diff mbox series

[v1,4/4] arm64: dts: imx8mm-verdin: extend pmic voltages

Message ID 20220901100151.1378709-5-marcel@ziswiler.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: verdin-imx8mm: display and pmic related additions and fixes | expand

Commit Message

Marcel Ziswiler Sept. 1, 2022, 10:01 a.m. UTC 
From: Philippe Schenker <philippe.schenker@toradex.com>

Currently, we limited the voltages from the PMIC very strictly. This
causes an issue with one Toradex SKU that uses a consumer-grade chip
that is capable of going up to 1.8GHz at 1.00V.

Extend the ranges to min/max values of the SoC operating ranges (table
10) in the datasheet. Detailed explanation as follows:

BUCK2:
  - As already described above, the SKU with the consumer-grade chip
    needs a voltage of at least 1.00V. 1.05V is chosen now as this is
    listed as the maximum. Both industrial and consumer-grade chips have
    an absolute maximum rating of 1.15V which makes it still safe to put
    1.05V
  - Lower the regulator-min value to the smallest value allowed from the
    Quad-A53, 1.2GHz version of the SoC

BUCK3:
  - This regulator is used for SoC input voltages VDD_GPU, VDD_VPU and
    VDD_DRAM.
  - Use the smallest value of these three inputs as the regulator-min
  - Use the largest value of these three inputs as the regulator-max

LDO2:
  - This LDO is used for VDD_SNVS_0P8 SoC input voltage. As this has a
    single nominal input voltage just put this in the middle of 0.8V.

Fixes: commit 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index ef105c0745eb..2eb72a607139 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -382,8 +382,8 @@  reg_vdd_arm: BUCK2 {
 				nxp,dvs-standby-voltage = <850000>;
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <950000>;
-				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
 				regulator-name = "On-module +VDD_ARM (BUCK2)";
 				regulator-ramp-delay = <3125>;
 			};
@@ -391,8 +391,8 @@  reg_vdd_arm: BUCK2 {
 			reg_vdd_dram: BUCK3 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <950000>;
-				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
 				regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
 			};
 
@@ -431,7 +431,7 @@  reg_nvcc_snvs: LDO1 {
 			reg_vdd_snvs: LDO2 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <900000>;
+				regulator-max-microvolt = <800000>;
 				regulator-min-microvolt = <800000>;
 				regulator-name = "On-module +V0.8_SNVS (LDO2)";
 			};