| Message ID | 20221230000139.2846763-9-sean.anderson@seco.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | phy: Add support for Lynx 10G SerDes | expand |
On Thu, Dec 29, 2022 at 07:01:37PM -0500, Sean Anderson wrote: > This adds bindings for the SerDes devices. They are disabled by default > to prevent any breakage on existing boards. > > Signed-off-by: Sean Anderson <sean.anderson@seco.com> > --- > > (no changes since v4) > > Changes in v4: > - Convert to new bindings > > Changes in v3: > - New > > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > index 260d045dbd9a..ecf9d830e36f 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > @@ -238,6 +238,24 @@ reset: syscon@1e60000 { > reg = <0x0 0x1e60000 0x0 0x10000>; > }; > > + serdes1: serdes@1ea0000 { > + #address-cells = <1>; > + #size-cells = <0>; > + #clock-cells = <1>; > + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g"; > + reg = <0x0 0x1ea0000 0x0 0x2000>; Can we start the properties with compatible (and reg) like most of other device nodes? Shawn > + status = "disabled"; > + }; > + > + serdes2: serdes@1eb0000 { > + #address-cells = <1>; > + #size-cells = <0>; > + #clock-cells = <1>; > + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g"; > + reg = <0x0 0x1eb0000 0x0 0x2000>; > + status = "disabled"; > + }; > + > isc: syscon@1f70000 { > compatible = "fsl,ls1088a-isc", "syscon"; > reg = <0x0 0x1f70000 0x0 0x10000>; > -- > 2.35.1.1320.gc452695387.dirty >
On 1/25/23 18:48, Shawn Guo wrote: > On Thu, Dec 29, 2022 at 07:01:37PM -0500, Sean Anderson wrote: >> This adds bindings for the SerDes devices. They are disabled by default >> to prevent any breakage on existing boards. >> >> Signed-off-by: Sean Anderson <sean.anderson@seco.com> >> --- >> >> (no changes since v4) >> >> Changes in v4: >> - Convert to new bindings >> >> Changes in v3: >> - New >> >> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi >> index 260d045dbd9a..ecf9d830e36f 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi >> @@ -238,6 +238,24 @@ reset: syscon@1e60000 { >> reg = <0x0 0x1e60000 0x0 0x10000>; >> }; >> >> + serdes1: serdes@1ea0000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + #clock-cells = <1>; >> + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g"; >> + reg = <0x0 0x1ea0000 0x0 0x2000>; > > Can we start the properties with compatible (and reg) like most of other > device nodes? Sure. --Sean >> + status = "disabled"; >> + }; >> + >> + serdes2: serdes@1eb0000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + #clock-cells = <1>; >> + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g"; >> + reg = <0x0 0x1eb0000 0x0 0x2000>; >> + status = "disabled"; >> + }; >> + >> isc: syscon@1f70000 { >> compatible = "fsl,ls1088a-isc", "syscon"; >> reg = <0x0 0x1f70000 0x0 0x10000>; >> -- >> 2.35.1.1320.gc452695387.dirty >>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 260d045dbd9a..ecf9d830e36f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -238,6 +238,24 @@ reset: syscon@1e60000 { reg = <0x0 0x1e60000 0x0 0x10000>; }; + serdes1: serdes@1ea0000 { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g"; + reg = <0x0 0x1ea0000 0x0 0x2000>; + status = "disabled"; + }; + + serdes2: serdes@1eb0000 { + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g"; + reg = <0x0 0x1eb0000 0x0 0x2000>; + status = "disabled"; + }; + isc: syscon@1f70000 { compatible = "fsl,ls1088a-isc", "syscon"; reg = <0x0 0x1f70000 0x0 0x10000>;
This adds bindings for the SerDes devices. They are disabled by default to prevent any breakage on existing boards. Signed-off-by: Sean Anderson <sean.anderson@seco.com> --- (no changes since v4) Changes in v4: - Convert to new bindings Changes in v3: - New arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)