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485); + struct kserial_rs485 *rs485); void serial8250_em485_start_tx(struct uart_8250_port *p); void serial8250_em485_stop_tx(struct uart_8250_port *p); void serial8250_em485_destroy(struct uart_8250_port *p); -extern struct serial_rs485 serial8250_em485_supported; +extern struct kserial_rs485 serial8250_em485_supported; /* MCR <-> TIOCM conversion */ static inline int serial8250_TIOCM_to_MCR(int tiocm) diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index dbe4d44f60d4..a628ed2c235b 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -134,7 +134,7 @@ static void dw8250_update_rar(struct uart_port *p, u32 addr) dw8250_writel_ext(p, DW_UART_RE_EN, re_en); } -static void dw8250_rs485_set_addr(struct uart_port *p, struct serial_rs485 *rs485, +static void dw8250_rs485_set_addr(struct uart_port *p, struct kserial_rs485 *rs485, struct ktermios *termios) { u32 lcr = dw8250_readl_ext(p, DW_UART_LCR_EXT); @@ -177,7 +177,7 @@ static void dw8250_rs485_set_addr(struct uart_port *p, struct serial_rs485 *rs48 } static int dw8250_rs485_config(struct uart_port *p, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { u32 tcr; @@ -232,7 +232,7 @@ static bool dw8250_detect_rs485_hw(struct uart_port *p) return reg; } -static const struct serial_rs485 dw8250_rs485_supported = { +static const struct kserial_rs485 dw8250_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | SER_RS485_ADDRB | SER_RS485_ADDR_RECV | SER_RS485_ADDR_DEST, diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 314a05e009df..9fef2056a9b5 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -113,8 +113,8 @@ struct exar8250; struct exar8250_platform { int (*rs485_config)(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485); - const struct serial_rs485 *rs485_supported; + struct kserial_rs485 *rs485); + const struct kserial_rs485 *rs485_supported; int (*register_gpio)(struct pci_dev *, struct uart_8250_port *); void (*unregister_gpio)(struct uart_8250_port *); }; @@ -411,7 +411,7 @@ static void xr17v35x_unregister_gpio(struct uart_8250_port *port) } static int generic_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); u8 __iomem *p = port->membase; @@ -431,7 +431,7 @@ static int generic_rs485_config(struct uart_port *port, struct ktermios *termios return 0; } -static const struct serial_rs485 generic_rs485_supported = { +static const struct kserial_rs485 generic_rs485_supported = { .flags = SER_RS485_ENABLED, }; @@ -443,7 +443,7 @@ static const struct exar8250_platform exar8250_default_platform = { }; static int iot2040_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); u8 __iomem *p = port->membase; @@ -475,7 +475,7 @@ static int iot2040_rs485_config(struct uart_port *port, struct ktermios *termios return generic_rs485_config(port, termios, rs485); } -static const struct serial_rs485 iot2040_rs485_supported = { +static const struct kserial_rs485 iot2040_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS, }; diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 65b6b3cbaff6..d3d2e25dd06b 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -192,7 +192,7 @@ static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min, } static int fintek_8250_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { uint8_t config = 0; struct fintek_8250 *pdata = port->private_data; @@ -411,13 +411,13 @@ static int probe_setup_port(struct fintek_8250 *pdata, } /* Only the first port supports delays */ -static const struct serial_rs485 fintek_8250_rs485_supported_port0 = { +static const struct kserial_rs485 fintek_8250_rs485_supported_port0 = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND, .delay_rts_before_send = 1, .delay_rts_after_send = 1, }; -static const struct serial_rs485 fintek_8250_rs485_supported = { +static const struct kserial_rs485 fintek_8250_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND, }; diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c index 6dc85aaba5d0..0619427683cf 100644 --- a/drivers/tty/serial/8250/8250_lpc18xx.c +++ b/drivers/tty/serial/8250/8250_lpc18xx.c @@ -33,7 +33,7 @@ struct lpc18xx_uart_data { }; static int lpc18xx_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct uart_8250_port *up = up_to_u8250p(port); u32 rs485_ctrl_reg = 0; @@ -81,7 +81,7 @@ static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value) writel(value, p->membase + offset); } -static const struct