| Message ID | 20230110084636.1141740-1-jonas@kwiboo.se (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | pinctrl: rockchip: fix mux route data for rk3568 | expand |
On 2023-01-10 10:42, jay.xu@rock-chips.com wrote: > Hi Jonas > > A patch from https://github.com/rockchip-linux/kernel/commit/55aa440fb85377a8b8c7e4bbc367463c235da804 > can you try it ? Good that this was fixed in vendor kernel long time ago. Could have saved me some hours of troubleshooting if it would have been upstreamed to mainline :-) Also, good to see that we have made similar changes to get io mux working on rk3568, makes me more confident that the changes I made is correct. I had issues with HDMI CEC on my new rk3568 board and was able to fix the issue with these io mux changes and some device tree changes [1]. [1] https://lore.kernel.org/linux-rockchip/20230110225547.1563119-1-jonas@kwiboo.se/ Regards, Jonas > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ > > * 底层平台**部 许剑群（Jay）* > > ********************************************************** > 公司：瑞芯微电子股份有限公司 > 地址：福建省福州市铜盘路软件大道89号软件园A区x号楼 > 邮编：350003 > > Tel: 0591-83991906转8102（分机号） > > E-mail:jay.xu@rock-chips.com > > ********************************************** > > 保密提示：本邮件及其附件含有机密信息来自瑞芯微电子股份有限公司，仅发送给本邮件所指特定收件人。若非该特定收件人，请勿复制、使用或披露本邮件的任何内容。若误收本邮件，请从系统中永久性删除本邮件及所有附件，并以回复邮件或其他方式即刻告知发件人。瑞芯微电子股份有限公司拥有本邮件信息的著作权及解释权，禁止任何未经授权许可的侵权行为。 > > IMPORTANT NOTICE: This email is from Rockchip Electronics Co., Ltd .The contents of this email and any attachments may contain information that is privileged, confidential and/or exempt from disclosure under applicable law and relevant NDA. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information is STRICTLY PROHIBITED. Please immediately contact the sender as soon as possible and destroy the material in its entirety in any format. Thank you. > > *************************************************************************** > > *From:* Jonas Karlman <mailto:jonas@kwiboo.se> > *Date:* 2023-01-10 16:46 > *To:* Linus Walleij <mailto:linus.walleij@linaro.org>; Heiko Stuebner <mailto:heiko@sntech.de> > *CC:* Jianqun Xu <mailto:jay.xu@rock-chips.com>; linux-gpio <mailto:linux-gpio@vger.kernel.org>; linux-rockchip <mailto:linux-rockchip@lists.infradead.org>; linux-arm-kernel <mailto:linux-arm-kernel@lists.infradead.org>; Jonas Karlman <mailto:jonas@kwiboo.se> > *Subject:* [PATCH] pinctrl: rockchip: fix mux route data for rk3568 > IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5 > regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is > configured in GRF_IOFUNC regs according to TRM [1]. > Update mux route data to reflect this and use proper detection pin for > UART1 IO mux M1. > This fixes HDMITX IO mux M1 selection and makes it possible to enable > HDMI CEC on my Radxa ROCK 3 Model A v1.31 board. > [1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF > Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> > --- > drivers/pinctrl/pinctrl-rockchip.c | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c > index da974ff2d75d..849d5fa2a362 100644 > --- a/drivers/pinctrl/pinctrl-rockchip.c > +++ b/drivers/pinctrl/pinctrl-rockchip.c > @@ -926,19 +926,19 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { > RK_MUXROUTE_PMU(0, RK_PB5, 4, 0x0110, WRITE_MASK_VAL(3, 2, 1)), /* PWM1 IO mux M1 */ > RK_MUXROUTE_PMU(0, RK_PC1, 1, 0x0110, WRITE_MASK_VAL(5, 4, 0)), /* PWM2 IO mux M0 */ > RK_MUXROUTE_PMU(0, RK_PB6, 4, 0x0110, WRITE_MASK_VAL(5, 4, 1)), /* PWM2 IO mux M1 */ > - RK_MUXROUTE_PMU(0, RK_PB3, 2, 0x0300, WRITE_MASK_VAL(0, 0, 0)), /* CAN0 IO mux M0 */ > + RK_MUXROUTE_GRF(0, RK_PB3, 2, 0x0300, WRITE_MASK_VAL(0, 0, 0)), /* CAN0 IO mux M0 */ > RK_MUXROUTE_GRF(2, RK_PA1, 4, 0x0300, WRITE_MASK_VAL(0, 0, 1)), /* CAN0 IO mux M1 */ > RK_MUXROUTE_GRF(1, RK_PA1, 3, 0x0300, WRITE_MASK_VAL(2, 2, 0)), /* CAN1 IO mux M0 */ > RK_MUXROUTE_GRF(4, RK_PC3, 3, 0x0300, WRITE_MASK_VAL(2, 2, 1)), /* CAN1 IO mux M1 */ > RK_MUXROUTE_GRF(4, RK_PB5, 3, 0x0300, WRITE_MASK_VAL(4, 4, 0)), /* CAN2 IO mux M0 */ > RK_MUXROUTE_GRF(2, RK_PB2, 4, 0x0300, WRITE_MASK_VAL(4, 4, 1)), /* CAN2 IO mux M1 */ > RK_MUXROUTE_GRF(4, RK_PC4, 1, 0x0300, WRITE_MASK_VAL(6, 6, 0)), /* HPDIN IO mux M0 */ > - RK_MUXROUTE_PMU(0, RK_PC2, 2, 0x0300, WRITE_MASK_VAL(6, 6, 1)), /* HPDIN IO mux M1 */ > + RK_MUXROUTE_GRF(0, RK_PC2, 2, 0x0300, WRITE_MASK_VAL(6, 6, 1)), /* HPDIN IO mux M1 */ > RK_MUXROUTE_GRF(3, RK_PB1, 3, 0x0300, WRITE_MASK_VAL(8, 8, 0)), /* GMAC1 IO mux M0 */ > RK_MUXROUTE_GRF(4, RK_PA7, 3, 0x0300, WRITE_MASK_VAL(8, 8, 1)), /* GMAC1 IO mux M1 */ > RK_MUXROUTE_GRF(4, RK_PD1, 1, 0x0300, WRITE_MASK_VAL(10, 10, 0)), /* HDMITX IO mux M0 */ > - RK_MUXROUTE_PMU(0, RK_PC7, 1, 0x0300, WRITE_MASK_VAL(10, 10, 1)), /* HDMITX IO mux M1 */ > - RK_MUXROUTE_PMU(0, RK_PB6, 1, 0x0300, WRITE_MASK_VAL(14, 14, 0)), /* I2C2 IO mux M0 */ > + RK_MUXROUTE_GRF(0, RK_PC7, 1, 0x0300, WRITE_MASK_VAL(10, 10, 1)), /* HDMITX IO mux M1 */ > + RK_MUXROUTE_GRF(0, RK_PB6, 1, 0x0300, WRITE_MASK_VAL(14, 14, 0)), /* I2C2 IO mux M0 */ > RK_MUXROUTE_GRF(4, RK_PB4, 1, 0x0300, WRITE_MASK_VAL(14, 14, 1)), /* I2C2 IO mux M1 */ > RK_MUXROUTE_GRF(1, RK_PA0, 1, 0x0304, WRITE_MASK_VAL(0, 0, 0)), /* I2C3 IO mux M0 */ > RK_MUXROUTE_GRF(3, RK_PB6, 4, 0x0304, WRITE_MASK_VAL(0, 0, 1)), /* I2C3 IO mux M1 */ > @@ -964,7 +964,7 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { > RK_MUXROUTE_GRF(4, RK_PC3, 1, 0x0308, WRITE_MASK_VAL(12, 12, 1)), /* PWM15 IO mux M1 */ > RK_MUXROUTE_GRF(3, RK_PD2, 3, 0x0308, WRITE_MASK_VAL(14, 14, 0)), /* SDMMC2 IO mux M0 */ > RK_MUXROUTE_GRF(3, RK_PA5, 5, 0x0308, WRITE_MASK_VAL(14, 14, 1)), /* SDMMC2 IO mux M1 */ > - RK_MUXROUTE_PMU(0, RK_PB5, 2, 0x030c, WRITE_MASK_VAL(0, 0, 0)), /* SPI0 IO mux M0 */ > + RK_MUXROUTE_GRF(0, RK_PB5, 