diff mbox series

[v7,02/10] drm: bridge: samsung-dsim: Lookup OF-graph or Child node devices

Message ID 20221005151309.7278-3-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series drm: bridge: Add Samsung MIPI DSIM bridge | expand

Commit Message

Jagan Teki Oct. 5, 2022, 3:13 p.m. UTC
The child devices in MIPI DSI can be binding with OF-graph
and also via child nodes.

The OF-graph interface represents the child devices via
remote and associated endpoint numbers like

dsi {
   compatible = "fsl,imx8mm-mipi-dsim";

   ports {
	port@0 {
	     reg = <0>;

	     dsi_in_lcdif: endpoint@0 {
		  reg = <0>;
		  remote-endpoint = <&lcdif_out_dsi>;
	     };
	};

	port@1 {
	     reg = <1>;

	     dsi_out_bridge: endpoint {
		  remote-endpoint = <&bridge_in_dsi>;
	     };
	};
};

The child node interface represents the child devices via
conventional child nodes on given DSI parent like

dsi {
   compatible = "samsung,exynos5433-mipi-dsi";

   ports {
        port@0 {
             reg = <0>;

             dsi_to_mic: endpoint {
                  remote-endpoint = <&mic_to_dsi>;
             };
        };
   };

   panel@0 {
        reg = <0>;
   };
};

As Samsung DSIM bridge is common DSI IP across all Exynos DSI
and NXP i.MX8M host controllers, this patch adds support to
lookup the child devices whether its bindings on the associated
host represent OF-graph or child node interfaces.

v7, v6, v5, v4, v3:
* none

v2:
* new patch

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/gpu/drm/bridge/samsung-dsim.c | 38 +++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

Comments

Marek Vasut Oct. 15, 2022, 9:48 p.m. UTC | #1
On 10/5/22 17:13, Jagan Teki wrote:
> The child devices in MIPI DSI can be binding with OF-graph
> and also via child nodes.
> 
> The OF-graph interface represents the child devices via
> remote and associated endpoint numbers like
> 
> dsi {
>     compatible = "fsl,imx8mm-mipi-dsim";
> 
>     ports {
> 	port@0 {
> 	     reg = <0>;
> 
> 	     dsi_in_lcdif: endpoint@0 {
> 		  reg = <0>;
> 		  remote-endpoint = <&lcdif_out_dsi>;
> 	     };
> 	};
> 
> 	port@1 {
> 	     reg = <1>;
> 
> 	     dsi_out_bridge: endpoint {
> 		  remote-endpoint = <&bridge_in_dsi>;
> 	     };
> 	};
> };
> 
> The child node interface represents the child devices via
> conventional child nodes on given DSI parent like
> 
> dsi {
>     compatible = "samsung,exynos5433-mipi-dsi";
> 
>     ports {
>          port@0 {
>               reg = <0>;
> 
>               dsi_to_mic: endpoint {
>                    remote-endpoint = <&mic_to_dsi>;
>               };
>          };
>     };
> 
>     panel@0 {
>          reg = <0>;
>     };
> };
> 
> As Samsung DSIM bridge is common DSI IP across all Exynos DSI
> and NXP i.MX8M host controllers, this patch adds support to
> lookup the child devices whether its bindings on the associated
> host represent OF-graph or child node interfaces.

This looks like a good candidate for common/helper code which can be 
reused by other similar drivers.
Jagan Teki Oct. 17, 2022, 2:52 a.m. UTC | #2
On Sun, Oct 16, 2022 at 3:18 AM Marek Vasut <marex@denx.de> wrote:
>
> On 10/5/22 17:13, Jagan Teki wrote:
> > The child devices in MIPI DSI can be binding with OF-graph
> > and also via child nodes.
> >
> > The OF-graph interface represents the child devices via
> > remote and associated endpoint numbers like
> >
> > dsi {
> >     compatible = "fsl,imx8mm-mipi-dsim";
> >
> >     ports {
> >       port@0 {
> >            reg = <0>;
> >
> >            dsi_in_lcdif: endpoint@0 {
> >                 reg = <0>;
> >                 remote-endpoint = <&lcdif_out_dsi>;
> >            };
> >       };
> >
> >       port@1 {
> >            reg = <1>;
> >
> >            dsi_out_bridge: endpoint {
> >                 remote-endpoint = <&bridge_in_dsi>;
> >            };
> >       };
> > };
> >
> > The child node interface represents the child devices via
> > conventional child nodes on given DSI parent like
> >
> > dsi {
> >     compatible = "samsung,exynos5433-mipi-dsi";
> >
> >     ports {
> >          port@0 {
> >               reg = <0>;
> >
> >               dsi_to_mic: endpoint {
> >                    remote-endpoint = <&mic_to_dsi>;
> >               };
> >          };
> >     };
> >
> >     panel@0 {
> >          reg = <0>;
> >     };
> > };
> >
> > As Samsung DSIM bridge is common DSI IP across all Exynos DSI
> > and NXP i.MX8M host controllers, this patch adds support to
> > lookup the child devices whether its bindings on the associated
> > host represent OF-graph or child node interfaces.
>
> This looks like a good candidate for common/helper code which can be
> reused by other similar drivers.

Tried that but unfortunately, it cannot hold to handle things in a generic way.
80253168dbfd ("drm: of: Lookup if child node has panel or bridge")

Jagan.
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 07563d00a420..c34c6abac815 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1356,18 +1356,52 @@  static int samsung_dsim_host_attach(struct mipi_dsi_host *host,
 	struct samsung_dsim *dsi = host_to_dsi(host);
 	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
 	struct device *dev = dsi->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *remote;
 	struct drm_panel *panel;
 	int ret;
 
-	panel = of_drm_find_panel(device->dev.of_node);
+	/**
+	 * Devices can also be child nodes when we also control that device
+	 * through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
+	 *
+	 * Lookup for a child node of the given parent that isn't either port
+	 * or ports.
+	 */
+	for_each_available_child_of_node(np, remote) {
+		if (of_node_name_eq(remote, "port") ||
+		    of_node_name_eq(remote, "ports"))
+			continue;
+
+		goto of_find_panel_or_bridge;
+	}
+
+	/*
+	 * of_graph_get_remote_node() produces a noisy error message if port
+	 * node isn't found and the absence of the port is a legit case here,
+	 * so at first we silently check whether graph presents in the
+	 * device-tree node.
+	 */
+	if (!of_graph_is_present(np))
+		return -ENODEV;
+
+	remote = of_graph_get_remote_node(np, 1, 0);
+
+of_find_panel_or_bridge:
+	if (!remote)
+		return -ENODEV;
+
+	panel = of_drm_find_panel(remote);
 	if (!IS_ERR(panel)) {
 		dsi->out_bridge = devm_drm_panel_bridge_add(dev, panel);
 	} else {
-		dsi->out_bridge = of_drm_find_bridge(device->dev.of_node);
+		dsi->out_bridge = of_drm_find_bridge(remote);
 		if (!dsi->out_bridge)
 			dsi->out_bridge = ERR_PTR(-EINVAL);
 	}
 
+	of_node_put(remote);
+
 	if (IS_ERR(dsi->out_bridge)) {
 		ret = PTR_ERR(dsi->out_bridge);
 		DRM_DEV_ERROR(dev, "failed to find the bridge: %d\n", ret);