diff mbox series

[v2,1/6] dt-bindings: crypto: Let STM32 define Ux500 HASH

Message ID 20221227-ux500-stm32-hash-v2-1-bc443bc44ca4@linaro.org (mailing list archive)
State New, archived
Headers show
Series crypto: stm32 hash - reuse for Ux500 | expand

Commit Message

Linus Walleij Jan. 10, 2023, 7:19 p.m. UTC
This adds device tree bindings for the Ux500 HASH block
as a compatible in the STM32 HASH bindings.

The Ux500 HASH binding has been used for ages in the kernel
device tree for Ux500 but was never documented, so fill in
the gap by making it a sibling of the STM32 HASH block,
which is what it is.

The relationship to the existing STM32 HASH block is pretty
obvious when looking at the register map, and I have written
patches to reuse the STM32 HASH driver on the Ux500.

The main difference from the outside is that the Ux500 HASH
lacks the interrupt line, so some special if-clauses are
needed to accomodate this in the binding.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Use an else construction instead of if/if not.
---
 .../devicetree/bindings/crypto/st,stm32-hash.yaml  | 23 +++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) Jan. 13, 2023, 1:30 a.m. UTC | #1
On Tue, 10 Jan 2023 20:19:12 +0100, Linus Walleij wrote:
> This adds device tree bindings for the Ux500 HASH block
> as a compatible in the STM32 HASH bindings.
> 
> The Ux500 HASH binding has been used for ages in the kernel
> device tree for Ux500 but was never documented, so fill in
> the gap by making it a sibling of the STM32 HASH block,
> which is what it is.
> 
> The relationship to the existing STM32 HASH block is pretty
> obvious when looking at the register map, and I have written
> patches to reuse the STM32 HASH driver on the Ux500.
> 
> The main difference from the outside is that the Ux500 HASH
> lacks the interrupt line, so some special if-clauses are
> needed to accomodate this in the binding.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Use an else construction instead of if/if not.
> ---
>  .../devicetree/bindings/crypto/st,stm32-hash.yaml  | 23 +++++++++++++++++++++-
>  1 file changed, 22 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 4ccb335e8063..b767ec72a999 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -6,12 +6,18 @@  $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: STMicroelectronics STM32 HASH
 
+description: The STM32 HASH block is built on the HASH block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
+
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
     enum:
+      - st,stn8820-hash
+      - stericsson,ux500-hash
       - st,stm32f456-hash
       - st,stm32f756-hash
 
@@ -41,11 +47,26 @@  properties:
     maximum: 2
     default: 0
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - clocks
-  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          items:
+            const: stericsson,ux500-hash
+    then:
+      properties:
+        interrupts: false
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false