diff mbox series

[v3,2/4] arm64: dts: mt8195: Add edptx and dptx nodes

Message ID 20220916025059.16673-3-rex-bc.chen@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add dp-intf and dp nodes | expand

Commit Message

Rex-BC Chen (陳柏辰) Sept. 16, 2022, 2:50 a.m. UTC 
In MT8195, we use edptx as the internal display interface and use
dptx as the external display interface. Therefore, we need to add
these nodes to support the internal display and the external display.

- Add dp calibration data in the efuse node.
- Add edptx and dptx nodes for MT8195.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 25 ++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 82d28e9f60c3..83567d90ede6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1241,6 +1241,9 @@ 
 				reg = <0x189 0x2>;
 				bits = <7 5>;
 			};
+			dp_calibration: dp-data@1ac {
+				reg = <0x1ac 0x10>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -2178,5 +2181,27 @@ 
 			clock-names = "engine", "pixel", "pll";
 			status = "disabled";
 		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8195-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8195-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
 	};
 };