diff mbox series

[v3,3/3] arm64: dts: freescale: Add InnoComm i.MX8MM based WB15 SoM and EVK

Message ID 20220919082434.1184673-4-s.hauer@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series arm64: dts: Add InnoComm WB15-EVK support | expand

Commit Message

Sascha Hauer Sept. 19, 2022, 8:24 a.m. UTC 
Add the InnoComm i.MX8MM based WB15 SoM and its EVK. The WB15 is a
half credit card sized board featuring:

- i.MX8MM CPU
- LPDDR4, 1GiB
- eMMC, 8GiB
- 1Gb Ethernet RGMII interface
- WiFi 802.11 a/b/g/n/ac, Bluetooth 4.2

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

Notes:
    Changes since v3:
    - no underscores in node names
    - use IRQ_TYPE_LEVEL_LOW for specifying GPIO interrupt polarity
    
    Changes since v2:
    - Fix remaining s/innocom/innocomm/
    
    Changes since v1:
    - Fix spelling of InnoComm

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../freescale/imx8mm-innocomm-wb15-evk.dts    | 147 ++++++
 .../dts/freescale/imx8mm-innocomm-wb15.dtsi   | 480 ++++++++++++++++++
 3 files changed, 628 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi

Comments

Krzysztof Kozlowski Sept. 19, 2022, 10:53 a.m. UTC | #1 
On 19/09/2022 10:24, Sascha Hauer wrote:
> Add the InnoComm i.MX8MM based WB15 SoM and its EVK. The WB15 is a
> half credit card sized board featuring:
> 
> - i.MX8MM CPU
> - LPDDR4, 1GiB
> - eMMC, 8GiB
> - 1Gb Ethernet RGMII interface
> - WiFi 802.11 a/b/g/n/ac, Bluetooth 4.2

(...)

> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
> @@ -0,0 +1,147 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2018 Bang & Olufsen
> + * Copyright 2022 Pengutronix
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-innocomm-wb15.dtsi"
> +
> +/ {
> +	model = "InnoComm WB15-EVK";
> +	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_leds>;
> +		status = "okay";

okay is by default

> +
> +		led-0 {
> +			label = "debug";
> +			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +	};
> +



Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 8bf7f7ecebaa1..387746c8d8dc2 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -55,6 +55,7 @@  dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
new file mode 100644
index 0000000000000..08c29326aefaa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
@@ -0,0 +1,147 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ * Copyright 2022 Pengutronix
+ */
+
+/dts-v1/;
+
+#include "imx8mm-innocomm-wb15.dtsi"
+
+/ {
+	model = "InnoComm WB15-EVK";
+	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		led-0 {
+			label = "debug";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ethphy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fec_phy_reg>;
+		regulator-name = "PHY_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			phy-supply = <&reg_ethphy>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec_phy: fec-phy-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec_phy_reg: fec-phy-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x16
+		>;
+	};
+
+	pinctrl_gpio_leds: led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0xd6
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
new file mode 100644
index 0000000000000..59be159315942
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
@@ -0,0 +1,480 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	reg_modem: regulator-modem {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_regulator>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "epdev_on";
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_out: regulator-3v3-out {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_OUT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <850000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <850000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// buck5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// buck6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// buck7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// buck8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	fsl,max-link-speed = <1>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4349-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_bt>;
+		device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_out>;
+		vddio-supply = <&reg_3v3_out>;
+		clocks = <&osc_32k>;
+		max-speed = <3000000>;
+		clock-names = "extclk";
+	};
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x6
+		>;
+	};
+
+	pinctrl_modem_bt: modem-bt-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_modem_regulator: modem-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x41
+		>;
+	};
+
+	pinctrl_pmic: pmic-irq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};