serial_rs485 lpc18xx_rs485_supported = { +static const struct kserial_rs485 lpc18xx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND, .delay_rts_after_send = 1, /* Delay RTS before send is not supported */ diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6f66dc2ebacc..8675b0d9658d 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1554,7 +1554,7 @@ pci_brcm_trumanage_setup(struct serial_private *priv, /* We should do proper H/W transceiver setting before change to RS485 mode */ static int pci_fintek_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct pci_dev *pci_dev = to_pci_dev(port->dev); u8 setting; @@ -1583,7 +1583,7 @@ static int pci_fintek_rs485_config(struct uart_port *port, struct ktermios *term return 0; } -static const struct serial_rs485 pci_fintek_rs485_supported = { +static const struct kserial_rs485 pci_fintek_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND, /* F81504/508/512 does not support RTS delay before or after send */ }; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 39b35a61958c..2345b6fbac6d 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -647,7 +647,7 @@ void serial8250_em485_destroy(struct uart_8250_port *p) } EXPORT_SYMBOL_GPL(serial8250_em485_destroy); -struct serial_rs485 serial8250_em485_supported = { +struct kserial_rs485 serial8250_em485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | SER_RS485_TERMINATE_BUS | SER_RS485_RX_DURING_TX, .delay_rts_before_send = 1, @@ -665,7 +665,7 @@ EXPORT_SYMBOL_GPL(serial8250_em485_supported); * hardware, relying on software emulation instead. */ int serial8250_em485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct uart_8250_port *up = up_to_u8250p(port); diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 15f0e4d88c5a..e78cd0759dc1 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2215,7 +2215,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) } static int pl011_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); @@ -2765,7 +2765,7 @@ static int pl011_register_port(struct uart_amba_port *uap) return ret; } -static const struct serial_rs485 pl011_rs485_supported = { +static const struct kserial_rs485 pl011_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX, .delay_rts_before_send = 1, diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 32caeac12985..30c716b4a105 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -391,7 +391,7 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) { struct circ_buf *xmit = &up->port.state->xmit; - struct serial_rs485 *rs485conf = &up->port.rs485; + struct kserial_rs485 *rs485conf = &up->port.rs485; int count; bool half_duplex_send = false; @@ -581,7 +581,7 @@ static const struct uart_ops ar933x_uart_ops = { }; static int ar933x_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485conf) + struct kserial_rs485 *rs485conf) { return 0; } @@ -693,8 +693,8 @@ static struct uart_driver ar933x_uart_driver = { .cons = NULL, /* filled in runtime */ }; -static const struct serial_rs485 ar933x_no_rs485 = {}; -static const struct serial_rs485 ar933x_rs485_supported = { +static const struct kserial_rs485 ar933x_no_rs485 = {}; +static const struct kserial_rs485 ar933x_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND, }; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 30ba9eef7b39..be0296714585 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -284,7 +284,7 @@ static void atmel_tasklet_schedule(struct atmel_uart_port *atmel_port, /* Enable or disable the rs485 support */ static int atmel_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485conf) + struct kserial_rs485 *rs485conf) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned int mode; @@ -2471,7 +2471,7 @@ static const struct uart_ops atmel_pops = { #endif }; -static const struct serial_rs485 atmel_rs485_supported = { +static const struct kserial_rs485 atmel_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX, .delay_rts_before_send = 1, .delay_rts_after_send = 1, diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index f6c33cd228c8..7b28cb8bee1e 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1374,7 +1374,7 @@ static void lpuart_dma_rx_free(struct uart_port *port) } static int lpuart_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); @@ -1404,7 +1404,7 @@ static int lpuart_config_rs485(struct uart_port *port, struct ktermios *termios, } static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); @@ -2633,7 +2633,7 @@ static struct uart_driver lpuart_reg = { .cons = LPUART_CONSOLE, }; -static const struct serial_rs485 lpuart_rs485_supported = { +static const struct kserial_rs485 lpuart_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND, /* delay_rts_* and RX_DURING_TX are not supported */ }; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 522445a8f666..0768e8270153 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1908,7 +1908,7 @@ static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c) /* called with port.lock taken and irqs off or from .probe without locking */ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485conf) + struct kserial_rs485 *rs485conf) { struct imx_port *sport = (struct imx_port *)port; u32 ucr2; @@ -2196,8 +2196,8 @@ static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t) return HRTIMER_NORESTART; } -static const struct serial_rs485 imx_no_rs485 = {}; /* No RS485 if no RTS */ -static const struct serial_rs485 imx_rs485_supported = { +static const struct kserial_rs485 imx_no_rs485 = {}; /* No RS485 if no RTS */ +static const struct kserial_rs485 imx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX, .delay_rts_before_send = 1, diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index ab10ca4a45b5..6a8ab63d1072 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1037,7 +1037,7 @@ static void max310x_rs_proc(struct work_struct *ws) } static int max310x_rs485_config(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct max310x_one *one = to_max310x_port(port); @@ -1257,7 +1257,7 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, } #endif -static const struct serial_rs485 max310x_rs485_supported = { +static const struct kserial_rs485 max310x_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX, .delay_rts_before_send = 1, .delay_rts_after_send = 1, diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index f4aaaadd0742..9c86218ae29d 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -432,7 +432,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /* Enable or disable the RS485 support */ static int mcf_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { unsigned char mr1, mr2; @@ -453,7 +453,7 @@ static int mcf_config_rs485(struct uart_port *port, struct ktermios *termios, return 0; } -static const struct serial_rs485 mcf_rs485_supported = { +static const struct kserial_rs485 mcf_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, }; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0aa666e247d5..013d843833a9 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1325,7 +1325,7 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up) /* Enable or disable the rs485 support */ static int serial_omap_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct uart_omap_port *up = to_uart_omap_port(port); unsigned int mode; @@ -1516,7 +1516,7 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) static int serial_omap_probe_rs485(struct uart_omap_port *up, struct device *dev) { - struct serial_rs485 *rs485conf = &up->port.rs485; + struct kserial_rs485 *rs485conf = &up->port.rs485; struct device_node *np = dev->of_node; enum gpiod_flags gflags; int ret; @@ -1559,7 +1559,7 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, return 0; } -static const struct serial_rs485 serial_omap_rs485_supported = { +static const struct kserial_rs485 serial_omap_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX, .delay_rts_before_send = 1, diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 259e08cc347c..e21f30d9fb2f 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -836,7 +836,7 @@ static void sc16is7xx_reconf_rs485(struct uart_port *port) const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT | SC16IS7XX_EFCR_RTS_INVERT_BIT; u32 efcr = 0; - struct serial_rs485 *rs485 = &port->rs485; + struct kserial_rs485 *rs485 = &port->rs485; unsigned long irqflags; spin_lock_irqsave(&port->lock, irqflags); @@ -1128,7 +1128,7 @@ static void sc16is7xx_set_termios(struct uart_port *port, } static int sc16is7xx_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); @@ -1353,7 +1353,7 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, } #endif -static const struct serial_rs485 sc16is7xx_rs485_supported = { +static const struct kserial_rs485 sc16is7xx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, .delay_rts_before_send = 1, .delay_rts_after_send = 1, /* Not supported but keep returning -EINVAL */ diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 6d57cfdeda9d..4e2ffee2cabc 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1291,7 +1291,7 @@ static int uart_get_icount(struct tty_struct *tty, SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX | \ SER_RS485_TERMINATE_BUS) -static int uart_check_rs485_flags(struct uart_port *port, struct serial_rs485 *rs485) +static int uart_check_rs485_flags(struct uart_port *port, struct kserial_rs485 *rs485) { u32 flags = rs485->flags; @@ -1320,7 +1320,7 @@ static int uart_check_rs485_flags(struct uart_port *port, struct serial_rs485 *r } static void uart_sanitize_serial_rs485_delays(struct uart_port *port, - struct serial_rs485 *rs485) + struct kserial_rs485 *rs485) { if (!port->rs485_supported.delay_rts_before_send) { if (rs485->delay_rts_before_send) { @@ -1351,7 +1351,7 @@ static void uart_sanitize_serial_rs485_delays(struct uart_port *port, } } -static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs485 *rs485) +static void uart_sanitize_serial_rs485(struct uart_port *port, struct kserial_rs485 *rs485) { u32 supported_flags = port->rs485_supported.flags; @@ -1378,7 +1378,7 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4 } static void uart_set_rs485_termination(struct uart_port *port, - const struct serial_rs485 *rs485) + const struct kserial_rs485 *rs485) { if (!(rs485->flags & SER_RS485_ENABLED)) return; @@ -1389,7 +1389,7 @@ static void uart_set_rs485_termination(struct uart_port *port, int uart_rs485_config(struct uart_port *port) { - struct serial_rs485 *rs485 = &port->rs485; + struct kserial_rs485 *rs485 = &port->rs485; int ret; uart_sanitize_serial_rs485(port, rs485); @@ -1403,23 +1403,30 @@ int uart_rs485_config(struct uart_port *port) } EXPORT_SYMBOL_GPL(uart_rs485_config); -static int user_rs485_to_kernel_serial_rs485(struct serial_rs485 *rs485, +static int user_rs485_to_kernel_serial_rs485(struct kserial_rs485 *rs485, const struct serial_rs485 __user *rs485_user) { - if (copy_from_user(rs485, rs485_user, sizeof(*rs485))) + struct serial_rs485 rs485_uapi; + + if (copy_from_user(&rs485_uapi, rs485_user, sizeof(*rs485))) return -EFAULT; + *rs485 = *((struct kserial_rs485 *)&rs485_uapi); + return 0; } static int kernel_serial_rs485_to_user_rs485(struct serial_rs485 __user *rs485_user, - struct serial_rs485 *rs485) + const struct kserial_rs485 *rs485) { + struct serial_rs485 rs485_uapi; + + *((struct kserial_rs485 *)&rs485_uapi) = *rs485; /* Return clean padding area to userspace */ - memset(rs485->padding0, 0, sizeof(rs485->padding0)); - memset(rs485->padding1, 0, sizeof(rs485->padding1)); + memset(rs485_uapi.padding0, 0, sizeof(rs485_uapi.padding0)); + memset(rs485_uapi.padding1, 0, sizeof(rs485_uapi.padding1)); - if (copy_to_user(rs485_user, rs485, sizeof(*rs485))) + if (copy_to_user(rs485_user, &rs485_uapi, sizeof(rs485_uapi))) return -EFAULT; return 0; @@ -1429,7 +1436,7 @@ static int uart_get_rs485_config(struct uart_port *port, struct serial_rs485 __user *rs485_user) { unsigned long flags; - struct serial_rs485 rs485; + struct kserial_rs485 rs485; spin_lock_irqsave(&port->lock, flags); rs485 = port->rs485; @@ -1441,7 +1448,7 @@ static int uart_get_rs485_config(struct uart_port *port, static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, struct serial_rs485 __user *rs485_user) { - struct serial_rs485 rs485; + struct kserial_rs485 rs485; int ret; unsigned long flags; @@ -3415,7 +3422,7 @@ EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq); */ int uart_get_rs485_mode(struct uart_port *port) { - struct serial_rs485 *rs485conf = &port->rs485; + struct kserial_rs485 *rs485conf = &port->rs485; struct device *dev = port->dev; u32 rs485_delay[2]; int ret; @@ -3471,6 +3478,19 @@ int uart_get_rs485_mode(struct uart_port *port) } EXPORT_SYMBOL_GPL(uart_get_rs485_mode); +/* Compile-time asserts for kserial_rs485 and serial_rs485 equality (except padding) */ +static_assert(offsetof(struct kserial_rs485, flags) == + offsetof(struct serial_rs485, flags)); +static_assert(offsetof(struct kserial_rs485, delay_rts_before_send) == + offsetof(struct serial_rs485, delay_rts_before_send)); +static_assert(offsetof(struct kserial_rs485, delay_rts_after_send) == + offsetof(struct serial_rs485, delay_rts_after_send)); +static_assert(offsetof(struct kserial_rs485, addr_recv) == + offsetof(struct serial_rs485, addr_recv)); +static_assert(offsetof(struct