| Message ID | 20220922081347.3860008-4-s.hauer@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: Add InnoComm WB15-EVK support | expand |
On 22/09/2022 10:13, Sascha Hauer wrote: > Add the InnoComm i.MX8MM based WB15 SoM and its EVK. The WB15 is a > half credit card sized board featuring: > > - i.MX8MM CPU > - LPDDR4, 1GiB > - eMMC, 8GiB > - 1Gb Ethernet RGMII interface > - WiFi 802.11 a/b/g/n/ac, Bluetooth 4.2 > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Thu, Sep 22, 2022 at 10:13:47AM +0200, Sascha Hauer wrote: > Add the InnoComm i.MX8MM based WB15 SoM and its EVK. The WB15 is a > half credit card sized board featuring: > > - i.MX8MM CPU > - LPDDR4, 1GiB > - eMMC, 8GiB > - 1Gb Ethernet RGMII interface > - WiFi 802.11 a/b/g/n/ac, Bluetooth 4.2 > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > --- > > Notes: > Changes since v3: > - Remove unnecessary status = "okay" from new node > > Changes since v2: > - Fix remaining s/innocom/innocomm/ > - no underscores in node names > - use IRQ_TYPE_LEVEL_LOW for specifying GPIO interrupt polarity > > Changes since v1: > - Fix spelling of InnoComm > > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../freescale/imx8mm-innocomm-wb15-evk.dts | 146 ++++++ > .../dts/freescale/imx8mm-innocomm-wb15.dtsi | 480 ++++++++++++++++++ > 3 files changed, 627 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 8bf7f7ecebaa1..387746c8d8dc2 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts > new file mode 100644 > index 0000000000000..055faae79930c > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts > @@ -0,0 +1,146 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2018 Bang & Olufsen > + * Copyright 2022 Pengutronix > + */ > + > +/dts-v1/; > + > +#include "imx8mm-innocomm-wb15.dtsi" > + > +/ { > + model = "InnoComm WB15-EVK"; > + compatible = "innocomm,wb15-evk", "fsl,imx8mm"; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + led-0 { > + label = "debug"; > + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + }; > + > + reg_vsd_3v3: regulator-vsd-3v3 { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_vsd_3v3>; > + regulator-name = "VSD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_ethphy: regulator-eth-phy { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec_phy_reg>; > + regulator-name = "PHY_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec>; > + phy-mode = "rgmii-id"; > + phy-handle = <ðphy0>; > + fsl,magic-packet; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy0: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec_phy>; > + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; > + phy-supply = <®_ethphy>; > + }; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usbotg1 { > + dr_mode = "otg"; > + samsung,picophy-pre-emp-curr-control = <3>; > + samsung,picophy-dc-vol-level-adjust = <7>; > + disable-over-current; > + status = "okay"; > +}; > + > +&usbotg2 { > + dr_mode = "host"; > + samsung,picophy-pre-emp-curr-control = <3>; > + samsung,picophy-dc-vol-level-adjust = <7>; > + disable-over-current; > + status = "okay"; > +}; > + > +&usdhc2 { > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + vmmc-supply = <®_vsd_3v3>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_fec: fec-grp { > + fsl,pins = < > + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03 > + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03 > + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f > + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f > + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f > + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f > + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 > + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 > + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 > + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 > + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f > + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 > + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 > + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f > + >; > + }; > + > + pinctrl_fec_phy: fec-phy-grp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 > + >; > + }; > + > + pinctrl_fec_phy_reg: fec-phy-reg-grp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x16 > + >; > + }; > + > + pinctrl_gpio_leds: led-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0xd6 > + >; > + }; > + > + pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 > + >; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi > new file mode 100644 > index 0000000000000..59be159315942 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi > @@ -0,0 +1,480 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2018 Bang & Olufsen > + */ > + > +#include "imx8mm.dtsi" > +#include <dt-bindings/phy/phy-imx8-pcie.h> > + > +/ { > + reg_modem: regulator-modem { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_modem_regulator>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "epdev_on"; > + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-always-on; > + }; > + > + reg_3v3_out: regulator-3v3-out { > + compatible = "regulator-fixed"; > + regulator-name = "3V3_OUT"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > +}; > + > +&cpu_alert0 { > + temperature = <95000>; > +}; > + > +&cpu_crit0 { > + temperature = <105000>; > +}; > + > +&ddrc { > + operating-points-v2 = <&ddrc_opp_table>; > + > + ddrc_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-25000000 { > + opp-hz = /bits/ 64 <25000000>; > + }; > + > + opp-100000000 { > + opp-hz = /bits/ 64 <100000000>; > + }; > + > + opp-600000000 { > + opp-hz = /bits/ 64 <600000000>; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + status = "okay"; > + > + pmic@4b { > + compatible = "rohm,bd71847"; > + reg = <0x4b>; > + pinctrl-0 = <&pinctrl_pmic>; > + interrupt-parent = <&gpio1>; > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; > + rohm,reset-snvs-powered; > + > + regulators { > + buck1_reg: BUCK1 { > + regulator-name = "buck1"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <1250>; > + rohm,dvs-run-voltage = <850000>; > + rohm,dvs-idle-voltage = <850000>; > + rohm,dvs-suspend-voltage = <850000>; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "buck2"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1300000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <1250>; > + rohm,dvs-run-voltage = <1000000>; > + rohm,dvs-idle-voltage = <900000>; > + }; > + > + buck3_reg: BUCK3 { > + // buck5 in datasheet > + regulator-name = "buck3"; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1350000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck4_reg: BUCK4 { > + // buck6 in datasheet > + regulator-name = "buck4"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck5_reg: BUCK5 { > + // buck7 in datasheet > + regulator-name = "buck5"; > + regulator-min-microvolt = <1605000>; > + regulator-max-microvolt = <1995000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck6_reg: BUCK6 { > + // buck8 in datasheet > + regulator-name = "buck6"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1_reg: LDO1 { > + regulator-name = "ldo1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "ldo2"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <900000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "ldo3"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "ldo4"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "ldo5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "ldo6"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c2>; > + pinctrl-1 = <&pinctrl_i2c2_gpio>; > + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + status = "okay"; > +}; > + > +&i2c3 { > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c3>; > + pinctrl-1 = <&pinctrl_i2c3_gpio>; > + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > +}; > + > +&pcie_phy { > + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; > + fsl,tx-deemph-gen1 = <0x2d>; > + fsl,tx-deemph-gen2 = <0xf>; > + status = "okay"; > +}; > + > +&pcie0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie0>; > + reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>; > + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>, > + <&clk IMX8MM_CLK_PCIE1_AUX>; > + clock-names = "pcie", "pcie_bus", "pcie_aux"; > + fsl,max-link-speed = <1>; > + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; > + assigned-clock-rates = <10000000>, <250000000>; > + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; > + status = "okay"; > +}; > + > +&uart1 { /* BT */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + assigned-clocks = <&clk IMX8MM_CLK_UART1>; > + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; > + fsl,uart-has-rtscts; 'fsl,uart-has-rtscts' is deprecated, should use 'uart-has-rtscts'. Fixed it and applied the series. Shawn > + status = "okay"; > + > + bluetooth { > + compatible = "brcm,bcm4349-bt"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_modem_bt>; > + device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; > + shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; > + vbat-supply = <®_3v3_out>; > + vddio-supply = <®_3v3_out>; > + clocks = <&osc_32k>; > + max-speed = <3000000>; > + clock-names = "extclk"; > + }; > +}; > + > +&uart2 { /* console */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > +}; > + > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + bus-width = <8>; > + no-sd; > + no-sdio; > + non-removable; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > + bus-width = <4>; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&A53_0 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&A53_1 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&A53_2 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&A53_3 { > + cpu-supply = <&buck2_reg>; > +}; > + > +/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */ > + > +&iomuxc { > + pinctrl_i2c1: i2c1-grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c1_gpio: i2c1-gpio-grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3 > + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3 > + >; > + }; > + > + pinctrl_i2c2: i2c2-grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c2_gpio: i2c2-gpio-grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3 > + MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3 > + >; > + }; > + > + pinctrl_i2c3: i2c3-grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c3_gpio: i2c3-gpio-grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3 > + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3 > + >; > + }; > + > + pinctrl_pcie0: pcie0-grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61 > + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x6 > + >; > + }; > + > + pinctrl_modem_bt: modem-bt-grp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 > + MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x19 > + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 > + MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 > + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 > + >; > + }; > + > + pinctrl_modem_regulator: modem-reg-grp { > + fsl,pins = < > + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41 > + >; > + }; > + > + pinctrl_pmic: pmic-irq-grp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 > + >; > + }; > + > + pinctrl_uart1: uart1-grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 > + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 > + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 > + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 > + >; > + }; > + > + pinctrl_uart2: uart2-grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 > + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000190 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 > + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 > + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 > + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 > + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 > + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 > + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d0 > + >; > + }; > + > + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000194 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 > + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 > + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 > + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 > + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 > + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 > + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d4 > + >; > + }; > + > + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000196 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 > + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 > + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 > + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 > + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 > + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 > + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d6 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2-gpio-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x1d0 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 > + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 > + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 > + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 > + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 > + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 > + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 > + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 > + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 > + >; > + }; > + > + pinctrl_wdog: wdog-grp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; > -- > 2.30.2 >
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 8bf7f7ecebaa1..387746c8d8dc2 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts new file mode 100644 index 0000000000000..055faae79930c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Bang & Olufsen + * Copyright 2022 Pengutronix + */ + +/dts-v1/; + +#include "imx8mm-innocomm-wb15.dtsi" + +/ { + model = "InnoComm WB15-EVK"; + compatible = "innocomm,wb15-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + label = "debug"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_vsd_3v3: regulator-vsd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vsd_3v3>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_ethphy: regulator-eth-phy { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy_reg>; + regulator-name = "PHY_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-supply = <®_ethphy>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_vsd_3v3>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fec-grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x03 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x03 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + >; + }; + + pinctrl_fec_phy: fec-phy-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_fec_phy_reg: fec-phy-reg-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x16 + >; + }; + + pinctrl_gpio_leds: led-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0xd6 + >; + }; + + pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi new file mode 100644 index 0000000000000..59be159315942 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi @@ -0,0 +1,480 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Bang & Olufsen + */ + +#include "imx8mm.dtsi" +#include <dt-bindings/phy/phy-imx8-pcie.h> + +/ { + reg_modem: regulator-modem { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_modem_regulator>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "epdev_on"; + gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_3v3_out: regulator-3v3-out { + compatible = "regulator-fixed"; + regulator-name = "3V3_OUT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <850000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <850000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // buck5 in datasheet + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // buck6 in datasheet + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // buck7 in datasheet + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // buck8 in datasheet + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + fsl,max-link-speed = <1>; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&uart1 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + fsl,uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4349-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_modem_bt>; + device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + vbat-supply = <®_3v3_out>; + vddio-supply = <®_3v3_out>; + clocks = <&osc_32k>; + max-speed = <3000000>; + clock-names = "extclk"; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */ + +&iomuxc { + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3 + >; + }; + + pinctrl_pcie0: pcie0-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61 + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x6 + >; + }; + + pinctrl_modem_bt: modem-bt-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 + MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x19 + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 + MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 + >; + }; + + pinctrl_modem_regulator: modem-reg-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41 + >; + }; + + pinctrl_pmic: pmic-irq-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_wdog: wdog-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +};
Add the InnoComm i.MX8MM based WB15 SoM and its EVK. The WB15 is a half credit card sized board featuring: - i.MX8MM CPU - LPDDR4, 1GiB - eMMC, 8GiB - 1Gb Ethernet RGMII interface - WiFi 802.11 a/b/g/n/ac, Bluetooth 4.2 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- Notes: Changes since v3: - Remove unnecessary status = "okay" from new node Changes since v2: - Fix remaining s/innocom/innocomm/ - no underscores in node names - use IRQ_TYPE_LEVEL_LOW for specifying GPIO interrupt polarity Changes since v1: - Fix spelling of InnoComm arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx8mm-innocomm-wb15-evk.dts | 146 ++++++ .../dts/freescale/imx8mm-innocomm-wb15.dtsi | 480 ++++++++++++++++++ 3 files changed, 627 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi