[03/21] ARM: s3c: remove most s3c64xx board support

Message ID	20221021203329.4143397-3-arnd@kernel.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Arnd Bergmann <arnd@kernel.org> To: linux-arm-kernel@lists.infradead.org, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: linux-kernel@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>, Simtec Linux Team <linux@simtec.co.uk>, Arnd Bergmann <arnd@arndb.de>, Kwangwoo Lee <kwangwoo.lee@gmail.com>, Peter Korsgaard <jacmet@sunsite.dk>, Darius Augulis <augulis.darius@gmail.com>, Maurus Cuelenaere <mcuelenaere@gmail.com>, Alim Akhtar <alim.akhtar@samsung.com>, Heiko Stuebner <heiko@sntech.de>, Juerg Haefliger <juerg.haefliger@canonical.com>, Sam Protsenko <semen.protsenko@linaro.org>, linux-samsung-soc@vger.kernel.org Subject: [PATCH 03/21] ARM: s3c: remove most s3c64xx board support Date: Fri, 21 Oct 2022 22:27:36 +0200 Message-Id: <20221021203329.4143397-3-arnd@kernel.org> In-Reply-To: <20221021202254.4142411-1-arnd@kernel.org> References: <20221021202254.4142411-1-arnd@kernel.org> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	ARM: s3c: clean out obsolete platforms \| expand [00/21] ARM: s3c: clean out obsolete platforms [01/21] ARM: s3c: remove all s3c24xx support [02/21] ARM: s3c: remove s3c24xx specific hacks [03/21] ARM: s3c: remove most s3c64xx board support [04/21] ARM: s3c: remove adc.c [05/21] ARM: s3c: simplify platform code [06/21] ARM: s3c: remove s3c6400 support [07/21] power: remove s3c adc battery driver [08/21] hwmon: remove s3c driver [09/21] pata: remove samsung_cf driver [10/21] mmc: remove s3cmci driver [11/21] clk: remove s3c24xx driver [12/21] leds: remove s3c24xx driver [13/21] usb: gadget: remove s3c24xx drivers [14/21] dmaengine: remove s3c24xx driver [15/21] cpufreq: remove s3c24xx drivers [16/21] fbdev: remove s3c2410 framebuffer [17/21] input: remove s3c24xx touchscreen driver [18/21] pinctrl: remove s3c24xx driver [19/21] spi: remove s3c24xx driver [20/21] soc: s3c: remove pm-debug hack [21/21] ASoC: samsung: remove unused drivers

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx index 0c1b91c3ac5f..0da214c43fba 100644 --- a/arch/arm/mach-s3c/Kconfig.s3c64xx +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx @@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI Internal configuration for default SDHCI setup for S3C6400 and S3C6410 SoCs. -config S3C64XX_DEV_ONENAND1 - bool - help - Compile in platform device definition for OneNAND1 controller - -config SAMSUNG_DEV_BACKLIGHT - bool - depends on SAMSUNG_DEV_PWM - help - Compile in platform device definition LCD backlight with PWM Timer - # platform specific device setup config S3C64XX_SETUP_I2C0 @@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY # S36400 Macchine support -config MACH_SMDK6400 - bool "SMDK6400" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6400 - select S3C64XX_SETUP_SDHCI - select S3C_DEV_HSMMC1 - help - Machine support for the Samsung SMDK6400 - -# S3C6410 machine support - -config MACH_ANW6410 - bool "A&W6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - help - Machine support for the A&W6410 - -config MACH_MINI6410 - bool "MINI6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the FriendlyARM MINI6410 - -config MACH_REAL6410 - bool "REAL6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the CoreWind REAL6410 - -config MACH_SMDK6410 - bool "SMDK6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6410 - -# At least some of the SMDK6410s were shipped with the card detect -# for the MMC/SD slots connected to the same input. This means that -# either the boards need to be altered to have channel0 to an alternate -# configuration or that only one slot can be used. - -choice - prompt "SMDK6410 MMC/SD slot setup" - depends on MACH_SMDK6410 - -config SMDK6410_SD_CH0 - bool "Use channel 0 only" - depends on MACH_SMDK6410 - help - Select CON7 (channel 0) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -config SMDK6410_SD_CH1 - bool "Use channel 1 only" - depends on MACH_SMDK6410 - help - Select CON6 (channel 1) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -endchoice - -config SMDK6410_WM1190_EV1 - bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM8350_I2C - select REGULATOR - select REGULATOR_WM8350 - help - The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC - and audio daughtercard for the Samsung SMDK6410 reference - platform. Enabling this option will build support for this - module into the kernel. The presence of the module will be - detected at runtime so the resulting kernel can be used - with or without the 1190-EV1 fitted. - -config SMDK6410_WM1192_EV1 - bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM831X - select MFD_WM831X_I2C - select REGULATOR - select REGULATOR_WM831X - help - The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC - daughtercard for the Samsung SMDK6410 reference platform. - Enabling this option will build support for this module into - the kernel. The presence of the daughtercard will be - detected at runtime so the resulting kernel can be used - with or without the 1192-EV1 fitted. - -config MACH_NCP - bool "NCP" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_I2C1 - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - help - Machine support for the Samsung NCP - -config MACH_HMT - bool "Airgoo HMT" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_PWM - help - Machine support for the Airgoo HMT - -config MACH_SMARTQ - bool - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HWMON - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Shared machine support for SmartQ 5/7 - -config MACH_SMARTQ5 - bool "SmartQ 5" - depends on ATAGS && UNUSED_BOARD_FILES - select MACH_SMARTQ - help - Machine support for the SmartQ 5 - -config MACH_SMARTQ7 - bool "SmartQ 7" - depends on ATAGS && UNUSED_BOARD_FILES - select MACH_SMARTQ - help - Machine support for the SmartQ 7 - config MACH_WLF_CRAGG_6410 bool "Wolfson Cragganmore 6410" depends on ATAGS diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx index 21e919bf2cd1..ba179a22c2af 100644 --- a/arch/arm/mach-s3c/Makefile.s3c64xx +++ b/arch/arm/mach-s3c/Makefile.s3c64xx @@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o -obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o - # Machine support - -obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o -obj-$(CONFIG_MACH_HMT) += mach-hmt.o -obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o -obj-$(CONFIG_MACH_NCP) += mach-ncp.o -obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o -obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o -obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o -obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o -obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o endif diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c deleted file mode 100644 index 65488b61e50c..000000000000 diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c deleted file mode 100644 index b67eae43e04f..000000000000 diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c deleted file mode 100644 index 49ba16c447aa..000000000000 diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c deleted file mode 100644 index 058ae9e8b89f..000000000000 diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c deleted file mode 100644 index 1e65f8bce5c4..000000000000 diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c deleted file mode 100644 index 8c10ebc38a9c..000000000000 diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c deleted file mode 100644 index 5b6e7c2a85ef..000000000000 diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h deleted file mode 100644 index f98132f4f430..000000000000 diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c deleted file mode 100644 index ce3fce0bba20..000000000000 diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c deleted file mode 100644 index 78ca0e704797..000000000000 diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c deleted file mode 100644 index a3c1b2a82455..000000000000 diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c deleted file mode 100644 index e57b2bb61484..000000000000

[03/21] ARM: s3c: remove most s3c64xx board support

Commit Message

Comments

Patch