| Message ID | 20221220101249.46450-1-b-kapoor@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ti: k3-j721s2: Add support for ADC nodes | expand |
On 20/12/2022 11:12, Bhavya Kapoor wrote: > J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes > for 8 channel ADCs for J721s2 SoC. > > Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> > --- > .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ > .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- > 2 files changed, 55 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts > index a7aa6cf08acd..67593aa69327 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts > @@ -309,3 +309,17 @@ &mcu_mcan1 { > pinctrl-0 = <&mcu_mcan1_pins_default>; > phys = <&transceiver2>; > }; > + > +&tscadc0 { > + status = "okay"; > + adc { > + ti,adc-channels = <0 1 2 3 4 5 6 7>; > + }; > +}; > + > +&tscadc1 { > + status = "okay"; > + adc { > + ti,adc-channels = <0 1 2 3 4 5 6 7>; > + }; > +}; > \ No newline at end of file This is a friendly reminder during the review process. It seems my previous comments were not fully addressed. Maybe my feedback got lost between the quotes, maybe you just forgot to apply it. Please go back to the previous discussion and either implement all requested changes or keep discussing them. Thank you. Best regards, Krzysztof
On 20/12/22 16:20, Krzysztof Kozlowski wrote: > On 20/12/2022 11:12, Bhavya Kapoor wrote: >> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >> for 8 channel ADCs for J721s2 SoC. >> >> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >> --- >> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- >> 2 files changed, 55 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> index a7aa6cf08acd..67593aa69327 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> @@ -309,3 +309,17 @@ &mcu_mcan1 { >> pinctrl-0 = <&mcu_mcan1_pins_default>; >> phys = <&transceiver2>; >> }; >> + >> +&tscadc0 { >> + status = "okay"; >> + adc { >> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >> + }; >> +}; >> + >> +&tscadc1 { >> + status = "okay"; >> + adc { >> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >> + }; >> +}; >> \ No newline at end of file > This is a friendly reminder during the review process. > > It seems my previous comments were not fully addressed. Maybe my > feedback got lost between the quotes, maybe you just forgot to apply it. > Please go back to the previous discussion and either implement all > requested changes or keep discussing them. > > Thank you. > > Best regards, > Krzysztof Hi , I thought i did addressed the feedback since tscadc is just a wrapper node. The actual adc node is inside of tscadc node.
On 21/12/2022 06:42, Bhavya Kapoor wrote: > > On 20/12/22 16:20, Krzysztof Kozlowski wrote: >> On 20/12/2022 11:12, Bhavya Kapoor wrote: >>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >>> for 8 channel ADCs for J721s2 SoC. >>> >>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >>> --- >>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- >>> 2 files changed, 55 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>> index a7aa6cf08acd..67593aa69327 100644 >>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>> @@ -309,3 +309,17 @@ &mcu_mcan1 { >>> pinctrl-0 = <&mcu_mcan1_pins_default>; >>> phys = <&transceiver2>; >>> }; >>> + >>> +&tscadc0 { >>> + status = "okay"; >>> + adc { >>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>> + }; >>> +}; >>> + >>> +&tscadc1 { >>> + status = "okay"; >>> + adc { >>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>> + }; >>> +}; >>> \ No newline at end of file >> This is a friendly reminder during the review process. >> >> It seems my previous comments were not fully addressed. Maybe my >> feedback got lost between the quotes, maybe you just forgot to apply it. >> Please go back to the previous discussion and either implement all >> requested changes or keep discussing them. >> >> Thank you. >> >> Best regards, >> Krzysztof > > Hi , I thought i did addressed the feedback since tscadc is just a > wrapper node. > > The actual adc node is inside of tscadc node. Read the feedback, from all emails. Best regards, Krzysztof
On 21/12/22 13:24, Krzysztof Kozlowski wrote: > On 21/12/2022 06:42, Bhavya Kapoor wrote: >> On 20/12/22 16:20, Krzysztof Kozlowski wrote: >>> On 20/12/2022 11:12, Bhavya Kapoor wrote: >>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >>>> for 8 channel ADCs for J721s2 SoC. >>>> >>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >>>> --- >>>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >>>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- >>>> 2 files changed, 55 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>> index a7aa6cf08acd..67593aa69327 100644 >>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>> @@ -309,3 +309,17 @@ &mcu_mcan1 { >>>> pinctrl-0 = <&mcu_mcan1_pins_default>; >>>> phys = <&transceiver2>; >>>> }; >>>> + >>>> +&tscadc0 { >>>> + status = "okay"; >>>> + adc { >>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>> + }; >>>> +}; >>>> + >>>> +&tscadc1 { >>>> + status = "okay"; >>>> + adc { >>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>> + }; >>>> +}; >>>> \ No newline at end of file >>> This is a friendly reminder during the review process. >>> >>> It seems my previous comments were not fully addressed. Maybe my >>> feedback got lost between the quotes, maybe you just forgot to apply it. >>> Please go back to the previous discussion and either implement all >>> requested changes or keep discussing them. >>> >>> Thank you. >>> >>> Best regards, >>> Krzysztof >> Hi , I thought i did addressed the feedback since tscadc is just a >> wrapper node. >> >> The actual adc node is inside of tscadc node. > Read the feedback, from all emails. > Best regards, > Krzysztof Hi , i have gone through all earlier mails but can't find anything else. Can you point out again whats the issue. Regards