2, 0x030c, WRITE_MASK_VAL(0, 0, 0)), /* SPI0 IO mux M0 */ > RK_MUXROUTE_GRF(2, RK_PD3, 3, 0x030c, WRITE_MASK_VAL(0, 0, 1)), /* SPI0 IO mux M1 */ > RK_MUXROUTE_GRF(2, RK_PB5, 3, 0x030c, WRITE_MASK_VAL(2, 2, 0)), /* SPI1 IO mux M0 */ > RK_MUXROUTE_GRF(3, RK_PC3, 3, 0x030c, WRITE_MASK_VAL(2, 2, 1)), /* SPI1 IO mux M1 */ > @@ -973,8 +973,8 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { > RK_MUXROUTE_GRF(4, RK_PB3, 4, 0x030c, WRITE_MASK_VAL(6, 6, 0)), /* SPI3 IO mux M0 */ > RK_MUXROUTE_GRF(4, RK_PC2, 2, 0x030c, WRITE_MASK_VAL(6, 6, 1)), /* SPI3 IO mux M1 */ > RK_MUXROUTE_GRF(2, RK_PB4, 2, 0x030c, WRITE_MASK_VAL(8, 8, 0)), /* UART1 IO mux M0 */ > - RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(8, 8, 1)), /* UART1 IO mux M1 */ > - RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(10, 10, 0)), /* UART2 IO mux M0 */ > + RK_MUXROUTE_GRF(3, RK_PD6, 4, 0x030c, WRITE_MASK_VAL(8, 8, 1)), /* UART1 IO mux M1 */ > + RK_MUXROUTE_GRF(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(10, 10, 0)), /* UART2 IO mux M0 */ > RK_MUXROUTE_GRF(1, RK_PD5, 2, 0x030c, WRITE_MASK_VAL(10, 10, 1)), /* UART2 IO mux M1 */ > RK_MUXROUTE_GRF(1, RK_PA1, 2, 0x030c, WRITE_MASK_VAL(12, 12, 0)), /* UART3 IO mux M0 */ > RK_MUXROUTE_GRF(3, RK_PB7, 4, 0x030c, WRITE_MASK_VAL(12, 12, 1)), /* UART3 IO mux M1 */ > @@ -1004,13 +1004,13 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { > RK_MUXROUTE_GRF(3, RK_PD6, 5, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */ > RK_MUXROUTE_GRF(4, RK_PA0, 4, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */ > RK_MUXROUTE_GRF(3, RK_PC4, 5, 0x0314, WRITE_MASK_VAL(1, 0, 2)), /* PDM IO mux M2 */ > - RK_MUXROUTE_PMU(0, RK_PA5, 3, 0x0314, WRITE_MASK_VAL(3, 2, 0)), /* PCIE20 IO mux M0 */ > + RK_MUXROUTE_GRF(0, RK_PA5, 3, 0x0314, WRITE_MASK_VAL(3, 2, 0)), /* PCIE20 IO mux M0 */ > RK_MUXROUTE_GRF(2, RK_PD0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 1)), /* PCIE20 IO mux M1 */ > RK_MUXROUTE_GRF(1, RK_PB0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 2)), /* PCIE20 IO mux M2 */ > - RK_MUXROUTE_PMU(0, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(5, 4, 0)), /* PCIE30X1 IO mux M0 */ > + RK_MUXROUTE_GRF(0, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(5, 4, 0)), /* PCIE30X1 IO mux M0 */ > RK_MUXROUTE_GRF(2, RK_PD2, 4, 0x0314, WRITE_MASK_VAL(5, 4, 1)), /* PCIE30X1 IO mux M1 */ > RK_MUXROUTE_GRF(1, RK_PA5, 4, 0x0314, WRITE_MASK_VAL(5, 4, 2)), /* PCIE30X1 IO mux M2 */ > - RK_MUXROUTE_PMU(0, RK_PA6, 2, 0x0314, WRITE_MASK_VAL(7, 6, 0)), /* PCIE30X2 IO mux M0 */ > + RK_MUXROUTE_GRF(0, RK_PA6, 2, 0x0314, WRITE_MASK_VAL(7, 6, 0)), /* PCIE30X2 IO mux M0 */ > RK_MUXROUTE_GRF(2, RK_PD4, 4, 0x0314, WRITE_MASK_VAL(7, 6, 1)), /* PCIE30X2 IO mux M1 */ > RK_MUXROUTE_GRF(4, RK_PC2, 4, 0x0314, WRITE_MASK_VAL(7, 6, 2)), /* PCIE30X2 IO mux M2 */ > }; > -- > 2.39.0 >
On Wed, Jan 11, 2023 at 9:42 AM Jonas Karlman <jonas@kwiboo.se> wrote: > On 2023-01-10 10:42, jay.xu@rock-chips.com wrote: > > Hi Jonas > > > > A patch from https://github.com/rockchip-linux/kernel/commit/55aa440fb85377a8b8c7e4bbc367463c235da804 > > can you try it ? > > Good that this was fixed in vendor kernel long time ago. > Could have saved me some hours of troubleshooting if it would have been upstreamed to mainline :-) Hm hm some technical debt to pay off here I see. It happens to us all. Jonas is your patch identical or do you want to send a more inspired version with more of the fixes from the vendor tree? I'm certainly not going to sit and wait for the patch to come from another source, so I would like to apply some version of this patch. Yours, Linus Walleij
Hi Linus, On 2023-01-16 13:39, Linus Walleij wrote: > On Wed, Jan 11, 2023 at 9:42 AM Jonas Karlman <jonas@kwiboo.se> wrote: >> On 2023-01-10 10:42, jay.xu@rock-chips.com wrote: >>> Hi Jonas >>> >>> A patch from https://github.com/rockchip-linux/kernel/commit/55aa440fb85377a8b8c7e4bbc367463c235da804 >>> can you try it ? >> >> Good that this was fixed in vendor kernel long time ago. >> Could have saved me some hours of troubleshooting if it would have been upstreamed to mainline :-) > > Hm hm some technical debt to pay off here I see. It happens > to us all. > > Jonas is your patch identical or do you want to send a more > inspired version with more of the fixes from the vendor tree? My patch should be good to go, it seem to match the code in latest vendor 5.10 tree. The vendor tree does contain one additional detection pin for GMAC1 IO mux M1, GPIO4_B7 (gmac1m1-miim) in addition to the existing GPIO4_A7 (gmac1m1-rx-bus2). However, I do not see any need for what seem to be a superfluous detection pin, all in-tree device tree select both gmac1m1-rx-bus2 and gmac1m1-miim. Best regards, Jonas > > I'm certainly not going to sit and wait for the patch to come > from another source, so I would like to apply some version of > this patch. > > Yours, > Linus Walleij
On Tue, Jan 10, 2023 at 9:46 AM Jonas Karlman <jonas@kwiboo.se> wrote: > IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5 > regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is > configured in GRF_IOFUNC regs according to TRM [1]. > > Update mux route data to reflect this and use proper detection pin for > UART1 IO mux M1. > > This fixes HDMITX IO mux M1 selection and makes it possible to enable > HDMI CEC on my Radxa ROCK 3 Model A v1.31 board. > > [1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF > > Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Patch applied for fixes! Yours, Linus Walleij
