Message ID | 20221017083203.3690346-5-yeyunfeng@huawei.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Support ASID Isolation mechanism | expand |
On Mon, Oct 17, 2022 at 04:32:02PM +0800, Yunfeng Ye wrote: > After a rollover, the global generation will be flushed, which will > cause the process mm->context.id on all CPUs do not match the > generation. Thus, the process will compete for the global spinlock lock > to reallocate a new ASID and refresh the TLBs of all CPUs on context > switch. This will lead to the increase of scheduling delay and TLB miss. > > In some delay-sensitive scenarios, for example, part of CPUs are > isolated, only a limited number of processes are deployed to run on the > isolated CPUs. In this case, we do not want these key processes to be > affected by the rollover of ASID. Part of this commit log should also go in the cover letter and it would help to back this up by some numbers, e.g. what percentage improvement you get with this patchset by running hackbench on an isolated CPU. In theory it looks like CPU isolation would benefit from this patchset but we try not to touch this code often, so any modification should come with proper justification, backed by numbers. Note that I haven't reviewed the algorithm you are proposing in detail, only had a brief look.
On 2022/11/9 20:43, Catalin Marinas wrote: > On Mon, Oct 17, 2022 at 04:32:02PM +0800, Yunfeng Ye wrote: >> After a rollover, the global generation will be flushed, which will >> cause the process mm->context.id on all CPUs do not match the >> generation. Thus, the process will compete for the global spinlock lock >> to reallocate a new ASID and refresh the TLBs of all CPUs on context >> switch. This will lead to the increase of scheduling delay and TLB miss. >> >> In some delay-sensitive scenarios, for example, part of CPUs are >> isolated, only a limited number of processes are deployed to run on the >> isolated CPUs. In this case, we do not want these key processes to be >> affected by the rollover of ASID. > > Part of this commit log should also go in the cover letter and it would> help to back this up by some numbers, e.g. what percentage improvement > you get with this patchset by running hackbench on an isolated CPU. > > In theory it looks like CPU isolation would benefit from this patchset > but we try not to touch this code often, so any modification should come > with proper justification, backed by numbers. > Yes, CPU isolation will benefit from this patchset. We use cyclictest tool to test the maximum scheduling and interrupt delays, found that the sched_switch process takes several microseconds sometimes, The analysis result shows that the delay is caused by the ASID refresh. We use simple test cases to construct the case of quickly consumption of ASIDs, this increases the ASID refresh frequency and the contention for the global ASID spin lock. In this case, the delay between sched_switch and tlb_flush can reach 63 us. The following is the trace log: stress-ng-2864907 [012] dN.. 17006.430048: sched_stat_runtime: comm=stress-ng pid=2864907 runtime=859130 [ns] vruntime=9015202524211 [ns] stress-ng-2864907 [012] d... 17006.430048: sched_switch: prev_comm=stress-ng prev_pid=2864907 prev_prio=120 prev_state=R ==> next_comm=cyclictest next_pid=2866344 next_prio=19 stress-ng-2864907 [012] d... 17006.430111: tlb_flush: pages:-1 reason:flush on task switch (0) // 17006.430111 - 17006.430048 = 63 us cyclictest-2866344 [012] .... 17006.430112: kfree: call_site=__audit_syscall_exit+0x210/0x250 ptr=0000000000000000 cyclictest-2866344 [012] .... 17006.430112: sys_exit: NR 115 = 0 cyclictest-2866344 [012] .... 17006.430112: sys_clock_nanosleep -> 0x0 cyclictest-2866344 [012] d... 17006.430113: user_enter: cyclictest-2866344 [012] d... 17006.430126: user_exit: cyclictest-2866344 [012] .... 17006.430126: sys_enter: NR 64 (4, ffffa451c4d0, 1f, 0, 3b, 0) cyclictest-2866344 [012] .... 17006.430126: sys_write(fd: 4, buf: ffffa451c4d0, count: 1f) cyclictest-2866344 [012] .... 17006.430129: tracing_mark_write: hit latency threshold (72 > 30) The delay caused by ASID interference is variable, may be several nanoseconds, or may be several microseconds, it depends on the concurrent competition. If this patch series is used, the delay caused by ASID interference on the isolated CPU can be reduced. Thanks. > Note that I haven't reviewed the algorithm you are proposing in detail, > only had a brief look. >
On Thu, Nov 10, 2022 at 03:07:53PM +0800, Yunfeng Ye wrote: > On 2022/11/9 20:43, Catalin Marinas wrote: > > On Mon, Oct 17, 2022 at 04:32:02PM +0800, Yunfeng Ye wrote: > >> After a rollover, the global generation will be flushed, which will > >> cause the process mm->context.id on all CPUs do not match the > >> generation. Thus, the process will compete for the global spinlock lock > >> to reallocate a new ASID and refresh the TLBs of all CPUs on context > >> switch. This will lead to the increase of scheduling delay and TLB miss. > >> > >> In some delay-sensitive scenarios, for example, part of CPUs are > >> isolated, only a limited number of processes are deployed to run on the > >> isolated CPUs. In this case, we do not want these key processes to be > >> affected by the rollover of ASID. > > > > Part of this commit log should also go in the cover letter and it would> help to back this up by some numbers, e.g. what percentage improvement > > you get with this patchset by running hackbench on an isolated CPU. > > > > In theory it looks like CPU isolation would benefit from this patchset > > but we try not to touch this code often, so any modification should come > > with proper justification, backed by numbers. > > > Yes, CPU isolation will benefit from this patchset. We use cyclictest tool > to test the maximum scheduling and interrupt delays, found that the > sched_switch process takes several microseconds sometimes, The analysis > result shows that the delay is caused by the ASID refresh. Do you know whether it's predominantly the spinlock or the TLBI that's causing this (or just a combination of the two)? I was talking to Will and concluded we should try to reuse the ASID pinning code that's already in that file rather than adding a new bitmap. At a high level, a thread migrating to an isolated CPU can have its ASID pinned. If context switching only happens between pinned ASIDs on an isolated CPU, we may be able to avoid the lock even if the generation rolled over on another CPU. I think the tricky problem is when a pinned ASID task eventually dies, possibly after migrating to another CPU. If we avoided the TLBI on generation roll-over for the isolated CPU, it will have stale entries. One option would be to broadcast a TLBI for the pinned ASID when the task dies, though this would introduce some jitter. An alternative may be to track whether a pinned ASID ever run on a CPU and do a local TLBI for that ASID when a pinned thread is migrated. All these need a lot more thinking and (formal) modelling. I have a TLA+ model but I haven't updated it to cover the pinned ASIDs. Or, alternatively, make the current code stand-alone and get it through CBMC (faking the spinlock as pthread mutexes and implementing some of the atomics in plain C with __CPROVER_atomic_begin/end).
On 2022/11/29 1:00, Catalin Marinas wrote: > On Thu, Nov 10, 2022 at 03:07:53PM +0800, Yunfeng Ye wrote: >> On 2022/11/9 20:43, Catalin Marinas wrote: >>> On Mon, Oct 17, 2022 at 04:32:02PM +0800, Yunfeng Ye wrote: >>>> After a rollover, the global generation will be flushed, which will >>>> cause the process mm->context.id on all CPUs do not match the >>>> generation. Thus, the process will compete for the global spinlock lock >>>> to reallocate a new ASID and refresh the TLBs of all CPUs on context >>>> switch. This will lead to the increase of scheduling delay and TLB miss. >>>> >>>> In some delay-sensitive scenarios, for example, part of CPUs are >>>> isolated, only a limited number of processes are deployed to run on the >>>> isolated CPUs. In this case, we do not want these key processes to be >>>> affected by the rollover of ASID. >>> >>> Part of this commit log should also go in the cover letter and it would> help to back this up by some numbers, e.g. what percentage improvement >>> you get with this patchset by running hackbench on an isolated CPU. >>> >>> In theory it looks like CPU isolation would benefit from this patchset >>> but we try not to touch this code often, so any modification should come >>> with proper justification, backed by numbers. >>> >> Yes, CPU isolation will benefit from this patchset. We use cyclictest tool >> to test the maximum scheduling and interrupt delays, found that the >> sched_switch process takes several microseconds sometimes, The analysis >> result shows that the delay is caused by the ASID refresh. > > Do you know whether it's predominantly the spinlock or the TLBI that's > causing this (or just a combination of the two)? > I think the spinlock is the main factor, I didn't distinguish how much time it took for each of the two. On the other hand, the TLBI is processed under the spinlock currently, its time-consuming will increase the time-consuming of the spinlock too. > I was talking to Will and concluded we should try to reuse the ASID > pinning code that's already in that file rather than adding a new > bitmap. At a high level, a thread migrating to an isolated CPU can have At first, I want to reuse the ASID pinned bitmap too, which is the same idea with you. but there is a difference between pinned bitmap and isolation bitmap, the pinned bitmap will not be changed when the generation roll-over, while the isolation bitmap need to be flushed. The idea "broadcast a TLBI for the pinned ASID when the task dies" you mentioned below maybe can reuse the pinned bitmap. I've considered this idea too, I think this method is not as good as the current two bitmap method: 1. This will introduce some TLBI jitter, and maybe increase the contention of spinlock when updating the pinned bitmap, which we don't want the jitter on the isolation CPU. 2. Another disadvantage is that if only one pinned bitmap is used and a large number of processes are on the isolation domain but the processes are not dead, the available ASIDs are insufficient. for example, more than 65536 processes running or sleeping on the isolation CPU, how to handle this situation? > its ASID pinned. If context switching only happens between pinned ASIDs > on an isolated CPU, we may be able to avoid the lock even if the > generation rolled over on another CPU. > > I think the tricky problem is when a pinned ASID task eventually dies, > possibly after migrating to another CPU. If we avoided the TLBI on > generation roll-over for the isolated CPU, it will have stale entries. > One option would be to broadcast a TLBI for the pinned ASID when the > task dies, though this would introduce some jitter. An alternative may > be to track whether a pinned ASID ever run on a CPU and do a local TLBI > for that ASID when a pinned thread is migrated. > > All these need a lot more thinking and (formal) modelling. I have a TLA+ > model but I haven't updated it to cover the pinned ASIDs. Or, > alternatively, make the current code stand-alone and get it through CBMC > (faking the spinlock as pthread mutexes and implementing some of the > atomics in plain C with __CPROVER_atomic_begin/end). >
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c index e402997aa1c2..0ea3e7485ae7 100644 --- a/arch/arm64/mm/context.c +++ b/arch/arm64/mm/context.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/mm.h> #include <linux/cpumask.h> +#include <linux/sched/isolation.h> #include <asm/cpufeature.h> #include <asm/mmu_context.h> @@ -24,10 +25,20 @@ struct asid_bitmap { unsigned long max; }; +enum { + ASID_HOUSEKEEPING = 0, + ASID_ISOLATION = 1, + ASID_TYPE_MAX, +}; + +struct asid_domain { + atomic64_t asid_generation; +}; + static u32 asid_bits; static DEFINE_RAW_SPINLOCK(cpu_asid_lock); -static atomic64_t asid_generation; +static struct asid_domain asid_domain[ASID_TYPE_MAX]; static unsigned long *asid_map; static DEFINE_PER_CPU(atomic64_t, active_asids); @@ -36,11 +47,16 @@ static cpumask_t tlb_flush_pending; static const struct cpumask *asid_housekeeping_mask; static struct asid_bitmap pinned_asid; +static struct asid_bitmap isolated_asid; + +static int asid_isolation_cmdline; +static DEFINE_STATIC_KEY_FALSE(asid_isolation_enable); #define ASID_MASK (~GENMASK(asid_bits - 1, 0)) -#define ASID_FIRST_VERSION (1UL << asid_bits) +#define NUM_USER_ASIDS (1UL << asid_bits) -#define NUM_USER_ASIDS ASID_FIRST_VERSION +#define ASID_ISOLATION_FLAG (NUM_USER_ASIDS) +#define ASID_FIRST_VERSION (NUM_USER_ASIDS << 1) #define ctxid2asid(asid) ((asid) & ~ASID_MASK) #define asid2ctxid(asid, genid) ((asid) | (genid)) @@ -94,6 +110,61 @@ static void set_kpti_asid_bits(unsigned long *map) memset(map, 0xaa, len); } +static inline bool is_isolated_asid(u64 asid) +{ + /* + * Note that asid 0 is not the isolated asid. The judgment + * is correct in this situation since the ASID_ISOLATION_FLAG + * bit is defined as 1 to indicate ISOLATION domain. + */ + return asid & ASID_ISOLATION_FLAG; +} + +static inline bool on_isolated_cpu(int cpu) +{ + return !cpumask_test_cpu(cpu, asid_housekeeping_mask); +} + +static inline int asid_domain_type(u64 asid, unsigned int cpu) +{ + if (on_isolated_cpu(cpu) || is_isolated_asid(asid)) + return ASID_ISOLATION; + + return ASID_HOUSEKEEPING; +} + +static inline int asid_flush_type(void) +{ + if (isolated_asid.nr > isolated_asid.max) + return ASID_ISOLATION; + else + return ASID_HOUSEKEEPING; +} + +static void asid_try_to_isolate(u64 asid) +{ + if (!static_branch_unlikely(&asid_isolation_enable)) + return; + + if (!is_isolated_asid(asid)) + return; + if (!__test_and_set_bit(ctxid2asid(asid), isolated_asid.map)) + isolated_asid.nr++; +} + +static void update_reserved_asid_bits(void) +{ + if (!static_branch_unlikely(&asid_isolation_enable)) + return; + + if (asid_flush_type() == ASID_HOUSEKEEPING) { + bitmap_or(asid_map, asid_map, isolated_asid.map, NUM_USER_ASIDS); + } else { + bitmap_zero(isolated_asid.map, NUM_USER_ASIDS); + isolated_asid.nr = 0; + } +} + static void set_reserved_asid_bits(void) { if (pinned_asid.map) @@ -102,23 +173,51 @@ static void set_reserved_asid_bits(void) set_kpti_asid_bits(asid_map); else bitmap_clear(asid_map, 0, NUM_USER_ASIDS); + + update_reserved_asid_bits(); } static void asid_generation_init(void) { - atomic64_set(&asid_generation, ASID_FIRST_VERSION); + struct asid_domain *ad; + + ad = &asid_domain[ASID_HOUSEKEEPING]; + atomic64_set(&ad->asid_generation, ASID_FIRST_VERSION); + + ad = &asid_domain[ASID_ISOLATION]; + atomic64_set(&ad->asid_generation, ASID_ISOLATION_FLAG); } static void flush_generation(void) { + struct asid_domain *ad = &asid_domain[ASID_HOUSEKEEPING]; + /* We're out of ASIDs, so increment the global generation count */ atomic64_add_return_relaxed(ASID_FIRST_VERSION, - &asid_generation); + &ad->asid_generation); + + if (asid_flush_type() == ASID_ISOLATION) { + ad = &asid_domain[ASID_ISOLATION]; + atomic64_add_return_relaxed(ASID_FIRST_VERSION, + &ad->asid_generation); + } } -static inline u64 asid_read_generation(void) +static inline u64 asid_read_generation(int type) { - return atomic64_read(&asid_generation); + struct asid_domain *ad = &asid_domain[type]; + + return atomic64_read(&ad->asid_generation); +} + +static inline u64 asid_curr_generation(u64 asid) +{ + int type = ASID_HOUSEKEEPING; + + if (static_branch_unlikely(&asid_isolation_enable)) + type = asid_domain_type(asid, smp_processor_id()); + + return asid_read_generation(type); } static inline bool asid_match(u64 asid, u64 genid) @@ -128,12 +227,28 @@ static inline bool asid_match(u64 asid, u64 genid) static inline bool asid_gen_match(u64 asid) { - return asid_match(asid, asid_read_generation()); + return asid_match(asid, asid_curr_generation(asid)); +} + +static bool asid_is_migrated(u64 asid, u64 newasid) +{ + if (!static_branch_unlikely(&asid_isolation_enable)) + return false; + + if (!is_isolated_asid(asid) && is_isolated_asid(newasid)) { + u64 generation = asid_read_generation(ASID_HOUSEKEEPING); + + return asid_match(asid, generation); + } + return false; } static const struct cpumask *flush_cpumask(void) { - return asid_housekeeping_mask; + if (asid_flush_type() == ASID_HOUSEKEEPING) + return asid_housekeeping_mask; + + return cpu_possible_mask; } static void flush_context(void) @@ -159,6 +274,7 @@ static void flush_context(void) if (asid == 0) asid = per_cpu(reserved_asids, i); __set_bit(ctxid2asid(asid), asid_map); + asid_try_to_isolate(asid); per_cpu(reserved_asids, i) = asid; } @@ -193,21 +309,23 @@ static bool check_update_reserved_asid(u64 asid, u64 newasid) return hit; } -static u64 new_context(struct mm_struct *mm) +static u64 new_context(struct mm_struct *mm, unsigned int cpu) { static u32 cur_idx = 1; u64 asid = atomic64_read(&mm->context.id); - u64 generation = asid_read_generation(); + int domain = asid_domain_type(asid, cpu); + u64 generation = asid_read_generation(domain); + u64 newasid; if (asid != 0) { - u64 newasid = asid2ctxid(ctxid2asid(asid), generation); + newasid = asid2ctxid(ctxid2asid(asid), generation); /* * If our current ASID was active during a rollover, we * can continue to use it and this was just a false alarm. */ if (check_update_reserved_asid(asid, newasid)) - return newasid; + goto out; /* * If it is pinned, we can keep using it. Note that reserved @@ -215,14 +333,21 @@ static u64 new_context(struct mm_struct *mm) * update the generation into the reserved_asids. */ if (refcount_read(&mm->context.pinned)) - return newasid; + goto out; /* * We had a valid ASID in a previous life, so try to re-use * it if possible. */ if (!__test_and_set_bit(ctxid2asid(asid), asid_map)) - return newasid; + goto out; + + /* + * We still have a valid ASID now, but the ASID is migrated from + * normal to isolated domain, we should re-use it. + */ + if (asid_is_migrated(asid, newasid)) + goto out; } /* @@ -241,11 +366,14 @@ static u64 new_context(struct mm_struct *mm) /* We have more ASIDs than CPUs, so this will always succeed */ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1); - generation = asid_read_generation(); + generation = asid_read_generation(domain); set_asid: __set_bit(asid, asid_map); cur_idx = asid; - return asid2ctxid(asid, generation); + newasid = asid2ctxid(asid, generation); +out: + asid_try_to_isolate(newasid); + return newasid; } void check_and_switch_context(struct mm_struct *mm) @@ -282,12 +410,12 @@ void check_and_switch_context(struct mm_struct *mm) raw_spin_lock_irqsave(&cpu_asid_lock, flags); /* Check that our ASID belongs to the current generation. */ asid = atomic64_read(&mm->context.id); + cpu = smp_processor_id(); if (!asid_gen_match(asid)) { - asid = new_context(mm); + asid = new_context(mm, cpu); atomic64_set(&mm->context.id, asid); } - cpu = smp_processor_id(); if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) local_flush_tlb_all(); @@ -327,11 +455,12 @@ unsigned long arm64_mm_context_get(struct mm_struct *mm) } if (!asid_gen_match(asid)) { + unsigned int cpu = smp_processor_id(); /* * We went through one or more rollover since that ASID was * used. Ensure that it is still valid, or generate a new one. */ - asid = new_context(mm); + asid = new_context(mm, cpu); atomic64_set(&mm->context.id, asid); } @@ -430,10 +559,36 @@ static int asids_update_limit(void) * are pinned, there still is at least one empty slot in the ASID map. */ pinned_asid.max = num_available_asids - num_possible_cpus() - 2; + + /* + * Generally, the user does not care about the number of asids, so set + * to half of the total number as the default setting of the maximum + * threshold of the isolated asid. + */ + if (isolated_asid.map) + isolated_asid.max = num_available_asids / 2; + return 0; } arch_initcall(asids_update_limit); +static void asid_isolation_init(void) +{ + if (asid_isolation_cmdline == 0) + return; + + if (!housekeeping_enabled(HK_TYPE_DOMAIN)) + return; + + isolated_asid.map = bitmap_zalloc(NUM_USER_ASIDS, GFP_KERNEL); + if (!isolated_asid.map) + return; + + asid_housekeeping_mask = housekeeping_cpumask(HK_TYPE_DOMAIN); + static_branch_enable(&asid_isolation_enable); + pr_info("ASID Isolation enable\n"); +} + static int asids_init(void) { asid_bits = get_cpu_asid_bits(); @@ -448,6 +603,7 @@ static int asids_init(void) pinned_asid.nr = 0; asid_housekeeping_mask = cpu_possible_mask; + asid_isolation_init(); /* * We cannot call set_reserved_asid_bits() here because CPU @@ -459,3 +615,10 @@ static int asids_init(void) return 0; } early_initcall(asids_init); + +static int __init asid_isolation_setup(char *str) +{ + asid_isolation_cmdline = 1; + return 1; +} +__setup("asid_isolation", asid_isolation_setup);
After a rollover, the global generation will be flushed, which will cause the process mm->context.id on all CPUs do not match the generation. Thus, the process will compete for the global spinlock lock to reallocate a new ASID and refresh the TLBs of all CPUs on context switch. This will lead to the increase of scheduling delay and TLB miss. In some delay-sensitive scenarios, for example, part of CPUs are isolated, only a limited number of processes are deployed to run on the isolated CPUs. In this case, we do not want these key processes to be affected by the rollover of ASID. An ASID isolation method can reduce interference. We divide the asid_generation into different domains, for example, HOUSEKEEPING and ISOLATION. Processes in different domains allocate ASID from the shared asid_map pool, then combine with the generation of local domain as the mm->context.id. After an ASID rollover, the generation of the HOUSEKEEPING domain can be flushed independently, and only the TLB of HOUSEKEEPING domain CPUs will be flushed, so the processes of ISOLATION domain will not be affected. In addition, the ASID of the ISOLATION domain is stored in the isolated_asid bitmap. When the asid_map is refreshed, the isolated_asid must be copied to the asid_map to ensure that the ASID of the ISOLATION domain is not allocated by other processes. The following figure shows the example: HOUSEKEEPING (genid: G1) ISOLATION (genid: G2) task1(G1,1) task2(G2,2) task3(G2,3) cpu0 cpu1 cpu3 cpu4 cpu5 ------------------------- ----------------------- \ / | \ / isolated_asid: [2,3] \ / asid_map: [1,2,3,4,...,65536] The task1 is running on the HOUSEKEEPING domain, it allocate ASID 1 from shared asid_map, so the context id of task1 is (G1,1). The task2 and task3 are running on the ISOLATION domain, they allocate ASID 2,3 from shared asid_map, and store ASID 2,3 to isolated_asid. the context id of task2 is (G2,2), and the context id of task3 is (G2,3). After a rollover, the generation of HOUSEKEEPING doamin is flushed, for example, it becomes to G3, then the context id of task1 is changed to (G3,1). In this time, the generation of ISOLATION domain is not affected. In some scenarios, a process has multiple threads, and different threads run in different domains, or processes migrate between different domains. But the process has only one context ID, there is a problem that how to select generation in this case. The way we're thinking is, as long as the process has run to ISOLATION doamin, select generation of ISOLATION doamin. For example: HOUSEKEEPING (genid: G1) ISOLATION (genid: G2) task1(G1,1) ====> task1(G2,1) task2(G2,2) <==== task2(G2,2) cpu0 cpu1 cpu3 cpu4 cpu5 ------------------------- ----------------------- When task1 is migrated from HOUSEKEEPING domain to ISOLATION domain, the generation G1 must be changed to G2, and save the ASID 1 to isolated_asid bitmap. But when task2 is migrated from ISOLATION domain to HOUSEKEEPING domain, it still use generation G2. In this way, we solve the problem that which generation should be selected in the scenario of process migration. As mentioned before, the generation of different domains is different. we divide the generation into two parts, the lowest bit is used as the Flag bit to indicate the HOUSEKEEPING and ISOLATION domain, and the rest bits are used as the Upper-generation. After a rollover, only the Upper-generation is flushed, the Flag part does not change in the entire life. This ensures that the genrentaion of different domains is different. asid_generation |---------------------------|-|--------| Upper-generation Flag Finally, it is important to select which domain generation and TLBs are flushed after a rollover. By default, only the HOUSEKEEPING domain is selected. When the number of ASIDs in the ISOLATION domain exceeds the max threshold, the ISOLATION domain is selected too. By default, the ASID isolation feature is disabled, and a cmdline parameter is provided to control whether the ASID isolation feature is enabled. Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> --- arch/arm64/mm/context.c | 203 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 183 insertions(+), 20 deletions(-)