| Message ID | 20221011212501.2661003-4-tanmay.shah@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Xilinx RPU subsystem support | expand |
On 10/11/22 23:24, Tanmay Shah wrote: > From: Ben Levinsky <ben.levinsky@amd.com> > > Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for > later use via request_node and release_node > > Signed-off-by: Ben Levinsky <ben.levinsky@amd.com> > Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> > --- > > Changes in v10: > - None > > Changes in v9: > - None > > Changes in v8: > - None > > Changes in v7: > - None > > Changes in v6: > - None > > Changes in v5: > - None > > Changes in v4: > - None > > Changes in v3: > - None > > include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h > index 9f50dacbf7d6..e00a25aa2c17 100644 > --- a/include/linux/firmware/xlnx-zynqmp.h > +++ b/include/linux/firmware/xlnx-zynqmp.h > @@ -135,6 +135,10 @@ enum pm_ret_status { > }; > > enum pm_ioctl_id { > + IOCTL_GET_RPU_OPER_MODE = 0, > + IOCTL_SET_RPU_OPER_MODE = 1, > + IOCTL_RPU_BOOT_ADDR_CONFIG = 2, > + IOCTL_TCM_COMB_CONFIG = 3, > IOCTL_SD_DLL_RESET = 6, > IOCTL_SET_SD_TAPDELAY = 7, > IOCTL_SET_PLL_FRAC_MODE = 8, > @@ -172,6 +176,21 @@ enum pm_query_id { > PM_QID_CLOCK_GET_MAX_DIVISOR = 13, > }; > > +enum rpu_oper_mode { > + PM_RPU_MODE_LOCKSTEP = 0, > + PM_RPU_MODE_SPLIT = 1, > +}; > + > +enum rpu_boot_mem { > + PM_RPU_BOOTMEM_LOVEC = 0, > + PM_RPU_BOOTMEM_HIVEC = 1, > +}; > + > +enum rpu_tcm_comb { > + PM_RPU_TCM_SPLIT = 0, > + PM_RPU_TCM_COMB = 1, > +}; > + > enum zynqmp_pm_reset_action { > PM_RESET_ACTION_RELEASE = 0, > PM_RESET_ACTION_ASSERT = 1, Acked-by: Michal Simek <michal.simek@amd.com> M
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 9f50dacbf7d6..e00a25aa2c17 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -135,6 +135,10 @@ enum pm_ret_status { }; enum pm_ioctl_id { + IOCTL_GET_RPU_OPER_MODE = 0, + IOCTL_SET_RPU_OPER_MODE = 1, + IOCTL_RPU_BOOT_ADDR_CONFIG = 2, + IOCTL_TCM_COMB_CONFIG = 3, IOCTL_SD_DLL_RESET = 6, IOCTL_SET_SD_TAPDELAY = 7, IOCTL_SET_PLL_FRAC_MODE = 8, @@ -172,6 +176,21 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR = 13, }; +enum rpu_oper_mode { + PM_RPU_MODE_LOCKSTEP = 0, + PM_RPU_MODE_SPLIT = 1, +}; + +enum rpu_boot_mem { + PM_RPU_BOOTMEM_LOVEC = 0, + PM_RPU_BOOTMEM_HIVEC = 1, +}; + +enum rpu_tcm_comb { + PM_RPU_TCM_SPLIT = 0, + PM_RPU_TCM_COMB = 1, +}; + enum zynqmp_pm_reset_action { PM_RESET_ACTION_RELEASE = 0, PM_RESET_ACTION_ASSERT = 1,