On 22/12/2022 11:39, Bhavya Kapoor wrote: > > On 21/12/22 13:24, Krzysztof Kozlowski wrote: >> On 21/12/2022 06:42, Bhavya Kapoor wrote: >>> On 20/12/22 16:20, Krzysztof Kozlowski wrote: >>>> On 20/12/2022 11:12, Bhavya Kapoor wrote: >>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >>>>> for 8 channel ADCs for J721s2 SoC. >>>>> >>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >>>>> --- >>>>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >>>>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- >>>>> 2 files changed, 55 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>> index a7aa6cf08acd..67593aa69327 100644 >>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 { >>>>> pinctrl-0 = <&mcu_mcan1_pins_default>; >>>>> phys = <&transceiver2>; >>>>> }; >>>>> + >>>>> +&tscadc0 { >>>>> + status = "okay"; >>>>> + adc { >>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>> + }; >>>>> +}; >>>>> + >>>>> +&tscadc1 { >>>>> + status = "okay"; >>>>> + adc { >>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>> + }; >>>>> +}; >>>>> \ No newline at end of file >>>> This is a friendly reminder during the review process. >>>> >>>> It seems my previous comments were not fully addressed. Maybe my >>>> feedback got lost between the quotes, maybe you just forgot to apply it. >>>> Please go back to the previous discussion and either implement all >>>> requested changes or keep discussing them. >>>> >>>> Thank you. >>>> >>>> Best regards, >>>> Krzysztof >>> Hi , I thought i did addressed the feedback since tscadc is just a >>> wrapper node. >>> >>> The actual adc node is inside of tscadc node. >> Read the feedback, from all emails. >> Best regards, >> Krzysztof > > > Hi , i have gone through all earlier mails but can't find anything else. > Can you point out again whats the issue. "And this is a v2? Or resend? Or something else?" You miss proper versioning and changelog. Additionally - I commented just before error in your patch. You must fix it, not ignore it, even though I did not point it out before. Best regards, Krzysztof
On 22/12/22 16:16, Krzysztof Kozlowski wrote: > On 22/12/2022 11:39, Bhavya Kapoor wrote: >> On 21/12/22 13:24, Krzysztof Kozlowski wrote: >>> On 21/12/2022 06:42, Bhavya Kapoor wrote: >>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote: >>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote: >>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >>>>>> for 8 channel ADCs for J721s2 SoC. >>>>>> >>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >>>>>> --- >>>>>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >>>>>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- >>>>>> 2 files changed, 55 insertions(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>> index a7aa6cf08acd..67593aa69327 100644 >>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 { >>>>>> pinctrl-0 = <&mcu_mcan1_pins_default>; >>>>>> phys = <&transceiver2>; >>>>>> }; >>>>>> + >>>>>> +&tscadc0 { >>>>>> + status = "okay"; >>>>>> + adc { >>>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>>> + }; >>>>>> +}; >>>>>> + >>>>>> +&tscadc1 { >>>>>> + status = "okay"; >>>>>> + adc { >>>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>>> + }; >>>>>> +}; >>>>>> \ No newline at end of file >>>>> This is a friendly reminder during the review process. >>>>> >>>>> It seems my previous comments were not fully addressed. Maybe my >>>>> feedback got lost between the quotes, maybe you just forgot to apply it. >>>>> Please go back to the previous discussion and either implement all >>>>> requested changes or keep discussing them. >>>>> >>>>> Thank you. >>>>> >>>>> Best regards, >>>>> Krzysztof >>>> Hi , I thought i did addressed the feedback since tscadc is just a >>>> wrapper node. >>>> >>>> The actual adc node is inside of tscadc node. >>> Read the feedback, from all emails. >>> Best regards, >>> Krzysztof >> >> Hi , i have gone through all earlier mails but can't find anything else. >> Can you point out again whats the issue. > "And this is a v2? Or resend? Or something else?" > > You miss proper versioning and changelog. > > Additionally - I commented just before error in your patch. You must fix > it, not ignore it, even though I did not point it out before. > > Best regards, > Krzysztof Hi, i had replied to that as well earlier. You can check that out https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ . Maybe you missed out on that. Regards
