diff mbox series

[v2,01/10] PCI: pciehp: Enable Command Completed Interrupt only if supported

Message ID 20220927141926.8895-2-kabel@kernel.org (mailing list archive)
State New, archived
Headers show
Series PCI: aardvark controller changes BATCH 6 | expand

Commit Message

Marek Behún Sept. 27, 2022, 2:19 p.m. UTC
From: Pali Rohár <pali@kernel.org>

The No Command Completed Support bit in the Slot Capabilities register
indicates whether Command Completed Interrupt Enable is unsupported.

We already check whether No Command Completed Support bit is set in
pcie_wait_cmd(), and do not wait in this case.

Let's not enable this Command Completed Interrupt at all if NCCS is set,
so that when users dump configuration space from userspace, the dump
does not confuse them by saying that Command Completed Interrupt is not
supported, but it is enabled.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
---
 drivers/pci/hotplug/pciehp_hpc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Bjorn Helgaas Dec. 7, 2022, 2:29 p.m. UTC | #1
On Tue, Sep 27, 2022 at 04:19:17PM +0200, Marek Behún wrote:
> From: Pali Rohár <pali@kernel.org>
> 
> The No Command Completed Support bit in the Slot Capabilities register
> indicates whether Command Completed Interrupt Enable is unsupported.
> 
> We already check whether No Command Completed Support bit is set in
> pcie_wait_cmd(), and do not wait in this case.
> 
> Let's not enable this Command Completed Interrupt at all if NCCS is set,
> so that when users dump configuration space from userspace, the dump
> does not confuse them by saying that Command Completed Interrupt is not
> supported, but it is enabled.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> Signed-off-by: Marek Behún <kabel@kernel.org>
> Reviewed-by: Lukas Wunner <lukas@wunner.de>

Since this isn't directly related to aardvark or the rest of the
series, I applied this to pci/hotplug for v6.2, thanks!

> ---
>  drivers/pci/hotplug/pciehp_hpc.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index 040ae076ec0e..10e9670eea0b 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -811,7 +811,9 @@ static void pcie_enable_notification(struct controller *ctrl)
>  	else
>  		cmd |= PCI_EXP_SLTCTL_PDCE;
>  	if (!pciehp_poll_mode)
> -		cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
> +		cmd |= PCI_EXP_SLTCTL_HPIE;
> +	if (!pciehp_poll_mode && !NO_CMD_CMPL(ctrl))
> +		cmd |= PCI_EXP_SLTCTL_CCIE;
>  
>  	mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
>  		PCI_EXP_SLTCTL_PFDE |
> -- 
> 2.35.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 040ae076ec0e..10e9670eea0b 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -811,7 +811,9 @@  static void pcie_enable_notification(struct controller *ctrl)
 	else
 		cmd |= PCI_EXP_SLTCTL_PDCE;
 	if (!pciehp_poll_mode)
-		cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
+		cmd |= PCI_EXP_SLTCTL_HPIE;
+	if (!pciehp_poll_mode && !NO_CMD_CMPL(ctrl))
+		cmd |= PCI_EXP_SLTCTL_CCIE;
 
 	mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
 		PCI_EXP_SLTCTL_PFDE |