diff mbox series

[1/4] ARM: s3c: remove obsolete s3c-cpu-freq header

Message ID 20230112083746.9551-2-lukas.bulwahn@gmail.com (mailing list archive)
State New, archived
Headers show
Series Further code removal after Arnd's latest cleanup | expand

Commit Message

Lukas Bulwahn Jan. 12, 2023, 8:37 a.m. UTC
The s3c-cpu-freq header was previously included by:

  ./arch/arm/mach-s3c/mach-bast.c
  ./arch/arm/mach-s3c/mach-osiris-dvs.c
  ./arch/arm/mach-s3c/mach-osiris.c
  ./include/linux/soc/samsung/s3c-cpufreq-core.h

Commit a4946a153cb9 ("ARM: s3c: remove all s3c24xx support") removes the
files in ./arch/arm/mach-s3c/; commit daf0ee583fc7 ("cpufreq: remove
s3c24xx drivers") removes the file s3c-cpufreq-core.h.

Remove this obsolete header file.

This issue was identified, as s3c-cpu-freq.h referred to the removed config
ARM_S3C_CPUFREQ.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
 include/linux/soc/samsung/s3c-cpu-freq.h | 145 -----------------------
 1 file changed, 145 deletions(-)
 delete mode 100644 include/linux/soc/samsung/s3c-cpu-freq.h

Comments

Krzysztof Kozlowski Jan. 12, 2023, 8:57 a.m. UTC | #1
On 12/01/2023 09:37, Lukas Bulwahn wrote:
> The s3c-cpu-freq header was previously included by:
> 
>   ./arch/arm/mach-s3c/mach-bast.c
>   ./arch/arm/mach-s3c/mach-osiris-dvs.c
>   ./arch/arm/mach-s3c/mach-osiris.c
>   ./include/linux/soc/samsung/s3c-cpufreq-core.h
> 
> Commit a4946a153cb9 ("ARM: s3c: remove all s3c24xx support") removes the
> files in ./arch/arm/mach-s3c/; commit daf0ee583fc7 ("cpufreq: remove
> s3c24xx drivers") removes the file s3c-cpufreq-core.h.
> 
> Remove this obsolete header file.
> 
> This issue was identified, as s3c-cpu-freq.h referred to the removed config
> ARM_S3C_CPUFREQ.
> 
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
> ---
>  include/linux/soc/samsung/s3c-cpu-freq.h | 145 -----------------------
>  1 file changed, 145 deletions(-)


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/include/linux/soc/samsung/s3c-cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h
deleted file mode 100644
index 63e88fd5dea2..000000000000
--- a/include/linux/soc/samsung/s3c-cpu-freq.h
+++ /dev/null
@@ -1,145 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2006-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - driver and board
- */
-#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
-#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
-
-#include <linux/cpufreq.h>
-
-struct s3c_cpufreq_info;
-struct s3c_cpufreq_board;
-struct s3c_iotimings;
-
-/**
- * struct s3c_freq - frequency information (mainly for core drivers)
- * @fclk: The FCLK frequency in Hz.
- * @armclk: The ARMCLK frequency in Hz.
- * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
- * @hclk: The HCLK frequency in Hz.
- * @pclk: The PCLK frequency in Hz.
- *
- * This contains the frequency information about the current configuration
- * mainly for the core drivers to ensure we do not end up passing about
- * a large number of parameters.
- *
- * The @hclk_tns field is a useful cache for the parts of the drivers that
- * need to calculate IO timings and suchlike.
- */
-struct s3c_freq {
-	unsigned long	fclk;
-	unsigned long	armclk;
-	unsigned long	hclk_tns;	/* in 10ths of ns */
-	unsigned long	hclk;
-	unsigned long	pclk;
-};
-
-/**
- * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
- * @freqs: The cpufreq setting information.
- * @old: The old clock settings.
- * @new: The new clock settings.
- * @pll_changing: Set if the PLL is changing.
- *
- * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
- * notification can use this information that is not provided by just
- * having the core frequency alone.
- *
- * The pll_changing flag is used to indicate if the PLL itself is
- * being set during this change. This is important as the clocks
- * will temporarily be set to the XTAL clock during this time, so
- * drivers may want to close down their output during this time.
- *
- * Note, this is not being used by any current drivers and therefore
- * may be removed in the future.
- */
-struct s3c_cpufreq_freqs {
-	struct cpufreq_freqs	freqs;
-	struct s3c_freq		old;
-	struct s3c_freq		new;
-
-	unsigned int		pll_changing:1;
-};
-
-#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
-
-/**
- * struct s3c_clkdivs - clock divisor information
- * @p_divisor: Divisor from FCLK to PCLK.
- * @h_divisor: Divisor from FCLK to HCLK.
- * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
- * @dvs: Non-zero if using DVS mode for ARMCLK.
- *
- * Divisor settings for the core clocks.
- */
-struct s3c_clkdivs {
-	int		p_divisor;
-	int		h_divisor;
-	int		arm_divisor;
-	unsigned char	dvs;
-};
-
-#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
-
-/**
- * struct s3c_pllval - PLL value entry.
- * @freq: The frequency for this entry in Hz.
- * @pll_reg: The PLL register setting for this PLL value.
- */
-struct s3c_pllval {
-	unsigned long		freq;
-	unsigned long		pll_reg;
-};
-
-/**
- * struct s3c_cpufreq_board - per-board cpu frequency informatin
- * @refresh: The SDRAM refresh period in nanoseconds.
- * @auto_io: Set if the IO timing settings should be generated from the
- *	initialisation time hardware registers.
- * @need_io: Set if the board has external IO on any of the chipselect
- *	lines that will require the hardware timing registers to be
- *	updated on a clock change.
- * @max: The maxium frequency limits for the system. Any field that
- *	is left at zero will use the CPU's settings.
- *
- * This contains the board specific settings that affect how the CPU
- * drivers chose settings. These include the memory refresh and IO
- * timing information.
- *
- * Registration depends on the driver being used, the ARMCLK only
- * implementation does not currently need this but the older style
- * driver requires this to be available.
- */
-struct s3c_cpufreq_board {
-	unsigned int	refresh;
-	unsigned int	auto_io:1;	/* automatically init io timings. */
-	unsigned int	need_io:1;	/* set if needs io timing support. */
-
-	/* any non-zero field in here is taken as an upper limit. */
-	struct s3c_freq	max;	/* frequency limits */
-};
-
-/* Things depending on frequency scaling. */
-#ifdef CONFIG_ARM_S3C_CPUFREQ
-#define __init_or_cpufreq
-#else
-#define __init_or_cpufreq __init
-#endif
-
-/* Board functions */
-
-#ifdef CONFIG_ARM_S3C_CPUFREQ
-extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
-#else
-
-static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
-	return 0;
-}
-#endif  /* CONFIG_ARM_S3C_CPUFREQ */
-
-#endif