Message ID | 20221025050355.3979380-7-colin.foster@in-advantage.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | dt-binding preparation for ocelot switches | expand |
On Mon, Oct 24, 2022 at 10:03:54PM -0700, Colin Foster wrote: > The dsa-port.yaml binding had several references that can be common to all > ethernet ports, not just dsa-specific ones. Break out the generic bindings > to ethernet-switch-port.yaml they can be used by non-dsa drivers. > > Signed-off-by: Colin Foster <colin.foster@in-advantage.com> > Suggested-by: Vladimir Oltean <olteanv@gmail.com> > --- > .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +---------- > .../bindings/net/ethernet-switch-port.yaml | 44 +++++++++++++++++++ > .../bindings/net/ethernet-switch.yaml | 4 +- > MAINTAINERS | 1 + > 4 files changed, 50 insertions(+), 25 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml > > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml > index 10ad7e71097b..c5144e733511 100644 > --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml > @@ -4,7 +4,7 @@ > $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml# > $schema: http://devicetree.org/meta-schemas/core.yaml# > > -title: Ethernet Switch port Device Tree Bindings > +title: DSA Switch port Device Tree Bindings > > maintainers: > - Andrew Lunn <andrew@lunn.ch> > @@ -15,12 +15,9 @@ description: > Ethernet switch port Description > > allOf: > - - $ref: /schemas/net/ethernet-controller.yaml# > + - $ref: /schemas/net/ethernet-switch-port.yaml# > > properties: > - reg: > - description: Port number > - > label: > description: > Describes the label associated with this port, which will become > @@ -57,25 +54,6 @@ properties: > - rtl8_4t > - seville > > - phy-handle: true > - > - phy-mode: true > - > - fixed-link: true > - > - mac-address: true > - > - sfp: true > - > - managed: true > - > - rx-internal-delay-ps: true > - > - tx-internal-delay-ps: true > - > -required: > - - reg > - > # CPU and DSA ports must have phylink-compatible link descriptions > if: > oneOf: > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml > new file mode 100644 > index 000000000000..cb1e5e12bf0a > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml > @@ -0,0 +1,44 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Ethernet Switch port Device Tree Bindings > + > +maintainers: > + - Andrew Lunn <andrew@lunn.ch> > + - Florian Fainelli <f.fainelli@gmail.com> > + - Vivien Didelot <vivien.didelot@gmail.com> > + > +description: > + Ethernet switch port Description > + > +$ref: ethernet-controller.yaml# > + > +properties: > + reg: > + description: Port number > + > + phy-handle: true > + > + phy-mode: true > + > + fixed-link: true > + > + mac-address: true > + > + sfp: true > + > + managed: true > + > + rx-internal-delay-ps: true > + > + tx-internal-delay-ps: true > + > +required: > + - reg > + > +additionalProperties: true > + > +... > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml > index fbaac536673d..f698857619da 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml > @@ -36,7 +36,9 @@ patternProperties: > type: object > description: Ethernet switch ports > > - $ref: /schemas/net/dsa/dsa-port.yaml# > + allOf: > + - $ref: /schemas/net/dsa/dsa-port.yaml# > + - $ref: ethernet-switch-port.yaml# dsa-port.yaml references ethernet-switch-port.yaml, so you shouldn't need both here. I imagine what you were trying to do here was say it is either one of these, not both. I don't think this is going work for the same reasons I mentioned with unevaluatedProperties. Rob
On Wed, Oct 26, 2022 at 12:44:21PM -0500, Rob Herring wrote: > On Mon, Oct 24, 2022 at 10:03:54PM -0700, Colin Foster wrote: > > The dsa-port.yaml binding had several references that can be common to all > > ethernet ports, not just dsa-specific ones. Break out the generic bindings > > to ethernet-switch-port.yaml they can be used by non-dsa drivers. > > > > Signed-off-by: Colin Foster <colin.foster@in-advantage.com> > > Suggested-by: Vladimir Oltean <olteanv@gmail.com> > > --- > > .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +---------- > > .../bindings/net/ethernet-switch-port.yaml | 44 +++++++++++++++++++ > > .../bindings/net/ethernet-switch.yaml | 4 +- > > MAINTAINERS | 1 + > > 4 files changed, 50 insertions(+), 25 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml > > > > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml > > index 10ad7e71097b..c5144e733511 100644 > > --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml > > +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml > > @@ -4,7 +4,7 @@ > > $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml# > > $schema: http://devicetree.org/meta-schemas/core.yaml# > > > > -title: Ethernet Switch port Device Tree Bindings > > +title: DSA Switch port Device Tree Bindings > > > > maintainers: > > - Andrew Lunn <andrew@lunn.ch> > > @@ -15,12 +15,9 @@ description: > > Ethernet switch port Description > > > > allOf: > > - - $ref: /schemas/net/ethernet-controller.yaml# > > + - $ref: /schemas/net/ethernet-switch-port.yaml# > > > > properties: > > - reg: > > - description: Port number > > - > > label: > > description: > > Describes the label associated with this port, which will become > > @@ -57,25 +54,6 @@ properties: > > - rtl8_4t > > - seville > > > > - phy-handle: true > > - > > - phy-mode: true > > - > > - fixed-link: true > > - > > - mac-address: true > > - > > - sfp: true > > - > > - managed: true > > - > > - rx-internal-delay-ps: true > > - > > - tx-internal-delay-ps: true > > - > > -required: > > - - reg > > - > > # CPU and DSA ports must have phylink-compatible link descriptions > > if: > > oneOf: > > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml > > new file mode 100644 > > index 000000000000..cb1e5e12bf0a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml > > @@ -0,0 +1,44 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Ethernet Switch port Device Tree Bindings > > + > > +maintainers: > > + - Andrew Lunn <andrew@lunn.ch> > > + - Florian Fainelli <f.fainelli@gmail.com> > > + - Vivien Didelot <vivien.didelot@gmail.com> > > + > > +description: > > + Ethernet switch port Description > > + > > +$ref: ethernet-controller.yaml# > > + > > +properties: > > + reg: > > + description: Port number > > + > > + phy-handle: true > > + > > + phy-mode: true > > + > > + fixed-link: true > > + > > + mac-address: true > > + > > + sfp: true > > + > > + managed: true > > + > > + rx-internal-delay-ps: true > > + > > + tx-internal-delay-ps: true > > + > > +required: > > + - reg > > + > > +additionalProperties: true > > + > > +... > > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml > > index fbaac536673d..f698857619da 100644 > > --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml > > +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml > > @@ -36,7 +36,9 @@ patternProperties: > > type: object > > description: Ethernet switch ports > > > > - $ref: /schemas/net/dsa/dsa-port.yaml# > > + allOf: > > + - $ref: /schemas/net/dsa/dsa-port.yaml# > > + - $ref: ethernet-switch-port.yaml# > > dsa-port.yaml references ethernet-switch-port.yaml, so you shouldn't > need both here. > > I imagine what you were trying to do here was say it is either one of > these, not both. I don't think this is going work for the same reasons I > mentioned with unevaluatedProperties. Oh, that was definitely a mistake for me to reference ethernet-switch-port.yaml. And that was exactly requested of me when Vladimir helped guide me down this path: """ 6. The ethernet-switch.yaml will have "$ref: ethernet-switch-port.yaml#" and "$ref: dsa-port.yaml". The dsa-port.yaml schema will *not* have "$ref: ethernet-switch-port.yaml#", just its custom additions. I'm not 100% on this, but I think there will be a problem if: - dsa.yaml references ethernet-switch.yaml - ethernet-switch.yaml references ethernet-switch-port.yaml - dsa.yaml also references dsa-port.yaml - dsa-port.yaml references ethernet-switch-port.yaml because ethernet-switch-port.yaml will be referenced twice. Again, not sure if this is a problem. If it isn't, things can be simpler, just make dsa-port.yaml reference ethernet-switch-port.yaml, and skip steps 2 and 3 since dsa-port.yaml containing just the DSA specifics is no longer problematic. """ I might have been testing to see if this was necessary and since I didn't notice any dt_binding_check errors this might have slipped into the patch set. But my intent was to reference both here and remove the reference in dsa-port.yaml. > > Rob
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml index 10ad7e71097b..c5144e733511 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ethernet Switch port Device Tree Bindings +title: DSA Switch port Device Tree Bindings maintainers: - Andrew Lunn <andrew@lunn.ch> @@ -15,12 +15,9 @@ description: Ethernet switch port Description allOf: - - $ref: /schemas/net/ethernet-controller.yaml# + - $ref: /schemas/net/ethernet-switch-port.yaml# properties: - reg: - description: Port number - label: description: Describes the label associated with this port, which will become @@ -57,25 +54,6 @@ properties: - rtl8_4t - seville - phy-handle: true - - phy-mode: true - - fixed-link: true - - mac-address: true - - sfp: true - - managed: true - - rx-internal-delay-ps: true - - tx-internal-delay-ps: true - -required: - - reg - # CPU and DSA ports must have phylink-compatible link descriptions if: oneOf: diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml new file mode 100644 index 000000000000..cb1e5e12bf0a --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet Switch port Device Tree Bindings + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Vivien Didelot <vivien.didelot@gmail.com> + +description: + Ethernet switch port Description + +$ref: ethernet-controller.yaml# + +properties: + reg: + description: Port number + + phy-handle: true + + phy-mode: true + + fixed-link: true + + mac-address: true + + sfp: true + + managed: true + + rx-internal-delay-ps: true + + tx-internal-delay-ps: true + +required: + - reg + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index fbaac536673d..f698857619da 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -36,7 +36,9 @@ patternProperties: type: object description: Ethernet switch ports - $ref: /schemas/net/dsa/dsa-port.yaml# + allOf: + - $ref: /schemas/net/dsa/dsa-port.yaml# + - $ref: ethernet-switch-port.yaml# oneOf: - required: diff --git a/MAINTAINERS b/MAINTAINERS index 3b6c3989c419..d98fc1962874 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14326,6 +14326,7 @@ M: Florian Fainelli <f.fainelli@gmail.com> M: Vladimir Oltean <olteanv@gmail.com> S: Maintained F: Documentation/devicetree/bindings/net/dsa/ +F: Documentation/devicetree/bindings/net/ethernet-switch-port.yaml F: Documentation/devicetree/bindings/net/ethernet-switch.yaml F: drivers/net/dsa/ F: include/linux/dsa/
The dsa-port.yaml binding had several references that can be common to all ethernet ports, not just dsa-specific ones. Break out the generic bindings to ethernet-switch-port.yaml they can be used by non-dsa drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> --- .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +---------- .../bindings/net/ethernet-switch-port.yaml | 44 +++++++++++++++++++ .../bindings/net/ethernet-switch.yaml | 4 +- MAINTAINERS | 1 + 4 files changed, 50 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml