| Message ID | 20230213222229.686072-1-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] arm64: dts: imx8qxp: add cadence usb3 support | expand |
On Mon, Feb 13, 2023 at 05:22:27PM -0500, Frank Li wrote: > There are cadence usb3.0 controller in 8qxp and 8qm. > Add usb3 node at common connect subsystem. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > .../boot/dts/freescale/imx8-ss-conn.dtsi | 72 +++++++++++++++++++ > 1 file changed, 72 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi > index 4852760adeee..94692cee25a0 100644 > --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi > @@ -138,6 +138,56 @@ fec2: ethernet@5b050000 { > status = "disabled"; > }; > > + usbotg3: usb@5b110000 { > + compatible = "fsl,imx8qm-usb3"; Is the compatible documented? > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + reg = <0x5b110000 0x10000>; > + clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, > + <&usb3_lpcg IMX_LPCG_CLK_0>, > + <&usb3_lpcg IMX_LPCG_CLK_7>, > + <&usb3_lpcg IMX_LPCG_CLK_4>, > + <&usb3_lpcg IMX_LPCG_CLK_5>; > + clock-names = "usb3_lpm_clk", "usb3_bus_clk", "usb3_aclk", > + "usb3_ipg_clk", "usb3_core_pclk"; Can we align the indent at " on above line? > + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, > + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, > + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; Can we align the indent at < on above line? Shawn > + assigned-clock-rates = <125000000>, <12000000>, <250000000>; > + power-domains = <&pd IMX_SC_R_USB_2>; > + status = "disabled"; > + > + usbotg3_cdns3: usb@5b120000 { > + compatible = "cdns,usb3"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "host", "peripheral", "otg", "wakeup"; > + reg = <0x5b130000 0x10000>, /* memory area for HOST registers */ > + <0x5b140000 0x10000>, /* memory area for DEVICE registers */ > + <0x5b120000 0x10000>; /* memory area for OTG/DRD registers */ > + reg-names = "xhci", "dev", "otg"; > + phys = <&usb3_phy>; > + phy-names = "cdns3,usb3-phy"; > + status = "disabled"; > + }; > + }; > + > + usb3_phy: usb-phy@5b160000 { > + compatible = "nxp,salvo-phy"; > + reg = <0x5b160000 0x40000>; > + clocks = <&usb3_lpcg IMX_LPCG_CLK_6>; > + clock-names = "salvo_phy_clk"; > + power-domains = <&pd IMX_SC_R_USB_2_PHY>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > /* LPCG clocks */ > sdhc0_lpcg: clock-controller@5b200000 { > compatible = "fsl,imx8qxp-lpcg"; > @@ -234,4 +284,26 @@ usb2_lpcg: clock-controller@5b270000 { > clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk"; > power-domains = <&pd IMX_SC_R_USB_0_PHY>; > }; > + > + usb3_lpcg: clock-controller@5b280000 { > + compatible = "fsl,imx8qxp-lpcg"; > + reg = <0x5b280000 0x10000>; > + #clock-cells = <1>; > + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, > + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, > + <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; > + clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, > + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, > + <&conn_ipg_clk>, > + <&conn_ipg_clk>, > + <&conn_ipg_clk>, > + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; > + clock-output-names = "usb3_app_clk", > + "usb3_lpm_clk", > + "usb3_ipg_clk", > + "usb3_core_pclk", > + "usb3_phy_clk", > + "usb3_aclk"; > + power-domains = <&pd IMX_SC_R_USB_2_PHY>; > + }; > }; > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index 4852760adeee..94692cee25a0 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -138,6 +138,56 @@ fec2: ethernet@5b050000 { status = "disabled"; }; + usbotg3: usb@5b110000 { + compatible = "fsl,imx8qm-usb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x5b110000 0x10000>; + clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, + <&usb3_lpcg IMX_LPCG_CLK_0>, + <&usb3_lpcg IMX_LPCG_CLK_7>, + <&usb3_lpcg IMX_LPCG_CLK_4>, + <&usb3_lpcg IMX_LPCG_CLK_5>; + clock-names = "usb3_lpm_clk", "usb3_bus_clk", "usb3_aclk", + "usb3_ipg_clk", "usb3_core_pclk"; + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <125000000>, <12000000>, <250000000>; + power-domains = <&pd IMX_SC_R_USB_2>; + status = "disabled"; + + usbotg3_cdns3: usb@5b120000 { + compatible = "cdns,usb3"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg", "wakeup"; + reg = <0x5b130000 0x10000>, /* memory area for HOST registers */ + <0x5b140000 0x10000>, /* memory area for DEVICE registers */ + <0x5b120000 0x10000>; /* memory area for OTG/DRD registers */ + reg-names = "xhci", "dev", "otg"; + phys = <&usb3_phy>; + phy-names = "cdns3,usb3-phy"; + status = "disabled"; + }; + }; + + usb3_phy: usb-phy@5b160000 { + compatible = "nxp,salvo-phy"; + reg = <0x5b160000 0x40000>; + clocks = <&usb3_lpcg IMX_LPCG_CLK_6>; + clock-names = "salvo_phy_clk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + /* LPCG clocks */ sdhc0_lpcg: clock-controller@5b200000 { compatible = "fsl,imx8qxp-lpcg"; @@ -234,4 +284,26 @@ usb2_lpcg: clock-controller@5b270000 { clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk"; power-domains = <&pd IMX_SC_R_USB_0_PHY>; }; + + usb3_lpcg: clock-controller@5b280000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b280000 0x10000>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; + clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + clock-output-names = "usb3_app_clk", + "usb3_lpm_clk", + "usb3_ipg_clk", + "usb3_core_pclk", + "usb3_phy_clk", + "usb3_aclk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + }; };
There are cadence usb3.0 controller in 8qxp and 8qm. Add usb3 node at common connect subsystem. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- .../boot/dts/freescale/imx8-ss-conn.dtsi | 72 +++++++++++++++++++ 1 file changed, 72 insertions(+)