| Message ID | 20221104123838.484205-1-andyshrk@163.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-bindings: rockchip: Add Rockchip rk3566 box demo board | expand |
On 04/11/2022 08:38, Andy Yan wrote: > This is a rk3566 tv box evaluation demo board. > > Specification: > - Rockchip RK3566 > - DDR4 4GB > - TF sd scard slot > - eMMC > - AP6398S for WiFi + BT > - Gigabit ethernet > - HDMI out > - USB HOST 2.0 x 2 > - USB 3.0 x 1 > - USB OTG 2.0 x 1 > - 12V DC Power supply > > Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> > Signed-off-by: Andy Yan <andyshrk@163.com> > --- > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3566-box-demo.dts | 509 ++++++++++++++++++ > 2 files changed, 510 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index 50942086490d..832613143030 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts > new file mode 100644 > index 000000000000..6a6b6851a357 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts > @@ -0,0 +1,509 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/* > + * Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com > + * Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include <dt-bindings/soc/rockchip,vop2.h> > +#include "rk3566.dtsi" > + > +/ { > + model = "Rockchip RK3566 BOX DEMO V10 Board"; > + compatible = "rockchip,rk3566-box-demo-v10", "rockchip,rk3566"; > + > + aliases { > + ethernet0 = &gmac1; > + mmc0 = &sdmmc0; > + mmc1 = &sdmmc1; > + mmc2 = &sdhci; > + }; > + > + chosen: chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + gmac1_clkin: external-gmac1-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "gmac1_clkin"; > + #clock-cells = <0>; > + }; > + > + hdmi-con { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > + ir-receiver { > + compatible = "gpio-ir-receiver"; > + gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; > + pinctrl-0 = <&ir_int>; > + linux,rc-map-name = "rc-beelink-gs1"; > + status = "okay"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led_work: led-0 { > + gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; > + function = LED_FUNCTION_HEARTBEAT; > + color = <LED_COLOR_ID_BLUE>; > + linux,default-trigger = "heartbeat"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led_work_en>; > + }; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + status = "okay"; > + compatible = "mmc-pwrseq-simple"; > + clocks = <&pmucru CLK_RTC_32K>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h &wifi_32k>; > + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; > + }; > + > + spdif_dit: spdif-dit { > + compatible = "linux,spdif-dit"; > + #sound-dai-cells = <0>; > + }; > + > + spdif_sound: spdif-sound { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "SPDIF"; > + > + simple-audio-card,cpu { > + sound-dai = <&spdif>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&spdif_dit>; > + }; > + }; > + > + dc_12v: dc_12v { No underscores in node names. Generic node names, so at least with regulator suffix or prefix. > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + vcc5v0_sys: vcc5v0-sys { Same here and in other places. > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc_12v>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&dc_12v>; > + }; > + > + vcc_3v3: vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_3v3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + vcc5v0_usb_host: vcc5v0-usb-host { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_usb_host_en>; > + regulator-name = "vcc5v0_usb_host"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_usb2_otg: vcc5v0-usb2-otg { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_usb2_otg_en>; > + regulator-name = "vcc5v0_usb_otg"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcca_1v8: vcca_1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "vcca_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + vdda_0v9: vdda_0v9 { > + compatible = "regulator-fixed"; > + regulator-name = "vdda_0v9"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + vdd_fixed: vdd-fixed { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_fixed"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <950000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vdd_cpu: vdd-cpu { > + compatible = "pwm-regulator"; > + pwms = <&pwm0 0 5000 1>; > + regulator-name = "vdd_cpu"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1200000>; > + regulator-init-microvolt = <950000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-settling-time-up-us = <250>; > + pwm-supply = <&vcc5v0_sys>; > + status = "okay"; Why only this is ok? > + }; > + > + vdd_logic: vdd-logic { > + compatible = "pwm-regulator"; > + pwms = <&pwm1 0 5000 1>; > + regulator-name = "vdd_logic"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1100000>; > + regulator-init-microvolt = <950000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-settling-time-up-us = <250>; > + pwm-supply = <&vcc5v0_sys>; > + status = "okay"; Drop. > + }; > +}; > + > +&combphy1 { > + status = "okay"; > +}; > + > +&combphy2 { > + status = "okay"; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&gmac1 { > + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; > + phy-mode = "rgmii"; > + clock_in_out = "input"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac1m1_miim > + &gmac1m1_tx_bus2 > + &gmac1m1_rx_bus2 > + &gmac1m1_rgmii_clk > + &gmac1m1_rgmii_bus > + &gmac1m1_clkinout>; > + snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + /* Reset time is 20ms, 100ms for rtl8211f */ > + snps,reset-delays-us = <0 20000 100000>; > + > + tx_delay = <0x4f>; > + rx_delay = <0x2d>; > + phy-handle = <&rgmii_phy1>; > + status = "okay"; > +}; > + > +&mdio1 { > + rgmii_phy1: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0x1>; > + }; > +}; > + > +&hdmi { > + assigned-clocks = <&cru CLK_HDMI_CEC>; > + assigned-clock-rates = <32768>; > + avdd-0v9-supply = <&vdda_0v9>; > + avdd-1v8-supply = <&vcca_1v8>; > + status = "okay"; > +}; > + > +&hdmi_in { > + hdmi_in_vp0: endpoint { > + remote-endpoint = <&vp0_out_hdmi>; > + }; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > +}; > + > +&i2s0_8ch { > + status = "okay"; > +}; > + > +&i2s1_8ch { > + rockchip,trcm-sync-tx-only; > + status = "okay"; > +}; > + > +&pinctrl { > + bt { > + bt_enable_h: bt-enable-h { > + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_host_wake_l: bt-host-wake-l { > + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + bt_wake_l: bt-wake-l { > + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + sdio-pwrseq { > + wifi_enable_h: wifi-enable-h { > + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + wifi_32k: wifi-32k { > + rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>; > + }; > + }; > + > + usb { > + vcc5v0_usb_host_en: vcc5v0_usb_host_en { No underscores in node names. > + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en { > + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + }; > + > + ir { > + ir_int: ir-int { > + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + led { > + led_work_en: led_work_en { > + rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + No need for blank line. > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs200-1_8v; > + non-removable; > + status = "okay"; > +}; > + > +&sdmmc0 { > + bus-width = <4>; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > + vmmc-supply = <&vcc_3v3>; > + status = "okay"; > +}; > + > +&sdmmc1 { > + bus-width = <4>; > + cap-sd-highspeed; > + disable-wp; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vcca_1v8>; > + status = "okay"; > +}; > + > +&spdif { > + status = "okay"; > +}; > + > +&spi1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <0>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; > + status = "okay"; > + uart-has-rtscts; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + clocks = <&pmucru CLK_RTC_32K>; > + clock-names = "ext_clock"; > + device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > + host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; > + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; > + vbat-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcca_1v8>; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&vop { > + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > + status = "okay"; > +}; > + > +&vop_mmu { > + status = "okay"; > +}; > + > +&vp0 { > + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { > + reg = <ROCKCHIP_VOP2_EP_HDMI0>; > + remote-endpoint = <&hdmi_in_vp0>; > + }; > +}; > + > +&vpu { > + status = "okay"; > +}; > + > +&vdpu_mmu { > + status = "okay"; > +}; > + > +&usb2phy0_host { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&usb2phy0_otg { > + vbus-supply = <&vcc5v0_usb2_otg>; > + status = "okay"; > +}; > + > +&usb2phy1_host { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&usb2phy1_otg { > + phy-supply = <&vcc5v0_usb_host>; > + status = "okay"; > +}; > + > +&usb2phy1 { > + status = "okay"; > +}; > + > + Only one blank line Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 50942086490d..832613143030 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts new file mode 100644 index 000000000000..6a6b6851a357 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts @@ -0,0 +1,509 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com + * Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "Rockchip RK3566 BOX DEMO V10 Board"; + compatible = "rockchip,rk3566-box-demo-v10", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + linux,rc-map-name = "rc-beelink-gs1"; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + led_work: led-0 { + gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_work_en>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&pmucru CLK_RTC_32K>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h &wifi_32k>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; + + spdif_dit: spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; + }; + + dc_12v: dc_12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc_3v3: vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb2_otg: vcc5v0-usb2-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb2_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcca_1v8: vcca_1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + vdda_0v9: vdda_0v9 { + compatible = "regulator-fixed"; + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + vdd_fixed: vdd-fixed { + compatible = "regulator-fixed"; + regulator-name = "vdd_fixed"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_cpu: vdd-cpu { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-init-microvolt = <950000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + pwm-supply = <&vcc5v0_sys>; + status = "okay"; + }; + + vdd_logic: vdd-logic { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 5000 1>; + regulator-name = "vdd_logic"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-init-microvolt = <950000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + pwm-supply = <&vcc5v0_sys>; + status = "okay"; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; + phy-mode = "rgmii"; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus + &gmac1m1_clkinout>; + snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + + tx_delay = <0x4f>; + rx_delay = <0x2d>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + }; +}; + +&hdmi { + assigned-clocks = <&cru CLK_HDMI_CEC>; + assigned-clock-rates = <32768>; + avdd-0v9-supply = <&vdda_0v9>; + avdd-1v8-supply = <&vcca_1v8>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_32k: wifi-32k { + rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + + ir { + ir_int: ir-int { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + led { + led_work_en: led_work_en { + rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcca_1v8>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&pmucru CLK_RTC_32K>; + clock-names = "ext_clock"; + device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vpu { + status = "okay"; +}; + +&vdpu_mmu { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + vbus-supply = <&vcc5v0_usb2_otg>; + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +};