diff mbox series

[2/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62A

Message ID 20220829082200.241653-3-vigneshr@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: Add support for AM62A family of SoCs | expand

Commit Message

Vignesh Raghavendra Aug. 29, 2022, 8:21 a.m. UTC
Add pinctrl macros for AM62AX SoCs. These macro definitions are similar
to that of previous platforms, but adding new definitions to avoid any
naming confusions in the SoC dts files.

checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses

However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 include/dt-bindings/pinctrl/k3.h | 2 ++
 1 file changed, 2 insertions(+)

Comments

Krzysztof Kozlowski Aug. 30, 2022, 9:53 a.m. UTC | #1
On 29/08/2022 11:21, Vignesh Raghavendra wrote:
> Add pinctrl macros for AM62AX SoCs. These macro definitions are similar
> to that of previous platforms, but adding new definitions to avoid any
> naming confusions in the SoC dts files.
> 
> checkpatch insists the following error exists:
> ERROR: Macros with complex values should be enclosed in parentheses
> 
> However, we do not need parentheses enclosing the values for this
> macro as we do intend it to generate two separate values as has been
> done for other similar platforms.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> ---
>  include/dt-bindings/pinctrl/k3.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
> index a5204ab91d3e..97cd2e39efa4 100644
> --- a/include/dt-bindings/pinctrl/k3.h
> +++ b/include/dt-bindings/pinctrl/k3.h
> @@ -44,4 +44,6 @@
>  #define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
>  #define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
>  
> +#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
> +#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))

Alphabetical order, so maybe before AM642?

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
Linus Walleij Aug. 31, 2022, 1:37 p.m. UTC | #2
On Mon, Aug 29, 2022 at 10:22 AM Vignesh Raghavendra <vigneshr@ti.com> wrote:

> Add pinctrl macros for AM62AX SoCs. These macro definitions are similar
> to that of previous platforms, but adding new definitions to avoid any
> naming confusions in the SoC dts files.
>
> checkpatch insists the following error exists:
> ERROR: Macros with complex values should be enclosed in parentheses
>
> However, we do not need parentheses enclosing the values for this
> macro as we do intend it to generate two separate values as has been
> done for other similar platforms.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>
I suppose you will merge this through the ARM SoC tree.

Yours,
Linus Walleij
Vignesh Raghavendra Sept. 1, 2022, 5:32 a.m. UTC | #3
On 30/08/22 15:23, Krzysztof Kozlowski wrote:
> On 29/08/2022 11:21, Vignesh Raghavendra wrote:
>> Add pinctrl macros for AM62AX SoCs. These macro definitions are similar
>> to that of previous platforms, but adding new definitions to avoid any
>> naming confusions in the SoC dts files.
>>
>> checkpatch insists the following error exists:
>> ERROR: Macros with complex values should be enclosed in parentheses
>>
>> However, we do not need parentheses enclosing the values for this
>> macro as we do intend it to generate two separate values as has been
>> done for other similar platforms.
>>
>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
>> ---
>>  include/dt-bindings/pinctrl/k3.h | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
>> index a5204ab91d3e..97cd2e39efa4 100644
>> --- a/include/dt-bindings/pinctrl/k3.h
>> +++ b/include/dt-bindings/pinctrl/k3.h
>> @@ -44,4 +44,6 @@
>>  #define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
>>  #define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
>>  
>> +#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
>> +#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
> 
> Alphabetical order, so maybe before AM642?
> 

These macros are ordered chronologically, will add a patch to reorder
alphabetically to avoid confusion.

> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> 
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
index a5204ab91d3e..97cd2e39efa4 100644
--- a/include/dt-bindings/pinctrl/k3.h
+++ b/include/dt-bindings/pinctrl/k3.h
@@ -44,4 +44,6 @@ 
 #define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
+#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 #endif