diff mbox series

[1/1] arm64: dts: freescale: Add PWM fan support

Message ID 20221018093341.2581862-1-alexander.stein@ew.tq-group.com (mailing list archive)
State New, archived
Headers show
Series [1/1] arm64: dts: freescale: Add PWM fan support | expand

Commit Message

Alexander Stein Oct. 18, 2022, 9:33 a.m. UTC
This adds the support for optional PWM fan 422J/2HP.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Now with inverted polarity support for pwm-fan in place, add PWM fan DT
nodes for TQMa8MPQL + MBa8MPxL. As this is optional, it's disabled by
default. This is based on next-20221018.

Note: This device needs 'pwm1_enable' set to 3. E.g. using udev rule:
SUBSYSTEM=="hwmon", DRIVERS=="pwm-fan", ATTR{pwm1_enable}="3"

 .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)

Comments

Shawn Guo Oct. 29, 2022, 4:01 a.m. UTC | #1
On Tue, Oct 18, 2022 at 11:33:41AM +0200, Alexander Stein wrote:
> This adds the support for optional PWM fan 422J/2HP.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Board name should be specified in the patch subject to tell this is a
board specific change, maybe something like `arm64: dts: mba8mpxl: ...`?

Shawn

> ---
> Now with inverted polarity support for pwm-fan in place, add PWM fan DT
> nodes for TQMa8MPQL + MBa8MPxL. As this is optional, it's disabled by
> default. This is based on next-20221018.
> 
> Note: This device needs 'pwm1_enable' set to 3. E.g. using udev rule:
> SUBSYSTEM=="hwmon", DRIVERS=="pwm-fan", ATTR{pwm1_enable}="3"
> 
>  .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 76 +++++++++++++++++++
>  1 file changed, 76 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> index 7a32379cd006..ffd117f17bbe 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> @@ -55,6 +55,21 @@ clk_xtal25: clk-xtal25 {
>  		clock-frequency = <25000000>;
>  	};
>  
> +	fan0: pwm-fan {
> +		compatible = "pwm-fan";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pwmfan>;
> +		fan-supply = <&reg_pwm_fan>;
> +		#cooling-cells = <2>;
> +		/* typical 25 kHz -> 40.000 nsec */
> +		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
> +		cooling-levels = <0 32 64 128 196 240>;
> +		pulses-per-revolution = <2>;
> +		interrupt-parent = <&gpio5>;
> +		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
> +		status = "disabled";
> +	};
> +
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  		pinctrl-names = "default";
> @@ -115,6 +130,18 @@ display: display {
>  		status = "disabled";
>  	};
>  
> +	reg_pwm_fan: regulator-pwm-fan {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_regpwmfan>;
> +		regulator-name = "FAN_PWR";
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		vin-supply = <&reg_vcc_12v0>;
> +	};
> +
>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		pinctrl-names = "default";
> @@ -172,6 +199,47 @@ linux,cma {
>  			linux,cma-default;
>  		};
>  	};
> +
> +	thermal-zones {
> +		soc-thermal {
> +			trips {
> +				soc_active0: trip-active0 {
> +					temperature = <40000>;
> +					hysteresis = <5000>;
> +					type = "active";
> +				};
> +
> +				soc_active1: trip-active1 {
> +					temperature = <48000>;
> +					hysteresis = <3000>;
> +					type = "active";
> +				};
> +
> +				soc_active2: trip-active2 {
> +					temperature = <60000>;
> +					hysteresis = <10000>;
> +					type = "active";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map1 {
> +					trip = <&soc_active0>;
> +					cooling-device = <&fan0 1 1>;
> +				};
> +
> +				map2 {
> +					trip = <&soc_active1>;
> +					cooling-device = <&fan0 2 2>;
> +				};
> +
> +				map3 {
> +					trip = <&soc_active2>;
> +					cooling-device = <&fan0 3 3>;
> +				};
> +			};
> +		};
> +	};
>  };
>  
>  &ecspi1 {
> @@ -725,10 +793,18 @@ pinctrl_pwm3: pwm3grp {
>  		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
>  	};
>  
> +	pinctrl_pwmfan: pwmfangrp {
> +		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>; /* FAN RPM */
> +	};
> +
>  	pinctrl_reg12v0: reg12v0grp {
>  		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
>  	};
>  
> +	pinctrl_regpwmfan: regpwmfangrp {
> +		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x80>;
> +	};
> +
>  	/* X61 */
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,
> -- 
> 2.25.1
>
Alexander Stein Nov. 1, 2022, 6:50 a.m. UTC | #2
Am Samstag, 29. Oktober 2022, 06:01:53 CET schrieb Shawn Guo:
> On Tue, Oct 18, 2022 at 11:33:41AM +0200, Alexander Stein wrote:
> > This adds the support for optional PWM fan 422J/2HP.
> > 
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> 
> Board name should be specified in the patch subject to tell this is a
> board specific change, maybe something like `arm64: dts: mba8mpxl: ...`?

