| Message ID | 20220914095053.189851-7-s-vadapalli@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for J721e CPSW9G and SGMII mode | expand |
On Wed, Sep 14, 2022 at 03:20:51PM +0530, Siddharth Vadapalli wrote: > Add support for SGMII mode in both fixed-link MAC2MAC master mode and > MAC2PHY modes for CPSW5G ports. > > Add SGMII mode to the list of extra_modes in j7200_cpswxg_pdata. > > The MAC2PHY mode has been tested in fixed-link mode using a bootstrapped > PHY. The MAC2MAC mode has been tested by a customer with J7200 SoC on > their device. > > Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> > --- > drivers/net/ethernet/ti/am65-cpsw-nuss.c | 19 ++++++++++++++++--- > 1 file changed, 16 insertions(+), 3 deletions(-) > > diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c > index 1739c389af20..3f40178436ff 100644 > --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c > +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c > @@ -75,7 +75,15 @@ > #define AM65_CPSW_PORTN_REG_TS_CTL_LTYPE2 0x31C > > #define AM65_CPSW_SGMII_CONTROL_REG 0x010 > +#define AM65_CPSW_SGMII_MR_ADV_ABILITY_REG 0x018 This doesn't seem to be used in this patch, should it be part of some other patch in the series? > #define AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE BIT(0) > +#define AM65_CPSW_SGMII_CONTROL_MASTER_MODE BIT(5) Ditto. > + > +#define MAC2MAC_MR_ADV_ABILITY_BASE (BIT(15) | BIT(0)) > +#define MAC2MAC_MR_ADV_ABILITY_FULLDUPLEX BIT(12) > +#define MAC2MAC_MR_ADV_ABILITY_1G BIT(11) > +#define MAC2MAC_MR_ADV_ABILITY_100M BIT(10) > +#define MAC2PHY_MR_ADV_ABILITY BIT(0) Most of the above don't seem to be used, and the only one that seems to be used is used in a variable declaration where the variable isn't used, and thus us also unused. > > #define AM65_CPSW_CTL_VLAN_AWARE BIT(1) > #define AM65_CPSW_CTL_P0_ENABLE BIT(2) > @@ -1493,6 +1501,7 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in > struct am65_cpsw_slave_data *slave = container_of(config, struct am65_cpsw_slave_data, > phylink_config); > struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave); > + u32 mr_adv_ability = MAC2MAC_MR_ADV_ABILITY_BASE; This doesn't seem to be used; should it be part of a different patch? I get the impression that most of this patch should be elsewhere in this series. > struct am65_cpsw_common *common = port->common; > struct fwnode_handle *fwnode; > bool fixed_link = false; > @@ -2105,8 +2114,12 @@ am65_cpsw_nuss_init_port_ndev(struct am65_cpsw_common *common, u32 port_idx) > __set_bit(PHY_INTERFACE_MODE_RMII, > port->slave.phylink_config.supported_interfaces); > } else if (common->pdata.extra_modes & BIT(port->slave.phy_if)) { > - __set_bit(PHY_INTERFACE_MODE_QSGMII, > - port->slave.phylink_config.supported_interfaces); > + if (port->slave.phy_if == PHY_INTERFACE_MODE_QSGMII) > + __set_bit(PHY_INTERFACE_MODE_QSGMII, > + port->slave.phylink_config.supported_interfaces); > + else > + __set_bit(PHY_INTERFACE_MODE_SGMII, > + port->slave.phylink_config.supported_interfaces); > } else { > dev_err(dev, "selected phy-mode is not supported\n"); > return -EOPNOTSUPP; > @@ -2744,7 +2757,7 @@ static const struct am65_cpsw_pdata j7200_cpswxg_pdata = { > .quirks = 0, > .ale_dev_id = "am64-cpswxg", > .fdqring_mode = K3_RINGACC_RING_MODE_RING, > - .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII), > + .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII), > }; > > static const struct of_device_id am65_cpsw_nuss_of_mtable[] = { > -- > 2.25.1 > >
On Wed, Sep 14, 2022 at 03:20:51PM +0530, Siddharth Vadapalli wrote: > +#define MAC2MAC_MR_ADV_ABILITY_BASE (BIT(15) | BIT(0)) > +#define MAC2MAC_MR_ADV_ABILITY_FULLDUPLEX BIT(12) > +#define MAC2MAC_MR_ADV_ABILITY_1G BIT(11) > +#define MAC2MAC_MR_ADV_ABILITY_100M BIT(10) > +#define MAC2PHY_MR_ADV_ABILITY BIT(0) In addition to my other comments, this looks like a reimplementation of the LPA_SGMII* constants found in include/uapi/linux/mii.h
Hello Russell, On 14/09/22 21:14, Russell King (Oracle) wrote: > On Wed, Sep 14, 2022 at 03:20:51PM +0530, Siddharth Vadapalli wrote: >> Add support for SGMII mode in both fixed-link MAC2MAC master mode and >> MAC2PHY modes for CPSW5G ports. >> >> Add SGMII mode to the list of extra_modes in j7200_cpswxg_pdata. >> >> The MAC2PHY mode has been tested in fixed-link mode using a bootstrapped >> PHY. The MAC2MAC mode has been tested by a customer with J7200 SoC on >> their device. >> >> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >> --- >> drivers/net/ethernet/ti/am65-cpsw-nuss.c | 19 ++++++++++++++++--- >> 1 file changed, 16 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c >> index 1739c389af20..3f40178436ff 100644 >> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c >> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c >> @@ -75,7 +75,15 @@ >> #define AM65_CPSW_PORTN_REG_TS_CTL_LTYPE2 0x31C >> >> #define AM65_CPSW_SGMII_CONTROL_REG 0x010 >> +#define AM65_CPSW_SGMII_MR_ADV_ABILITY_REG 0x018 > > This doesn't seem to be used in this patch, should it be part of some > other patch in the series? > >> #define AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE BIT(0) >> +#define AM65_CPSW_SGMII_CONTROL_MASTER_MODE BIT(5) > > Ditto. > >> + >> +#define MAC2MAC_MR_ADV_ABILITY_BASE (BIT(15) | BIT(0)) >> +#define MAC2MAC_MR_ADV_ABILITY_FULLDUPLEX BIT(12) >> +#define MAC2MAC_MR_ADV_ABILITY_1G BIT(11) >> +#define MAC2MAC_MR_ADV_ABILITY_100M BIT(10) >> +#define MAC2PHY_MR_ADV_ABILITY BIT(0) > > Most of the above don't seem to be used, and the only one that seems to > be used is used in a variable declaration where the variable isn't used, > and thus us also unused. > >> >> #define AM65_CPSW_CTL_VLAN_AWARE BIT(1) >> #define AM65_CPSW_CTL_P0_ENABLE BIT(2) >> @@ -1493,6 +1501,7 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in >> struct am65_cpsw_slave_data *slave = container_of(config, struct am65_cpsw_slave_data, >> phylink_config); >> struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave); >> + u32 mr_adv_ability = MAC2MAC_MR_ADV_ABILITY_BASE; > > This doesn't seem to be used; should it be part of a different patch? > > I get the impression that most of this patch should be elsewhere in this > series. Thank you for pointing it out. These should have been a part of the previous patch [PATCH 5/8]. Sorry for the confusion. I will fix this in the v2 series. Regards, Siddharth.
Hello Russell, On 14/09/22 21:34, Russell King (Oracle) wrote: > On Wed, Sep 14, 2022 at 03:20:51PM +0530, Siddharth Vadapalli wrote: >> +#define MAC2MAC_MR_ADV_ABILITY_BASE (BIT(15) | BIT(0)) >> +#define MAC2MAC_MR_ADV_ABILITY_FULLDUPLEX BIT(12) >> +#define MAC2MAC_MR_ADV_ABILITY_1G BIT(11) >> +#define MAC2MAC_MR_ADV_ABILITY_100M BIT(10) >> +#define MAC2PHY_MR_ADV_ABILITY BIT(0) > > In addition to my other comments, this looks like a reimplementation of > the LPA_SGMII* constants found in include/uapi/linux/mii.h I was not aware of this. Thank you for letting me know. I will use the existing constants in the v2 series. Regards, Siddharth.
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c index 1739c389af20..3f40178436ff 100644 --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c @@ -75,7 +75,15 @@ #define AM65_CPSW_PORTN_REG_TS_CTL_LTYPE2 0x31C #define AM65_CPSW_SGMII_CONTROL_REG 0x010 +#define AM65_CPSW_SGMII_MR_ADV_ABILITY_REG 0x018 #define AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE BIT(0) +#define AM65_CPSW_SGMII_CONTROL_MASTER_MODE BIT(5) + +#define MAC2MAC_MR_ADV_ABILITY_BASE (BIT(15) | BIT(0)) +#define MAC2MAC_MR_ADV_ABILITY_FULLDUPLEX BIT(12) +#define MAC2MAC_MR_ADV_ABILITY_1G BIT(11) +#define MAC2MAC_MR_ADV_ABILITY_100M BIT(10) +#define MAC2PHY_MR_ADV_ABILITY BIT(0) #define AM65_CPSW_CTL_VLAN_AWARE BIT(1) #define AM65_CPSW_CTL_P0_ENABLE BIT(2) @@ -1493,6 +1501,7 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in struct am65_cpsw_slave_data *slave = container_of(config, struct am65_cpsw_slave_data, phylink_config); struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave); + u32 mr_adv_ability = MAC2MAC_MR_ADV_ABILITY_BASE; struct am65_cpsw_common *common = port->common; struct fwnode_handle *fwnode; bool fixed_link = false; @@ -2105,8 +2114,12 @@ am65_cpsw_nuss_init_port_ndev(struct am65_cpsw_common *common, u32 port_idx) __set_bit(PHY_INTERFACE_MODE_RMII, port->slave.phylink_config.supported_interfaces); } else if (common->pdata.extra_modes & BIT(port->slave.phy_if)) { - __set_bit(PHY_INTERFACE_MODE_QSGMII, - port->slave.phylink_config.supported_interfaces); + if (port->slave.phy_if == PHY_INTERFACE_MODE_QSGMII) + __set_bit(PHY_INTERFACE_MODE_QSGMII, + port->slave.phylink_config.supported_interfaces); + else + __set_bit(PHY_INTERFACE_MODE_SGMII, + port->slave.phylink_config.supported_interfaces); } else { dev_err(dev, "selected phy-mode is not supported\n"); return -EOPNOTSUPP; @@ -2744,7 +2757,7 @@ static const struct am65_cpsw_pdata j7200_cpswxg_pdata = { .quirks = 0, .ale_dev_id = "am64-cpswxg", .fdqring_mode = K3_RINGACC_RING_MODE_RING, - .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII), + .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII), }; static const struct of_device_id am65_cpsw_nuss_of_mtable[] = {
Add support for SGMII mode in both fixed-link MAC2MAC master mode and MAC2PHY modes for CPSW5G ports. Add SGMII mode to the list of extra_modes in j7200_cpswxg_pdata. The MAC2PHY mode has been tested in fixed-link mode using a bootstrapped PHY. The MAC2MAC mode has been tested by a customer with J7200 SoC on their device. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- drivers/net/ethernet/ti/am65-cpsw-nuss.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)