diff mbox series

[v3,1/3] arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select

Message ID 20230111132348.553061-2-sjoerd@collabora.com (mailing list archive)
State New, archived
Headers show
Series Improve K3-am625-sk support (USB, MMC) | expand

Commit Message

Sjoerd Simons Jan. 11, 2023, 1:23 p.m. UTC
From: Nitin Yadav <n-yadav@ti.com>

UHS Class U1 sd-card are not getting detected due to incorrect
OTAP/ITAP delay select values in linux. Update OTAP and ITAP
delay select values for various speed modes. For sdhci0, update
OTAP delay values for ddr52 & HS200 and add ITAP delay for legacy
& mmc-hs. For sdhci1 & sdhci2, update OTAP & ITAP delay select
recommended as in RIOT for various speed modes.

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
[cherry-pick from vendor BSP]
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>

---

Changes in v3:
- Rebased against current ti-next aka 6.2-rc1
- Add Martyn's tested-by

Changes in v2:
- Rebase against linux-next 20221220

 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 46 ++++++++++++------------
 1 file changed, 24 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 072903649d6e..466b94d1cee9 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -501,8 +501,10 @@  sdhci0: mmc@fa10000 {
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
-		ti,otap-del-sel-ddr52 = <0x9>;
-		ti,otap-del-sel-hs200 = <0x6>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
 		status = "disabled";
 	};
 
@@ -514,17 +516,17 @@  sdhci1: mmc@fa00000 {
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
-		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
 		ti,clkbuf-sel = <0x7>;
 		bus-width = <4>;
 		status = "disabled";
@@ -538,17 +540,17 @@  sdhci2: mmc@fa20000 {
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
-		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x8>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0xa>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
 		ti,clkbuf-sel = <0x7>;
 		status = "disabled";
 	};