| Message ID | 20230119221322.12563-7-bb@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/6] arm64: dts: ti: k3-am64-main: add VTM node | expand |
NAK: My apologies for the noise :( On January 19, 2023 thus sayeth Bryan Brattlof: > The am62ax supports a single Voltage and Thermal Management (VTM) device > located in the wakeup domain with three associated temperature monitors > located in various hot spots of the die. > > Signed-off-by: Bryan Brattlof <bb@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi | 47 ++++++++++++++++++++ > arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 8 ++++ > arch/arm64/boot/dts/ti/k3-am62a.dtsi | 2 + > 3 files changed, 57 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi > ... > + > + main1_thermal: main1-thermal { > + polling-delay-passive = <250>; /* milliSeconds */ > + polling-delay = <500>; /* milliSeconds */ > + thermal-sensors = <&wkup_vtm0 0>; ^^^^^^^^^^^^^^ This should be <&wkup_vtm0 1> > + > + trips { > + main1_crit: main1-crit { > + temperature = <125000>; /* milliCelsius */ > + hysteresis = <2000>; /* milliCelsius */ > + type = "critical"; > + }; > + }; > + }; > + > + main2_thermal: main2-thermal { > + polling-delay-passive = <250>; /* milliSeconds */ > + polling-delay = <500>; /* milliSeconds */ > + thermal-sensors = <&wkup_vtm0 0>; ^^^^^^^^^^^^^^ <&wkup_vtm0 2> > + trips { > + main2_crit: main2-crit { > + temperature = <125000>; /* milliCelsius */ > + hysteresis = <2000>; /* milliCelsius */ > + type = "critical"; > + }; > + }; > + }; > +}; Apologies for the noise again ~Bryan
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi new file mode 100644 index 0000000000000..02c2bae300c49 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main1_crit: main1-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main2_thermal: main2-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + main2_crit: main2-crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 81d984414fd4a..9bdafead7199a 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -51,4 +51,12 @@ wkup_rtc0: rtc@2b1f0000 { wakeup-source; status = "disabled"; }; + + wkup_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi index 6eb87c3f9f3ce..84e8adeeebb61 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -114,6 +114,8 @@ cbass_wakeup: bus@b00000 { <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ }; }; + + #include "k3-am62a-thermal.dtsi" }; /* Now include the peripherals for each bus segments */
The am62ax supports a single Voltage and Thermal Management (VTM) device located in the wakeup domain with three associated temperature monitors located in various hot spots of the die. Signed-off-by: Bryan Brattlof <bb@ti.com> --- arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi | 47 ++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 8 ++++ arch/arm64/boot/dts/ti/k3-am62a.dtsi | 2 + 3 files changed, 57 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi