diff mbox series

[09/21] pata: remove samsung_cf driver

Message ID 20221021203329.4143397-9-arnd@kernel.org (mailing list archive)
State New, archived
Headers show
Series ARM: s3c: clean out obsolete platforms | expand

Commit Message

Arnd Bergmann Oct. 21, 2022, 8:27 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>

This device was only used by the smdk6410 board file that is now
gone, so the driver can be removed as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/ata/Kconfig                          |  10 -
 drivers/ata/Makefile                         |   1 -
 drivers/ata/pata_samsung_cf.c                | 662 -------------------
 include/linux/platform_data/ata-samsung_cf.h |  31 -
 4 files changed, 704 deletions(-)
 delete mode 100644 drivers/ata/pata_samsung_cf.c
 delete mode 100644 include/linux/platform_data/ata-samsung_cf.h

Comments

Sergey Shtylyov Oct. 23, 2022, 2:35 p.m. UTC | #1
Hello!

On 10/21/22 11:27 PM, Arnd Bergmann wrote:

> From: Arnd Bergmann <arnd@arndb.de>
> 
> This device was only used by the smdk6410 board file that is now
> gone, so the driver can be removed as well.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>

[...]

MBR, Sergey
Damien Le Moal Oct. 23, 2022, 10:41 p.m. UTC | #2
On 10/22/22 05:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> This device was only used by the smdk6410 board file that is now
> gone, so the driver can be removed as well.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Arnd,

This patch does not apply to the for-6.2 branch of libata tree. I can fix
that easily, but I am concerned about the fact that this deletes the
header file include/linux/platform_data/ata-samsung_cf.h, which has some
function declarations for gpio used under arch/arm/mach-s3c. So If I apply
this before you queue the other patches for this driver in for-next, we
may endup with build failures. No ?

> ---
>  drivers/ata/Kconfig                          |  10 -
>  drivers/ata/Makefile                         |   1 -
>  drivers/ata/pata_samsung_cf.c                | 662 -------------------
>  include/linux/platform_data/ata-samsung_cf.h |  31 -
>  4 files changed, 704 deletions(-)
>  delete mode 100644 drivers/ata/pata_samsung_cf.c
>  delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 6b446cfc3455..3b8cb7a29efd 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -1136,16 +1136,6 @@ config PATA_RZ1000
>  
>  	  If unsure, say N.
>  
> -config PATA_SAMSUNG_CF
> -	tristate "Samsung SoC PATA support"
> -	depends on SAMSUNG_DEV_IDE || COMPILE_TEST
> -	select PATA_TIMINGS
> -	help
> -	  This option enables basic support for Samsung's S3C/S5P board
> -	  PATA controllers via the new ATA layer
> -
> -	  If unsure, say N.
> -
>  config PATA_WINBOND_VLB
>  	tristate "Winbond W83759A VLB PATA support (Experimental)"
>  	depends on ISA
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index 2cca9f500649..4ee5c0761d90 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
>  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
>  obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
>  obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
> -obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
>  
>  obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
>  
> diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
> deleted file mode 100644
> index aba1536ddd44..000000000000
> diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
> deleted file mode 100644
> index fccf969dc4da..000000000000
Damien Le Moal Oct. 23, 2022, 10:43 p.m. UTC | #3
On 10/24/22 07:41, Damien Le Moal wrote:
> On 10/22/22 05:27, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> This device was only used by the smdk6410 board file that is now
>> gone, so the driver can be removed as well.
>>
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> Arnd,
> 
> This patch does not apply to the for-6.2 branch of libata tree. I can fix
> that easily, but I am concerned about the fact that this deletes the
> header file include/linux/platform_data/ata-samsung_cf.h, which has some
> function declarations for gpio used under arch/arm/mach-s3c. So If I apply
> this before you queue the other patches for this driver in for-next, we
> may endup with build failures. No ?

It may be simpler for you to take this patch ? If yes, then:

Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

> 
>> ---
>>  drivers/ata/Kconfig                          |  10 -
>>  drivers/ata/Makefile                         |   1 -
>>  drivers/ata/pata_samsung_cf.c                | 662 -------------------
>>  include/linux/platform_data/ata-samsung_cf.h |  31 -
>>  4 files changed, 704 deletions(-)
>>  delete mode 100644 drivers/ata/pata_samsung_cf.c
>>  delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
>>
>> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
>> index 6b446cfc3455..3b8cb7a29efd 100644
>> --- a/drivers/ata/Kconfig
>> +++ b/drivers/ata/Kconfig
>> @@ -1136,16 +1136,6 @@ config PATA_RZ1000
>>  
>>  	  If unsure, say N.
>>  
>> -config PATA_SAMSUNG_CF
>> -	tristate "Samsung SoC PATA support"
>> -	depends on SAMSUNG_DEV_IDE || COMPILE_TEST
>> -	select PATA_TIMINGS
>> -	help
>> -	  This option enables basic support for Samsung's S3C/S5P board
>> -	  PATA controllers via the new ATA layer
>> -
>> -	  If unsure, say N.
>> -
>>  config PATA_WINBOND_VLB
>>  	tristate "Winbond W83759A VLB PATA support (Experimental)"
>>  	depends on ISA
>> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
>> index 2cca9f500649..4ee5c0761d90 100644
>> --- a/drivers/ata/Makefile
>> +++ b/drivers/ata/Makefile
>> @@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
>>  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
>>  obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
>>  obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
>> -obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
>>  
>>  obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
>>  
>> diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
>> deleted file mode 100644
>> index aba1536ddd44..000000000000
>> diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
>> deleted file mode 100644
>> index fccf969dc4da..000000000000
>
Krzysztof Kozlowski Oct. 24, 2022, 12:34 p.m. UTC | #4
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> This device was only used by the smdk6410 board file that is now
> gone, so the driver can be removed as well.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  drivers/ata/Kconfig                          |  10 -
>  drivers/ata/Makefile                         |   1 -
>  drivers/ata/pata_samsung_cf.c                | 662 -------------------
>  include/linux/platform_data/ata-samsung_cf.h |  31 -
>  4 files changed, 704 deletions(-)
>  delete mode 100644 drivers/ata/pata_samsung_cf.c
>  delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 6b446cfc3455..3b8cb7a29efd 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -1136,16 +1136,6 @@ config PATA_RZ1000
>  
>  	  If unsure, say N.
>  
> -config PATA_SAMSUNG_CF
> -	tristate "Samsung SoC PATA support"
> -	depends on SAMSUNG_DEV_IDE || COMPILE_TEST
> -	select PATA_TIMINGS
> -	help
> -	  This option enables basic support for Samsung's S3C/S5P board
> -	  PATA controllers via the new ATA layer
> -

This driver is present and somehow usable on newer platform: S5PV210.
It's not converted to DT, but someone might want to do it. OTOH, if no
one added DT for all this time, I doubt anyone will.
Postmarket/Lineage-folks target smartphones, so don't use it.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Arnd Bergmann Oct. 24, 2022, 2:24 p.m. UTC | #5
On Mon, Oct 24, 2022, at 00:41, Damien Le Moal wrote:
> On 10/22/22 05:27, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>> 
>> This device was only used by the smdk6410 board file that is now
>> gone, so the driver can be removed as well.
>
> This patch does not apply to the for-6.2 branch of libata tree. I can fix
> that easily, but I am concerned about the fact that this deletes the
> header file include/linux/platform_data/ata-samsung_cf.h, which has some
> function declarations for gpio used under arch/arm/mach-s3c. So If I apply
> this before you queue the other patches for this driver in for-next, we
> may endup with build failures. No ?

Right, that was a mistake on my end. I had tested the full 98-patch
series in sequence and assumed that the driver removal would be
fine to apply separately. I'll just merge this one through the
SoC tree then. I have double-checked the pbk3710 and palmld
drivers, and those should not have a problem like this one.
I still need to send the palmld driver, as the mach-pxa series
had some unrelated issues.

    Arnd
diff mbox series

Patch

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6b446cfc3455..3b8cb7a29efd 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1136,16 +1136,6 @@  config PATA_RZ1000
 
 	  If unsure, say N.
 
-config PATA_SAMSUNG_CF
-	tristate "Samsung SoC PATA support"
-	depends on SAMSUNG_DEV_IDE || COMPILE_TEST
-	select PATA_TIMINGS
-	help
-	  This option enables basic support for Samsung's S3C/S5P board
-	  PATA controllers via the new ATA layer
-
-	  If unsure, say N.
-
 config PATA_WINBOND_VLB
 	tristate "Winbond W83759A VLB PATA support (Experimental)"
 	depends on ISA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 2cca9f500649..4ee5c0761d90 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -109,7 +109,6 @@  obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
-obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
 
 obj-$(CONFIG_PATA_PXA)		+= pata_pxa.o
 
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
deleted file mode 100644
index aba1536ddd44..000000000000
diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
deleted file mode 100644
index fccf969dc4da..000000000000