Yes, you are right. Will fix that. Thanks
Alexander

> Shawn
> 
> > ---
> > Now with inverted polarity support for pwm-fan in place, add PWM fan DT
> > nodes for TQMa8MPQL + MBa8MPxL. As this is optional, it's disabled by
> > default. This is based on next-20221018.
> > 
> > Note: This device needs 'pwm1_enable' set to 3. E.g. using udev rule:
> > SUBSYSTEM=="hwmon", DRIVERS=="pwm-fan", ATTR{pwm1_enable}="3"
> > 
> >  .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 76 +++++++++++++++++++
> >  1 file changed, 76 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index
> > 7a32379cd006..ffd117f17bbe 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> > @@ -55,6 +55,21 @@ clk_xtal25: clk-xtal25 {
> > 
> >  		clock-frequency = <25000000>;
> >  	
> >  	};
> > 
> > +	fan0: pwm-fan {
> > +		compatible = "pwm-fan";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_pwmfan>;
> > +		fan-supply = <&reg_pwm_fan>;
> > +		#cooling-cells = <2>;
> > +		/* typical 25 kHz -> 40.000 nsec */
> > +		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
> > +		cooling-levels = <0 32 64 128 196 240>;
> > +		pulses-per-revolution = <2>;
> > +		interrupt-parent = <&gpio5>;
> > +		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
> > +		status = "disabled";
> > +	};
> > +
> > 
> >  	gpio-keys {
> >  	
> >  		compatible = "gpio-keys";
> >  		pinctrl-names = "default";
> > 
> > @@ -115,6 +130,18 @@ display: display {
> > 
> >  		status = "disabled";
> >  	
> >  	};
> > 
> > +	reg_pwm_fan: regulator-pwm-fan {
> > +		compatible = "regulator-fixed";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_regpwmfan>;
> > +		regulator-name = "FAN_PWR";
> > +		regulator-min-microvolt = <12000000>;
> > +		regulator-max-microvolt = <12000000>;
> > +		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +		vin-supply = <&reg_vcc_12v0>;
> > +	};
> > +
> > 
> >  	reg_usdhc2_vmmc: regulator-usdhc2 {
> >  	
> >  		compatible = "regulator-fixed";
> >  		pinctrl-names = "default";
> > 
> > @@ -172,6 +199,47 @@ linux,cma {
> > 
> >  			linux,cma-default;
> >  		
> >  		};
> >  	
> >  	};
> > 
> > +
> > +	thermal-zones {
> > +		soc-thermal {
> > +			trips {
> > +				soc_active0: trip-active0 {
> > +					temperature = <40000>;
> > +					hysteresis = <5000>;
> > +					type = "active";
> > +				};
> > +
> > +				soc_active1: trip-active1 {
> > +					temperature = <48000>;
> > +					hysteresis = <3000>;
> > +					type = "active";
> > +				};
> > +
> > +				soc_active2: trip-active2 {
> > +					temperature = <60000>;
> > +					hysteresis = <10000>;
> > +					type = "active";
> > +				};
> > +			};
> > +
> > +			cooling-maps {
> > +				map1 {
> > +					trip = <&soc_active0>;
> > +					cooling-device = <&fan0 1 
1>;
> > +				};
> > +
> > +				map2 {
> > +					trip = <&soc_active1>;
> > +					cooling-device = <&fan0 2 
2>;
> > +				};
> > +
> > +				map3 {
> > +					trip = <&soc_active2>;
> > +					cooling-device = <&fan0 3 
3>;
> > +				};
> > +			};
> > +		};
> > +	};
> > 
> >  };
> >  
> >  &ecspi1 {
> > 
> > @@ -725,10 +793,18 @@ pinctrl_pwm3: pwm3grp {
> > 
> >  		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		
0x14>;
> >  	
> >  	};
> > 
> > +	pinctrl_pwmfan: pwmfangrp {
> > +		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		
0x80>; /* FAN RPM */
> > +	};
> > +
> > 
> >  	pinctrl_reg12v0: reg12v0grp {
> >  	
> >  		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		
0x140>; /* VCC12V
> >  		enable */
> >  	
> >  	};
> > 
> > +	pinctrl_regpwmfan: regpwmfangrp {
> > +		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		
0x80>;
> > +	};
> > +
> > 
> >  	/* X61 */
> >  	pinctrl_uart1: uart1grp {
> >  	
> >  		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		
0x140>,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 7a32379cd006..ffd117f17bbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -55,6 +55,21 @@  clk_xtal25: clk-xtal25 {
 		clock-frequency = <25000000>;
 	};
 
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -115,6 +130,18 @@  display: display {
 		status = "disabled";
 	};
 
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpwmfan>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_12v0>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -172,6 +199,47 @@  linux,cma {
 			linux,cma-default;
 		};
 	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				soc_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				soc_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				soc_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&soc_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&soc_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&soc_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
 };
 
 &ecspi1 {
@@ -725,10 +793,18 @@  pinctrl_pwm3: pwm3grp {
 		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
 	};
 
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>; /* FAN RPM */
+	};
+
 	pinctrl_reg12v0: reg12v0grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
 	};
 
+	pinctrl_regpwmfan: regpwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x80>;
+	};
+
 	/* X61 */
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,