diff mbox series

[v2,2/2] arm64: dts: k3-j72*: correct compatible for syscon entries

Message ID 20221020032802.308545-3-mranostay@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: add new compatibles for J7 platforms | expand

Commit Message

Matt Ranostay Oct. 20, 2022, 3:28 a.m. UTC
Add missing ti,j7*-system-controller compatible to bus defines in mcu/wakeup
domains to avoid the following similar warnings from dt-schema checks:

arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@40f00000: compatible: ['syscon', 'simple-mfd'] is too short'

Signed-off-by: Matt Ranostay <mranostay@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi  | 2 +-
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi  | 2 +-
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski Oct. 20, 2022, 1:49 p.m. UTC | #1
On 19/10/2022 23:28, Matt Ranostay wrote:
> Add missing ti,j7*-system-controller compatible to bus defines in mcu/wakeup
> domains to avoid the following similar warnings from dt-schema checks:
> 
> arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@40f00000: compatible: ['syscon', 'simple-mfd'] is too short'
> 
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index e5be78a58682..2025aab4b66f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -35,7 +35,7 @@  k3_reset: reset-controller {
 	};
 
 	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,j7200-system-controller", "syscon", "simple-mfd";
 		reg = <0x00 0x40f00000 0x00 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index df08724bbf1c..5d9ec221fa34 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -35,7 +35,7 @@  k3_reset: reset-controller {
 	};
 
 	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
 		reg = <0x0 0x40f00000 0x0 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..dfd40369b931 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -69,7 +69,7 @@  wkup_gpio_intr: interrupt-controller@42200000 {
 	};
 
 	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,j721s2-system-controller", "syscon", "simple-mfd";
 		reg = <0x0 0x40f00000 0x0 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;