| Message ID | 20230125081023.1573712-2-d-gole@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | STIG Mode Fixes for spi-cadence-qspi driver | expand |
Hi, On Wed, Jan 25 2023, Dhruva Gole wrote: > If one leaves the CQSPI_REG_CMDCTRL in an unclean state this may cause > issues in future command reads. This issue came to light when some flash > reads in STIG mode were coming back dirty. Can you explain in more detail what you mean by "reads coming back dirty"? Because I don't see any clear reason why not resetting the register would break anything. We re-create the register value from the scratch on the next read anyway, and as soon as you writel() that, the old fields get thrown away anyway. > > Signed-off-by: Dhruva Gole <d-gole@ti.com> > --- > drivers/spi/spi-cadence-quadspi.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c > index 676313e1bdad..6030da942c6e 100644 > --- a/drivers/spi/spi-cadence-quadspi.c > +++ b/drivers/spi/spi-cadence-quadspi.c > @@ -549,6 +549,9 @@ static int cqspi_command_read(struct cqspi_flash_pdata *f_pdata, > memcpy(rxbuf, ®, read_len); > } > > + /* Reset CMD_CTRL Reg once command read completes */ > + writel(0, reg_base + CQSPI_REG_CMDCTRL); > + > return 0; > } > > @@ -613,7 +616,12 @@ static int cqspi_command_write(struct cqspi_flash_pdata *f_pdata, > } > } > > - return cqspi_exec_flash_cmd(cqspi, reg); > + ret = cqspi_exec_flash_cmd(cqspi, reg); > + > + /* Reset CMD_CTRL Reg once command write completes */ > + writel(0, reg_base + CQSPI_REG_CMDCTRL); > + > + return ret; > } > > static int cqspi_read_setup(struct cqspi_flash_pdata *f_pdata, > -- > 2.25.1 >
Thanks for taking a look Pratyush! On 1/27/2023 8:46 PM, Pratyush Yadav wrote: > Hi, > > On Wed, Jan 25 2023, Dhruva Gole wrote: > >> If one leaves the CQSPI_REG_CMDCTRL in an unclean state this may cause >> issues in future command reads. This issue came to light when some flash >> reads in STIG mode were coming back dirty. > Can you explain in more detail what you mean by "reads coming back > dirty"? Because I don't see any clear reason why not resetting the > register would break anything. We re-create the register value from the > scratch on the next read anyway, and as soon as you writel() that, the > old fields get thrown away anyway. There's a hardware bug due to which clearing of this register is necessary. > [...]
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 676313e1bdad..6030da942c6e 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -549,6 +549,9 @@ static int cqspi_command_read(struct cqspi_flash_pdata *f_pdata, memcpy(rxbuf, ®, read_len); } + /* Reset CMD_CTRL Reg once command read completes */ + writel(0, reg_base + CQSPI_REG_CMDCTRL); + return 0; } @@ -613,7 +616,12 @@ static int cqspi_command_write(struct cqspi_flash_pdata *f_pdata, } } - return cqspi_exec_flash_cmd(cqspi, reg); + ret = cqspi_exec_flash_cmd(cqspi, reg); + + /* Reset CMD_CTRL Reg once command write completes */ + writel(0, reg_base + CQSPI_REG_CMDCTRL); + + return ret; } static int cqspi_read_setup(struct cqspi_flash_pdata *f_pdata,
If one leaves the CQSPI_REG_CMDCTRL in an unclean state this may cause issues in future command reads. This issue came to light when some flash reads in STIG mode were coming back dirty. Signed-off-by: Dhruva Gole <d-gole@ti.com> --- drivers/spi/spi-cadence-quadspi.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) -- 2.25.1