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index da974ff2d75d..849d5fa2a362 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -926,19 +926,19 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { RK_MUXROUTE_PMU(0, RK_PB5, 4, 0x0110, WRITE_MASK_VAL(3, 2, 1)), /* PWM1 IO mux M1 */ RK_MUXROUTE_PMU(0, RK_PC1, 1, 0x0110, WRITE_MASK_VAL(5, 4, 0)), /* PWM2 IO mux M0 */ RK_MUXROUTE_PMU(0, RK_PB6, 4, 0x0110, WRITE_MASK_VAL(5, 4, 1)), /* PWM2 IO mux M1 */ - RK_MUXROUTE_PMU(0, RK_PB3, 2, 0x0300, WRITE_MASK_VAL(0, 0, 0)), /* CAN0 IO mux M0 */ + RK_MUXROUTE_GRF(0, RK_PB3, 2, 0x0300, WRITE_MASK_VAL(0, 0, 0)), /* CAN0 IO mux M0 */ RK_MUXROUTE_GRF(2, RK_PA1, 4, 0x0300, WRITE_MASK_VAL(0, 0, 1)), /* CAN0 IO mux M1 */ RK_MUXROUTE_GRF(1, RK_PA1, 3, 0x0300, WRITE_MASK_VAL(2, 2, 0)), /* CAN1 IO mux M0 */ RK_MUXROUTE_GRF(4, RK_PC3, 3, 0x0300, WRITE_MASK_VAL(2, 2, 1)), /* CAN1 IO mux M1 */ RK_MUXROUTE_GRF(4, RK_PB5, 3, 0x0300, WRITE_MASK_VAL(4, 4, 0)), /* CAN2 IO mux M0 */ RK_MUXROUTE_GRF(2, RK_PB2, 4, 0x0300, WRITE_MASK_VAL(4, 4, 1)), /* CAN2 IO mux M1 */ RK_MUXROUTE_GRF(4, RK_PC4, 1, 0x0300, WRITE_MASK_VAL(6, 6, 0)), /* HPDIN IO mux M0 */ - RK_MUXROUTE_PMU(0, RK_PC2, 2, 0x0300, WRITE_MASK_VAL(6, 6, 1)), /* HPDIN IO mux M1 */ + RK_MUXROUTE_GRF(0, RK_PC2, 2, 0x0300, WRITE_MASK_VAL(6, 6, 1)), /* HPDIN IO mux M1 */ RK_MUXROUTE_GRF(3, RK_PB1, 3, 0x0300, WRITE_MASK_VAL(8, 8, 0)), /* GMAC1 IO mux M0 */ RK_MUXROUTE_GRF(4, RK_PA7, 3, 0x0300, WRITE_MASK_VAL(8, 8, 1)), /* GMAC1 IO mux M1 */ RK_MUXROUTE_GRF(4, RK_PD1, 1, 0x0300, WRITE_MASK_VAL(10, 10, 0)), /* HDMITX IO mux M0 */ - RK_MUXROUTE_PMU(0, RK_PC7, 1, 0x0300, WRITE_MASK_VAL(10, 10, 1)), /* HDMITX IO mux M1 */ - RK_MUXROUTE_PMU(0, RK_PB6, 1, 0x0300, WRITE_MASK_VAL(14, 14, 0)), /* I2C2 IO mux M0 */ + RK_MUXROUTE_GRF(0, RK_PC7, 1, 0x0300, WRITE_MASK_VAL(10, 10, 1)), /* HDMITX IO mux M1 */ + RK_MUXROUTE_GRF(0, RK_PB6, 1, 0x0300, WRITE_MASK_VAL(14, 14, 0)), /* I2C2 IO mux M0 */ RK_MUXROUTE_GRF(4, RK_PB4, 1, 0x0300, WRITE_MASK_VAL(14, 14, 1)), /* I2C2 IO mux M1 */ RK_MUXROUTE_GRF(1, RK_PA0, 1, 0x0304, WRITE_MASK_VAL(0, 0, 0)), /* I2C3 IO mux M0 */ RK_MUXROUTE_GRF(3, RK_PB6, 4, 0x0304, WRITE_MASK_VAL(0, 0, 1)), /* I2C3 IO mux M1 */ @@ -964,7 +964,7 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { RK_MUXROUTE_GRF(4, RK_PC3, 1, 0x0308, WRITE_MASK_VAL(12, 12, 1)), /* PWM15 IO mux M1 */ RK_MUXROUTE_GRF(3, RK_PD2, 3, 0x0308, WRITE_MASK_VAL(14, 14, 0)), /* SDMMC2 IO mux M0 */ RK_MUXROUTE_GRF(3, RK_PA5, 5, 0x0308, WRITE_MASK_VAL(14, 14, 1)), /* SDMMC2 IO mux M1 */ - RK_MUXROUTE_PMU(0, RK_PB5, 2, 0x030c, WRITE_MASK_VAL(0, 0, 0)), /* SPI0 IO mux M0 */ + RK_MUXROUTE_GRF(0, RK_PB5, 2, 0x030c, WRITE_MASK_VAL(0, 0, 0)), /* SPI0 IO mux M0 */ RK_MUXROUTE_GRF(2, RK_PD3, 3, 0x030c, WRITE_MASK_VAL(0, 0, 1)), /* SPI0 IO mux M1 */ RK_MUXROUTE_GRF(2, RK_PB5, 3, 0x030c, WRITE_MASK_VAL(2, 2, 0)), /* SPI1 IO mux M0 */ RK_MUXROUTE_GRF(3, RK_PC3, 3, 0x030c, WRITE_MASK_VAL(2, 2, 1)), /* SPI1 IO mux M1 */ @@ -973,8 +973,8 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { RK_MUXROUTE_GRF(4, RK_PB3, 4, 0x030c, WRITE_MASK_VAL(6, 6, 0)), /* SPI3 IO mux M0 */ RK_MUXROUTE_GRF(4, RK_PC2, 2, 0x030c, WRITE_MASK_VAL(6, 6, 1)), /* SPI3 IO mux M1 */ RK_MUXROUTE_GRF(2, RK_PB4, 2, 0x030c, WRITE_MASK_VAL(8, 8, 0)), /* UART1 IO mux M0 */ - RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(8, 8, 1)), /* UART1 IO mux M1 */ - RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(10, 10, 0)), /* UART2 IO mux M0 */ + RK_MUXROUTE_GRF(3, RK_PD6, 4, 0x030c, WRITE_MASK_VAL(8, 8, 1)), /* UART1 IO mux M1 */ + RK_MUXROUTE_GRF(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(10, 10, 0)), /* UART2 IO mux M0 */ RK_MUXROUTE_GRF(1, RK_PD5, 2, 0x030c, WRITE_MASK_VAL(10, 10, 1)), /* UART2 IO mux M1 */ RK_MUXROUTE_GRF(1, RK_PA1, 2, 0x030c, WRITE_MASK_VAL(12, 12, 0)), /* UART3 IO mux M0 */ RK_MUXROUTE_GRF(3, RK_PB7, 4, 0x030c, WRITE_MASK_VAL(12, 12, 1)), /* UART3 IO mux M1 */ @@ -1004,13 +1004,13 @@ static struct rockchip_mux_route_data rk3568_mux_route_data[] = { RK_MUXROUTE_GRF(3, RK_PD6, 5, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */ RK_MUXROUTE_GRF(4, RK_PA0, 4, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */ RK_MUXROUTE_GRF(3, RK_PC4, 5, 0x0314, WRITE_MASK_VAL(1, 0, 2)), /* PDM IO mux M2 */ - RK_MUXROUTE_PMU(0, RK_PA5, 3, 0x0314, WRITE_MASK_VAL(3, 2, 0)), /* PCIE20 IO mux M0 */ + RK_MUXROUTE_GRF(0, RK_PA5, 3, 0x0314, WRITE_MASK_VAL(3, 2, 0)), /* PCIE20 IO mux M0 */ RK_MUXROUTE_GRF(2, RK_PD0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 1)), /* PCIE20 IO mux M1 */ RK_MUXROUTE_GRF(1, RK_PB0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 2)), /* PCIE20 IO mux M2 */ - RK_MUXROUTE_PMU(0, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(5, 4, 0)), /* PCIE30X1 IO mux M0 */ + RK_MUXROUTE_GRF(0, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(5, 4, 0)), /* PCIE30X1 IO mux M0 */ RK_MUXROUTE_GRF(2, RK_PD2, 4, 0x0314, WRITE_MASK_VAL(5, 4, 1)), /* PCIE30X1 IO mux M1 */ RK_MUXROUTE_GRF(1, RK_PA5, 4, 0x0314, WRITE_MASK_VAL(5, 4, 2)), /* PCIE30X1 IO mux M2 */ - RK_MUXROUTE_PMU(0, RK_PA6, 2, 0x0314, WRITE_MASK_VAL(7, 6, 0)), /* PCIE30X2 IO mux M0 */ + RK_MUXROUTE_GRF(0, RK_PA6, 2, 0x0314, WRITE_MASK_VAL(7, 6, 0)), /* PCIE30X2 IO mux M0 */ RK_MUXROUTE_GRF(2, RK_PD4, 4, 0x0314, WRITE_MASK_VAL(7, 6, 1)), /* PCIE30X2 IO mux M1 */ RK_MUXROUTE_GRF(4, RK_PC2, 4, 0x0314, WRITE_MASK_VAL(7, 6, 2)), /* PCIE30X2 IO mux M2 */ };
IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5 regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is configured in GRF_IOFUNC regs according to TRM [1]. Update mux route data to reflect this and use proper detection pin for UART1 IO mux M1. This fixes HDMITX IO mux M1 selection and makes it possible to enable HDMI CEC on my Radxa ROCK 3 Model A v1.31 board. [1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- drivers/pinctrl/pinctrl-rockchip.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)