diff mbox series

[1/4] media: sun6i-mipi-csi2: Require both pads to be connected for streaming

Message ID 20220909133954.97010-2-paul.kocialkowski@bootlin.com (mailing list archive)
State New, archived
Headers show
Series media: sunxi: MIPI CSI-2 controllers link fixups | expand

Commit Message

Paul Kocialkowski Sept. 9, 2022, 1:39 p.m. UTC
The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.

Fixes: af54b4f4c17f ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 .../media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c  | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
index 30d6c0c5161f..340380a5f66f 100644
--- a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
+++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
@@ -519,8 +519,10 @@  static int sun6i_mipi_csi2_bridge_setup(struct sun6i_mipi_csi2_device *csi2_dev)
 
 	/* Media Pads */
 
-	pads[SUN6I_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
-	pads[SUN6I_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+	pads[SUN6I_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK |
+					       MEDIA_PAD_FL_MUST_CONNECT;
+	pads[SUN6I_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE |
+						 MEDIA_PAD_FL_MUST_CONNECT;
 
 	ret = media_entity_pads_init(&subdev->entity, SUN6I_MIPI_CSI2_PAD_COUNT,
 				     pads);