diff mbox series

[v2,4/4] pcmcia: Convert to use pci_bus_for_each_resource_p()

Message ID 20221103164644.70554-5-andriy.shevchenko@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series PCI: Add pci_dev_for_each_resource() helper and refactor bus one | expand

Commit Message

Andy Shevchenko Nov. 3, 2022, 4:46 p.m. UTC
The pci_bus_for_each_resource_p() hides the iterator loop since
it may be not used otherwise. With this, we may drop that iterator
variable definition.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pcmcia/rsrc_nonstatic.c | 9 +++------
 drivers/pcmcia/yenta_socket.c   | 3 +--
 2 files changed, 4 insertions(+), 8 deletions(-)

Comments

Dominik Brodowski Nov. 3, 2022, 5:03 p.m. UTC | #1
Am Thu, Nov 03, 2022 at 06:46:44PM +0200 schrieb Andy Shevchenko:
> The pci_bus_for_each_resource_p() hides the iterator loop since
> it may be not used otherwise. With this, we may drop that iterator
> variable definition.

Thanks for your patch!

> diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
> index ad1141fddb4c..9d92d4bb6239 100644
> --- a/drivers/pcmcia/rsrc_nonstatic.c
> +++ b/drivers/pcmcia/rsrc_nonstatic.c
> @@ -934,7 +934,7 @@ static int adjust_io(struct pcmcia_socket *s, unsigned int action, unsigned long
>  static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
>  {
>  	struct resource *res;
> -	int i, done = 0;
> +	int done = 0;
>  
>  	if (!s->cb_dev || !s->cb_dev->bus)
>  		return -ENODEV;
> @@ -960,12 +960,9 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
>  	 */
>  	if (s->cb_dev->bus->number == 0)
>  		return -EINVAL;
> -
> -	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
> -		res = s->cb_dev->bus->resource[i];
> -#else
> -	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
>  #endif
> +
> +	pci_bus_for_each_resource_p(s->cb_dev->bus, res) {
>  		if (!res)
>  			continue;

Doesn't this remove the proper iterator for X86? Even if that is the right
thing to do, it needs an explict explanation.

>  
> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
> index 3966a6ceb1ac..b200f2b99a7a 100644
> --- a/drivers/pcmcia/yenta_socket.c
> +++ b/drivers/pcmcia/yenta_socket.c
> @@ -673,9 +673,8 @@ static int yenta_search_res(struct yenta_socket *socket, struct resource *res,
>  			    u32 min)
>  {
>  	struct resource *root;
> -	int i;
>  
> -	pci_bus_for_each_resource(socket->dev->bus, root, i) {
> +	pci_bus_for_each_resource_p(socket->dev->bus, root) {
>  		if (!root)
>  			continue;
>  

That looks fine!

Thanks,
	Dominik
Andy Shevchenko Nov. 3, 2022, 5:12 p.m. UTC | #2
On Thu, Nov 03, 2022 at 06:03:24PM +0100, Dominik Brodowski wrote:
> Am Thu, Nov 03, 2022 at 06:46:44PM +0200 schrieb Andy Shevchenko:

...

> > -
> > -	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
> > -		res = s->cb_dev->bus->resource[i];
> > -#else
> > -	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
> >  #endif
> > +
> > +	pci_bus_for_each_resource_p(s->cb_dev->bus, res) {
> >  		if (!res)
> >  			continue;
> 
> Doesn't this remove the proper iterator for X86? Even if that is the right
> thing to do, it needs an explict explanation.

I dunno what was in 2010, but reading code now I have found no differences in
the logic on how resources are being iterated in these two pieces of code.

But fine, I will add a line to a commit message about this change.

Considering this is done, can you issue your conditional tag so I will
incorporate it in v3?
Dominik Brodowski Nov. 3, 2022, 5:25 p.m. UTC | #3
Am Thu, Nov 03, 2022 at 07:12:45PM +0200 schrieb Andy Shevchenko:
> On Thu, Nov 03, 2022 at 06:03:24PM +0100, Dominik Brodowski wrote:
> > Am Thu, Nov 03, 2022 at 06:46:44PM +0200 schrieb Andy Shevchenko:
> 
> ...
> 
> > > -
> > > -	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
> > > -		res = s->cb_dev->bus->resource[i];
> > > -#else
> > > -	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
> > >  #endif
> > > +
> > > +	pci_bus_for_each_resource_p(s->cb_dev->bus, res) {
> > >  		if (!res)
> > >  			continue;
> > 
> > Doesn't this remove the proper iterator for X86? Even if that is the right
> > thing to do, it needs an explict explanation.
> 
> I dunno what was in 2010, but reading code now I have found no differences in
> the logic on how resources are being iterated in these two pieces of code.
> 
> But fine, I will add a line to a commit message about this change.
> 
> Considering this is done, can you issue your conditional tag so I will
> incorporate it in v3?

Certainly, feel free to add

	Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>

Thanks,
	Dominik
Andy Shevchenko Nov. 3, 2022, 6:01 p.m. UTC | #4
On Thu, Nov 03, 2022 at 06:25:45PM +0100, Dominik Brodowski wrote:
> Am Thu, Nov 03, 2022 at 07:12:45PM +0200 schrieb Andy Shevchenko:
> > On Thu, Nov 03, 2022 at 06:03:24PM +0100, Dominik Brodowski wrote:

...

> > Considering this is done, can you issue your conditional tag so I will
> > incorporate it in v3?
> 
> Certainly, feel free to add
> 
> 	Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>

Thank you for the review!
Krzysztof Wilczyński Nov. 3, 2022, 6:29 p.m. UTC | #5
Hello,

[...]
> > > -
> > > -	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
> > > -		res = s->cb_dev->bus->resource[i];
> > > -#else
> > > -	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
> > >  #endif
> > > +
> > > +	pci_bus_for_each_resource_p(s->cb_dev->bus, res) {
> > >  		if (!res)
> > >  			continue;
> > 
> > Doesn't this remove the proper iterator for X86? Even if that is the right
> > thing to do, it needs an explict explanation.
> 
> I dunno what was in 2010, but reading code now I have found no differences in
> the logic on how resources are being iterated in these two pieces of code.

This code is over a decade old (13 years old to be precise) and there was
something odd between Bjorn's and Jesse's patches, as per:

  89a74ecccd1f ("PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs")
  cf26e8dc4194 ("pcmcia: do not autoadd root PCI bus resources")

> But fine, I will add a line to a commit message about this change.

I wouldn't, personally.  The change you are proposing is self-explanatory
and somewhat in-line with what is there already - unless I am also reading
the current implementation wrong.

That said, Dominik is the maintainer of PCMCIA driver, so his is the last
word, so to speak. :)

> Considering this is done, can you issue your conditional tag so I will
> incorporate it in v3?

No need, really.  Again, unless Dominik thinks otherwise.

	Krzysztof
Dominik Brodowski Nov. 3, 2022, 6:38 p.m. UTC | #6
Am Fri, Nov 04, 2022 at 03:29:44AM +0900 schrieb Krzysztof Wilczyński:
> Hello,
> 
> [...]
> > > > -
> > > > -	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
> > > > -		res = s->cb_dev->bus->resource[i];
> > > > -#else
> > > > -	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
> > > >  #endif
> > > > +
> > > > +	pci_bus_for_each_resource_p(s->cb_dev->bus, res) {
> > > >  		if (!res)
> > > >  			continue;
> > > 
> > > Doesn't this remove the proper iterator for X86? Even if that is the right
> > > thing to do, it needs an explict explanation.
> > 
> > I dunno what was in 2010, but reading code now I have found no differences in
> > the logic on how resources are being iterated in these two pieces of code.
> 
> This code is over a decade old (13 years old to be precise) and there was
> something odd between Bjorn's and Jesse's patches, as per:
> 
>   89a74ecccd1f ("PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs")
>   cf26e8dc4194 ("pcmcia: do not autoadd root PCI bus resources")
> 
> > But fine, I will add a line to a commit message about this change.
> 
> I wouldn't, personally.  The change you are proposing is self-explanatory
> and somewhat in-line with what is there already - unless I am also reading
> the current implementation wrong.
> 
> That said, Dominik is the maintainer of PCMCIA driver, so his is the last
> word, so to speak. :)
> 
> > Considering this is done, can you issue your conditional tag so I will
> > incorporate it in v3?
> 
> No need, really.  Again, unless Dominik thinks otherwise.

Ah, thanks for the correction. Then v2 is perfectly fine.

Thanks,
	Dominik
Andy Shevchenko Nov. 3, 2022, 6:59 p.m. UTC | #7
On Fri, Nov 04, 2022 at 03:29:44AM +0900, Krzysztof Wilczyński wrote:

> > > > -
> > > > -	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
> > > > -		res = s->cb_dev->bus->resource[i];
> > > > -#else
> > > > -	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
> > > >  #endif
> > > > +
> > > > +	pci_bus_for_each_resource_p(s->cb_dev->bus, res) {
> > > >  		if (!res)
> > > >  			continue;
> > > 
> > > Doesn't this remove the proper iterator for X86? Even if that is the right
> > > thing to do, it needs an explict explanation.
> > 
> > I dunno what was in 2010, but reading code now I have found no differences in
> > the logic on how resources are being iterated in these two pieces of code.
> 
> This code is over a decade old (13 years old to be precise) and there was
> something odd between Bjorn's and Jesse's patches, as per:
> 
>   89a74ecccd1f ("PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs")
>   cf26e8dc4194 ("pcmcia: do not autoadd root PCI bus resources")

Yeah, thanks for pointing out to the other patch from the same 2010 year.
It seems the code was completely identical that time, now it uses more
sophisticated way of getting bus resources, but it's kept the same for
the resources under PCI_BRIDGE_RESOURCE_NUM threshold.

> > But fine, I will add a line to a commit message about this change.
> 
> I wouldn't, personally.  The change you are proposing is self-explanatory
> and somewhat in-line with what is there already - unless I am also reading
> the current implementation wrong.

But it wouldn't be harmful either.

> That said, Dominik is the maintainer of PCMCIA driver, so his is the last
> word, so to speak. :)
> 
> > Considering this is done, can you issue your conditional tag so I will
> > incorporate it in v3?
> 
> No need, really.  Again, unless Dominik thinks otherwise.

I think that what is wanted to have to get his tag.

Thanks for review, both of you, guys!
Andy Shevchenko Nov. 3, 2022, 7:01 p.m. UTC | #8
On Thu, Nov 03, 2022 at 07:38:07PM +0100, Dominik Brodowski wrote:
> Am Fri, Nov 04, 2022 at 03:29:44AM +0900 schrieb Krzysztof Wilczyński:

...

> > That said, Dominik is the maintainer of PCMCIA driver, so his is the last
> > word, so to speak. :)
> > 
> > > Considering this is done, can you issue your conditional tag so I will
> > > incorporate it in v3?
> > 
> > No need, really.  Again, unless Dominik thinks otherwise.
> 
> Ah, thanks for the correction. Then v2 is perfectly fine.

I'm fine with either, thanks!
diff mbox series

Patch

diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index ad1141fddb4c..9d92d4bb6239 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -934,7 +934,7 @@  static int adjust_io(struct pcmcia_socket *s, unsigned int action, unsigned long
 static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
 {
 	struct resource *res;
-	int i, done = 0;
+	int done = 0;
 
 	if (!s->cb_dev || !s->cb_dev->bus)
 		return -ENODEV;
@@ -960,12 +960,9 @@  static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
 	 */
 	if (s->cb_dev->bus->number == 0)
 		return -EINVAL;
-
-	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
-		res = s->cb_dev->bus->resource[i];
-#else
-	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
 #endif
+
+	pci_bus_for_each_resource_p(s->cb_dev->bus, res) {
 		if (!res)
 			continue;
 
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 3966a6ceb1ac..b200f2b99a7a 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -673,9 +673,8 @@  static int yenta_search_res(struct yenta_socket *socket, struct resource *res,
 			    u32 min)
 {
 	struct resource *root;
-	int i;
 
-	pci_bus_for_each_resource(socket->dev->bus, root, i) {
+	pci_bus_for_each_resource_p(socket->dev->bus, root) {
 		if (!root)
 			continue;