@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Ethernet Switch port Device Tree Bindings
+title: Generic DSA Switch port
maintainers:
- Andrew Lunn <andrew@lunn.ch>
@@ -14,8 +14,7 @@ maintainers:
description:
Ethernet switch port Description
-allOf:
- - $ref: /schemas/net/ethernet-controller.yaml#
+$ref: /schemas/net/ethernet-switch-port.yaml#
properties:
reg:
@@ -58,25 +57,6 @@ properties:
- rtl8_4t
- seville
- phy-handle: true
-
- phy-mode: true
-
- fixed-link: true
-
- mac-address: true
-
- sfp: true
-
- managed: true
-
- rx-internal-delay-ps: true
-
- tx-internal-delay-ps: true
-
-required:
- - reg
-
# CPU and DSA ports must have phylink-compatible link descriptions
if:
oneOf:
new file mode 100644
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch port
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Vivien Didelot <vivien.didelot@gmail.com>
+
+description:
+ Ethernet switch port Description
+
+$ref: ethernet-controller.yaml#
+
+properties:
+ reg:
+ description: Port number
+
+additionalProperties: true
+
+...
@@ -40,8 +40,6 @@ patternProperties:
type: object
description: Ethernet switch ports
- $ref: ethernet-controller.yaml#
-
oneOf:
- required:
- ports
@@ -58,7 +56,7 @@ $defs:
patternProperties:
"^(ethernet-)?port@[0-9]+$":
description: Ethernet switch ports
- $ref: ethernet-controller.yaml#
+ $ref: ethernet-switch-port.yaml#
unevaluatedProperties: false
...
@@ -14332,6 +14332,7 @@ M: Florian Fainelli <f.fainelli@gmail.com>
M: Vladimir Oltean <olteanv@gmail.com>
S: Maintained
F: Documentation/devicetree/bindings/net/dsa/
+F: Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
F: Documentation/devicetree/bindings/net/ethernet-switch.yaml
F: drivers/net/dsa/
F: include/linux/dsa/
The dsa-port.yaml binding had several references that can be common to all ethernet ports, not just dsa-specific ones. Break out the generic bindings to ethernet-switch-port.yaml they can be used by non-dsa drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> --- v2 -> v3 * Change dsa-port title from "DSA Switch port Device Tree Bindings" to "Generic DSA Switch port" * Add reference to ethernet-switch-port.yaml# in dsa-port.yaml * Change title of ethernet-switch-port.yaml from "Ethernet Switch port Device Tree Bindings" to "Generic Ethernet Switch port" * Remove most properties from ethernet-switch-port.yaml. They're all in ethernet-controller, and are all allowed. * ethernet-switch.yaml now only references ethernet-switch-port.yaml# under the port node. v1 -> v2 * Remove accidental addition of "$ref: /schemas/net/ethernet-switch-port.yaml" which should be kept out of dsa-port so that it doesn't get referenced multiple times through both ethernet-switch and dsa-port. --- .../devicetree/bindings/net/dsa/dsa-port.yaml | 24 ++---------------- .../bindings/net/ethernet-switch-port.yaml | 25 +++++++++++++++++++ .../bindings/net/ethernet-switch.yaml | 4 +-- MAINTAINERS | 1 + 4 files changed, 29 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml