diff mbox series

[RESEND,v7,5/5] riscv: dts: allwinner: d1: Add RGB LEDs to boards

Message ID 20221231235541.13568-6-samuel@sholland.org (mailing list archive)
State New, archived
Headers show
Series leds: Allwinner A100 LED controller support | expand

Commit Message

Samuel Holland Dec. 31, 2022, 11:55 p.m. UTC 
Some D1-based boards feature an onboard RGB LED. Enable them.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v5)

Changes in v5:
 - New patch for v5

 .../boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts | 12 ++++++++++++
 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts   | 13 +++++++++++++
 2 files changed, 25 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
index 52b91e1affed..7efcec906a71 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
@@ -59,6 +59,18 @@  &ehci1 {
 	status = "okay";
 };
 
+&ledc {
+	pinctrl-0 = <&ledc_pc0_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	multi-led@0 {
+		reg = <0x0>;
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+	};
+};
+
 &mmc1 {
 	bus-width = <4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
index a0769185be97..2e5be1bbb00f 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
@@ -3,6 +3,7 @@ 
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 /dts-v1/;
 
@@ -93,6 +94,18 @@  pcf8574a: gpio@38 {
 	};
 };
 
+&ledc {
+	pinctrl-0 = <&ledc_pc0_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	multi-led@0 {
+		reg = <0x0>;
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";