kserial_rs485, addr_dest) == + offsetof(struct serial_rs485, addr_dest)); +static_assert(sizeof(struct kserial_rs485) <= sizeof(struct serial_rs485)); + /* Compile-time assertions for serial_rs485 layout */ static_assert(offsetof(struct serial_rs485, padding) == (offsetof(struct serial_rs485, delay_rts_after_send) + sizeof(__u32))); diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 2c85dbf165c4..8606bda9f7fa 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -169,7 +169,7 @@ static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE, } static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *termios, - struct serial_rs485 *rs485conf) + struct kserial_rs485 *rs485conf) { struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; @@ -220,7 +220,7 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter static int stm32_usart_init_rs485(struct uart_port *port, struct platform_device *pdev) { - struct serial_rs485 *rs485conf = &port->rs485; + struct kserial_rs485 *rs485conf = &port->rs485; rs485conf->flags = 0; rs485conf->delay_rts_before_send = 0; @@ -532,7 +532,7 @@ static void stm32_usart_tc_interrupt_disable(struct uart_port *port) static void stm32_usart_rs485_rts_enable(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; + struct kserial_rs485 *rs485conf = &port->rs485; if (stm32_port->hw_flow_control || !(rs485conf->flags & SER_RS485_ENABLED)) @@ -550,7 +550,7 @@ static void stm32_usart_rs485_rts_enable(struct uart_port *port) static void stm32_usart_rs485_rts_disable(struct uart_port *port) { struct stm32_port *stm32_port = to_stm32_port(port); - struct serial_rs485 *rs485conf = &port->rs485; + struct kserial_rs485 *rs485conf = &port->rs485; if (stm32_port->hw_flow_control || !(rs485conf->flags & SER_RS485_ENABLED)) @@ -1094,7 +1094,7 @@ static void stm32_usart_set_termios(struct uart_port *port, struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; const struct stm32_usart_config *cfg = &stm32_port->info->cfg; - struct serial_rs485 *rs485conf = &port->rs485; + struct kserial_rs485 *rs485conf = &port->rs485; unsigned int baud, bits; u32 usartdiv, mantissa, fraction, oversampling; tcflag_t cflag = termios->c_cflag; @@ -1446,7 +1446,7 @@ static void stm32_usart_deinit_port(struct stm32_port *stm32port) clk_disable_unprepare(stm32port->clk); } -static const struct serial_rs485 stm32_rs485_supported = { +static const struct kserial_rs485 stm32_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX, .delay_rts_before_send = 1, diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index aef3145f2032..3fe02e74873a 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -31,6 +31,20 @@ struct serial_struct; struct device; struct gpio_desc; +/* + * Must match with serial_rs485 in include/uapi/linux/serial.h excluding the + * padding. + */ +struct kserial_rs485 { + __u32 flags; /* RS485 feature flags */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ + struct { + __u8 addr_recv; + __u8 addr_dest; + }; +}; + /** * struct uart_ops -- interface between serial_core and the driver * @@ -447,7 +461,7 @@ struct uart_port { void (*handle_break)(struct uart_port *); int (*rs485_config)(struct uart_port *, struct ktermios *termios, - struct serial_rs485 *rs485); + struct kserial_rs485 *rs485); int (*iso7816_config)(struct uart_port *, struct serial_iso7816 *iso7816); unsigned int irq; /* irq number */ @@ -567,8 +581,8 @@ struct uart_port { const char *name; /* port name */ struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ - struct serial_rs485 rs485; - struct serial_rs485 rs485_supported; /* Supported mask for serial_rs485 */ + struct kserial_rs485 rs485; + struct kserial_rs485 rs485_supported; /* Supported mask for serial_rs485 */ struct gpio_desc *rs485_term_gpio; /* enable RS485 bus termination */ struct serial_iso7816 iso7816; void *private_data; /* generic platform data pointer */ diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index cea06924b295..95583e99a798 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -112,8 +112,9 @@ struct serial_icounter_struct { * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your * platform. The set function returns the new state, with any unsupported bits * reverted appropriately. + * + * There's kernel counterpart kserial_rs485 of this struct without padding. */ - struct serial_rs485 { __u32 flags; /* RS485 feature flags */ #define SER_RS485_ENABLED (1 << 0) /* If enabled */