On 22/12/2022 12:53, Bhavya Kapoor wrote: > > On 22/12/22 16:16, Krzysztof Kozlowski wrote: >> On 22/12/2022 11:39, Bhavya Kapoor wrote: >>> On 21/12/22 13:24, Krzysztof Kozlowski wrote: >>>> On 21/12/2022 06:42, Bhavya Kapoor wrote: >>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote: >>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote: >>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >>>>>>> for 8 channel ADCs for J721s2 SoC. >>>>>>> >>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >>>>>>> --- >>>>>>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >>>>>>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- >>>>>>> 2 files changed, 55 insertions(+), 1 deletion(-) >>>>>>> >>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>>> index a7aa6cf08acd..67593aa69327 100644 >>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 { >>>>>>> pinctrl-0 = <&mcu_mcan1_pins_default>; >>>>>>> phys = <&transceiver2>; >>>>>>> }; >>>>>>> + >>>>>>> +&tscadc0 { >>>>>>> + status = "okay"; >>>>>>> + adc { >>>>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>>>> + }; >>>>>>> +}; >>>>>>> + >>>>>>> +&tscadc1 { >>>>>>> + status = "okay"; >>>>>>> + adc { >>>>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>>>> + }; >>>>>>> +}; >>>>>>> \ No newline at end of file >>>>>> This is a friendly reminder during the review process. >>>>>> >>>>>> It seems my previous comments were not fully addressed. Maybe my >>>>>> feedback got lost between the quotes, maybe you just forgot to apply it. >>>>>> Please go back to the previous discussion and either implement all >>>>>> requested changes or keep discussing them. >>>>>> >>>>>> Thank you. >>>>>> >>>>>> Best regards, >>>>>> Krzysztof >>>>> Hi , I thought i did addressed the feedback since tscadc is just a >>>>> wrapper node. >>>>> >>>>> The actual adc node is inside of tscadc node. >>>> Read the feedback, from all emails. >>>> Best regards, >>>> Krzysztof >>> >>> Hi , i have gone through all earlier mails but can't find anything else. >>> Can you point out again whats the issue. >> "And this is a v2? Or resend? Or something else?" >> >> You miss proper versioning and changelog. >> >> Additionally - I commented just before error in your patch. You must fix >> it, not ignore it, even though I did not point it out before. >> >> Best regards, >> Krzysztof > > Hi, i had replied to that as well earlier. You can check that out > https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ . > > Maybe you missed out on that. So this is a duplicate? OK, then this patch can be: NAK Best regards, Krzysztof
On 22/12/2022 12:53, Bhavya Kapoor wrote: > > On 22/12/22 16:16, Krzysztof Kozlowski wrote: >> On 22/12/2022 11:39, Bhavya Kapoor wrote: >>> On 21/12/22 13:24, Krzysztof Kozlowski wrote: >>>> On 21/12/2022 06:42, Bhavya Kapoor wrote: >>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote: >>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote: >>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >>>>>>> for 8 channel ADCs for J721s2 SoC. >>>>>>> >>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >>>>>>> --- >>>>>>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >>>>>>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- >>>>>>> 2 files changed, 55 insertions(+), 1 deletion(-) >>>>>>> >>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>>> index a7aa6cf08acd..67593aa69327 100644 >>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 { >>>>>>> pinctrl-0 = <&mcu_mcan1_pins_default>; >>>>>>> phys = <&transceiver2>; >>>>>>> }; >>>>>>> + >>>>>>> +&tscadc0 { >>>>>>> + status = "okay"; >>>>>>> + adc { >>>>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>>>> + }; >>>>>>> +}; >>>>>>> + >>>>>>> +&tscadc1 { >>>>>>> + status = "okay"; >>>>>>> + adc { >>>>>>> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >>>>>>> + }; >>>>>>> +}; >>>>>>> \ No newline at end of file >>>>>> This is a friendly reminder during the review process. >>>>>> >>>>>> It seems my previous comments were not fully addressed. Maybe my >>>>>> feedback got lost between the quotes, maybe you just forgot to apply it. >>>>>> Please go back to the previous discussion and either implement all >>>>>> requested changes or keep discussing them. >>>>>> >>>>>> Thank you. >>>>>> >>>>>> Best regards, >>>>>> Krzysztof >>>>> Hi , I thought i did addressed the feedback since tscadc is just a >>>>> wrapper node. >>>>> >>>>> The actual adc node is inside of tscadc node. >>>> Read the feedback, from all emails. >>>> Best regards, >>>> Krzysztof >>> >>> Hi , i have gone through all earlier mails but can't find anything else. >>> Can you point out again whats the issue. >> "And this is a v2? Or resend? Or something else?" >> >> You miss proper versioning and changelog. >> >> Additionally - I commented just before error in your patch. You must fix >> it, not ignore it, even though I did not point it out before. >> >> Best regards, >> Krzysztof > > Hi, i had replied to that as well earlier. You can check that out > https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ . BTW, there is nothing there about the patch error I wrote here. If not, please point me to the quote which addresses this patch error. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a7aa6cf08acd..67593aa69327 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -309,3 +309,17 @@ &mcu_mcan1 { pinctrl-0 = <&mcu_mcan1_pins_default>; phys = <&transceiver2>; }; + +&tscadc0 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 0af242aa9816..ad1bc31619c4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -306,4 +306,44 @@ cpts@3d000 { ti,cpts-periodic-outputs = <2>; }; }; -}; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x40200000 0x0 0x1000>; + interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x40210000 0x0 0x1000>; + interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 0>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + }; \ No newline at end of file
J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes for 8 channel ADCs for J721s2 SoC. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> --- .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 42 ++++++++++++++++++- 2 files changed, 55 insertions(+), 1 deletion(-)