@@ -57,15 +57,35 @@ &adc { /* X11 ADC inputs */
status = "okay";
adc1: adc@0 {
- st,adc-channels = <0 1 6>;
- st,min-sample-time-nsecs = <5000>;
status = "okay";
+ channel@0 {
+ reg = <0>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <5000>;
+ };
};
adc2: adc@100 {
- st,adc-channels = <0 1 2>;
- st,min-sample-time-nsecs = <5000>;
status = "okay";
+ channel@0 {
+ reg = <0>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@2 {
+ reg = <2>;
+ st,min-sample-time-ns = <5000>;
+ };
};
};
Use STM32 ADC generic bindings instead of legacy bindings on DHCOR DRC Compact board. The STM32 ADC specific binding to declare channels has been deprecated, hence adopt the generic IIO channels bindings, instead. The STM32MP151 device tree now exposes internal channels using the generic binding. This makes the change mandatory here to avoid a mixed use of legacy and generic binding, which is not supported by the driver. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> --- .../dts/stm32mp15xx-dhcor-drc-compact.dtsi | 28 ++++++++++++++++--- 1 file changed, 24 insertions(+), 4 deletions(-)