diff mbox series

[01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller

Message ID 20230106132951.392271-2-herve.codina@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Add the PowerQUICC audio support using the QMC | expand

Commit Message

Herve Codina Jan. 6, 2023, 1:29 p.m. UTC
Add support for the time slot assigner (TSA)
available in some PowerQUICC SoC such as MPC885
or MPC866.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml      | 262 ++++++++++++++++++
 include/dt-bindings/soc/fsl-tsa.h             |  15 +
 2 files changed, 277 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
 create mode 100644 include/dt-bindings/soc/fsl-tsa.h
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
new file mode 100644
index 000000000000..7542c0fd8435
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
@@ -0,0 +1,262 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM Time-slot assigner (TSA) controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description: |
+  The TSA is the time-slot assigner that can be found on some
+  PowerQUICC SoC.
+  Its purpose is to route some TDM time-slots to other internal
+  serial controllers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc885-tsa
+          - fsl,mpc866-tsa
+      - const: fsl,cpm1-tsa
+
+  reg:
+    items:
+      - description: SI (Serial Interface) register base
+      - description: SI RAM base
+
+  reg-names:
+    items:
+      - const: si_regs
+      - const: si_ram
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^tdm@[0-1]$":
+    description:
+      The TDM managed by this controller
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+        description:
+          The TDM number for this TDM, 0 for TDMa and 1 for TDMb
+
+      fsl,common-rxtx-pins:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Use common pins for both transmit and receive
+
+      clocks: true
+      clock-names: true
+
+      fsl,mode:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [normal, echo, internal-loopback, control-loopback]
+        default: normal
+        description: |
+          Operational mode:
+            - normal:
+                Normal operation
+            - echo:
+                Automatic echo. Rx data is resent on Tx
+            - internal-loopback:
+                The TDM transmitter is connected to the receiver.
+                Data appears on Tx pin.
+            - control-loopback:
+                The TDM transmitter is connected to the receiver.
+                The Tx pin is disconnected.
+
+      fsl,rx-frame-sync-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Receive frame sync delay.
+          Indicates the delay between the Rx sync and the first bit of the
+          Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,tx-frame-sync-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Transmit frame sync delay.
+          Indicates the delay between the Tx sync and the first bit of the
+          Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,clock-falling-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Data is sent on falling edge of the clock (and received on the
+          rising edge).
+          If 'clock-falling-edge' is not present, data is sent on the
+          rising edge (and received on the falling edge).
+
+      fsl,fsync-rising-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Frame sync pulses are sampled with the rising edge of the channel
+          clock. If 'fsync-rising-edge' is not present, pulses are sample
+          with e falling edge.
+
+      fsl,double-speed-clock:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The channel clock is twice the data rate.
+
+      fsl,grant-mode:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Grant mode enabled.
+
+      tx_ts_routes:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          A list of tupple that indicates the Tx time-slots routes.
+            tx_ts_routes =
+               < 2 0 0>, /* The first 2 time slots are not used */
+               < 3 1 0>, /* The next 3 ones are route to SCC2 */
+               < 4 0 0>, /* The next 4 ones are not used */
+               < 2 2 0>; /* The nest 2 ones are route to SCC3 */
+        items:
+          items:
+            - description:
+                The number of time-slots
+              minimum: 1
+              maximum: 64
+            - description: |
+                The source serial interface (dt-bindings/soc/fsl-tsa.h
+                defines these values)
+                 - 0: No destination
+                 - 1: SCC2
+                 - 2: SCC3
+                 - 3: SCC4
+                 - 4: SMC1
+                 - 5: SMC2
+              enum: [0, 1, 2, 3, 4, 5]
+            - description:
+                The route flags (reserved)
+              const: 0
+        minItems: 1
+        maxItems: 64
+
+      rx_ts_routes:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          A list of tupple that indicates the Rx time-slots routes.
+            tx_ts_routes =
+               < 2 0 0>, /* The first 2 time slots are not used */
+               < 3 1 0>, /* The next 3 ones are route from SCC2 */
+               < 4 0 0>, /* The next 4 ones are not used */
+               < 2 2 0>; /* The nest 2 ones are route from SCC3 */
+        items:
+          items:
+            - description:
+                The number of time-slots
+              minimum: 1
+              maximum: 64
+            - description: |
+                The destination serial interface (dt-bindings/soc/fsl-tsa.h
+                defines these values)
+                 - 0: No destination
+                 - 1: SCC2
+                 - 2: SCC3
+                 - 3: SCC4
+                 - 4: SMC1
+                 - 5: SMC2
+              enum: [0, 1, 2, 3, 4, 5]
+            - description:
+                The route flags (reserved)
+              const: 0
+        minItems: 1
+        maxItems: 64
+
+    allOf:
+      - if:
+          properties:
+            fsl,common-rxtx-pins:
+              type: 'null'
+        then:
+          properties:
+            clocks:
+              items:
+                - description: External clock connected to L1RSYNC pin
+                - description: External clock connected to L1RCLK pin
+                - description: External clock connected to L1TSYNC pin
+                - description: External clock connected to L1TCLK pin
+            clock-names:
+              items:
+                - const: l1rsync
+                - const: l1rclk
+                - const: l1tsync
+                - const: l1tclk
+        else:
+          properties:
+            clocks:
+              items:
+                - description: External clock connected to L1RSYNC pin
+                - description: External clock connected to L1RCLK pin
+            clock-names:
+              items:
+                - const: l1rsync
+                - const: l1rclk
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/fsl-tsa.h>
+
+    tsa@ae0 {
+        compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
+        reg = <0xae0 0x10>,
+              <0xc00 0x200>;
+        reg-names = "si_regs", "si_ram";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tdm@0 {
+            /* TDMa */
+            reg = <0>;
+
+            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
+            clock-names = "l1rsync", "l1rclk";
+
+            fsl,common-rxtx-pins;
+            fsl,fsync-rising-edge;
+
+            tx_ts_routes = < 2 0 0>,                 /* TS 0..1 */
+                           < 24 FSL_CPM_TSA_SCC4 0>, /* TS 2..25 */
+                           < 1 0 0>,                 /* TS 26 */
+                           < 5 FSL_CPM_TSA_SCC3 0>;  /* TS 27..31 */
+
+            rx_ts_routes = < 2 0 0>,                 /* TS 0..1 */
+                           < 24 FSL_CPM_TSA_SCC4 0>, /* 2..25 */
+                           < 1 0 0>,                 /* TS 26 */
+                           < 5 FSL_CPM_TSA_SCC3 0>;  /* TS 27..31 */
+        };
+    };
diff --git a/include/dt-bindings/soc/fsl-tsa.h b/include/dt-bindings/soc/fsl-tsa.h
new file mode 100644
index 000000000000..9d09468694a2
--- /dev/null
+++ b/include/dt-bindings/soc/fsl-tsa.h
@@ -0,0 +1,15 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT */
+
+#ifndef __DT_BINDINGS_SOC_FSL_TSA_H
+#define __DT_BINDINGS_SOC_FSL_TSA_H
+
+#define FSL_CPM_TSA_NU		0	/* Pseuso Cell Id for not used item */
+#define FSL_CPM_TSA_SCC2	1
+#define FSL_CPM_TSA_SCC3	2
+#define FSL_CPM_TSA_SCC4	3
+#define FSL_CPM_TSA_SMC1	4
+#define FSL_CPM_TSA_SMC2	5
+
+#define FSL_CPM_TSA_NBCELL	6
+
+#endif