| Message ID | 20230223171114.59164-4-marex@denx.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/5] clk: Introduce devm_clk_hw_register_gate_parent_data() | expand |
Hi Marek, thanks for respinning this series. Am Donnerstag, 23. Februar 2023, 18:11:13 CET schrieb Marek Vasut: > Add all SAI nodes, SDMA2 and SDMA3 nodes, and AudioMIX node. This is > needed to get audio operational on i.MX8MP . > > Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > Signed-off-by: Marek Vasut <marex@denx.de> > --- > Cc: Abel Vesa <abelvesa@kernel.org> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Jacky Bai <ping.bai@nxp.com> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Lucas Stach <l.stach@pengutronix.de> > Cc: Marco Felsch <m.felsch@pengutronix.de> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: Peng Fan <peng.fan@nxp.com> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Richard Cochran <richardcochran@gmail.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-clk@vger.kernel.org > --- > V2: - Add AUDIO_AXI clock to audio gpc > - Use IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT for SDMA2 IPG clock > V3: Rename audio_ahb to plain ahb > V4: - Add RB/TB from Luca > - Rebase on next 20230223 > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 153 ++++++++++++++++++++++ > 1 file changed, 153 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index > ca8093ee4d0e4..56d2a6377a5a6 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -571,6 +571,13 @@ pgc_usb2_phy: power-domain@3 { > reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>; > }; > > + pgc_audio: power-domain@5 { > + #power-domain- cells = <0>; > + reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>; > + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, > + <&clk IMX8MP_CLK_AUDIO_AXI>; > + }; > + > pgc_gpu2d: power-domain@6 { > #power-domain- cells = <0>; > reg = <IMX8MP_POWER_DOMAIN_GPU2D>; > @@ -1119,6 +1126,152 @@ opp-1000000000 { > }; > }; > > + aips5: bus@30c00000 { > + compatible = "fsl,aips-bus", "simple-bus"; > + reg = <0x30c00000 0x400000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + spba-bus@30c00000 { > + compatible = "fsl,spba-bus", "simple- bus"; > + reg = <0x30c00000 0x100000>; Is there an SPBA bus for every AIPS? I'm wondering why some aips do have an spba below and some do not. > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + sai1: sai@30c10000 { > + compatible = "fsl,imx8mp- sai", "fsl,imx8mq-sai"; > + reg = <0x30c10000 0x10000>; > + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>, > + <&clk IMX8MP_CLK_DUMMY>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; Looking at Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml should the 2nd cell value be 24? This would be true for all other sai nodes. > + dma-names = "rx", "tx"; > + status = "disabled"; > + }; > + > + sai2: sai@30c20000 { > + compatible = "fsl,imx8mp- sai", "fsl,imx8mq-sai"; > + reg = <0x30c20000 0x10000>; > + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, > + <&clk IMX8MP_CLK_DUMMY>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; > + dma-names = "rx", "tx"; > + status = "disabled"; > + }; > + > + sai3: sai@30c30000 { > + compatible = "fsl,imx8mp- sai", "fsl,imx8mq-sai"; > + reg = <0x30c30000 0x10000>; > + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, > + <&clk IMX8MP_CLK_DUMMY>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; > + dma-names = "rx", "tx"; > + status = "disabled"; > + }; > + > + sai5: sai@30c50000 { > + compatible = "fsl,imx8mp- sai", "fsl,imx8mq-sai"; > + reg = <0x30c50000 0x10000>; > + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>, > + <&clk IMX8MP_CLK_DUMMY>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; > + dma-names = "rx", "tx"; > + status = "disabled"; > + }; > + > + sai6: sai@30c60000 { > + compatible = "fsl,imx8mp- sai", "fsl,imx8mq-sai"; > + reg = <0x30c60000 0x10000>; > + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>, > + <&clk IMX8MP_CLK_DUMMY>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; > + dma-names = "rx", "tx"; > + status = "disabled"; > + }; > + > + sai7: sai@30c80000 { > + compatible = "fsl,imx8mp- sai", "fsl,imx8mq-sai"; > + reg = <0x30c80000 0x10000>; > + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>, > + <&clk IMX8MP_CLK_DUMMY>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>, > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>; > + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; > + dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; > + dma-names = "rx", "tx"; > + status = "disabled"; > + }; > + }; > + > + sdma3: dma-controller@30e00000 { > + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; > + reg = <0x30e00000 0x10000>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, > + <&clk IMX8MP_CLK_AUDIO_ROOT>; > + clock-names = "ipg", "ahb"; > + #dma-cells = <3>; > + fsl,sdma-ram-script-name = "imx/sdma/ sdma-imx7d.bin"; > + }; > + > + sdma2: dma-controller@30e10000 { > + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; > + reg = <0x30e10000 0x10000>; > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, > + <&clk IMX8MP_CLK_AUDIO_ROOT>; > + clock-names = "ipg", "ahb"; > + #dma-cells = <3>; > + fsl,sdma-ram-script-name = "imx/sdma/ sdma-imx7d.bin"; > + }; > + > + audio_blk_ctrl: blk-ctrl@30e20000 { Shouldn't the node name be 'clock-controller@30e20000' as mentioned in the bindings? But for the whole series: Testes-by: Alexander Stein <alexander.stein@ew.tq-group.com> Best regards, Alexander > + #clock-cells = <1>; > + compatible = "fsl,imx8mp-audio-blk- ctrl"; > + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, > + <&clk IMX8MP_CLK_SAI1>, > + <&clk IMX8MP_CLK_SAI2>, > + <&clk IMX8MP_CLK_SAI3>, > + <&clk IMX8MP_CLK_SAI5>, > + <&clk IMX8MP_CLK_SAI6>, > + <&clk IMX8MP_CLK_SAI7>; > + clock-names = "ahb", > + "sai1", "sai2", "sai3", > + "sai5", "sai6", "sai7"; > + power-domains = <&pgc_audio>; > + power-domain-names = "audio"; > + reg = <0x30e20000 0x10000>; > + }; > + }; > + > aips4: bus@32c00000 { > compatible = "fsl,aips-bus", "simple-bus"; > reg = <0x32c00000 0x400000>;
On Mon, Feb 27, 2023 at 3:46 AM Alexander Stein <alexander.stein@ew.tq-group.com> wrote: > > Hi Marek, > > thanks for respinning this series. > > Am Donnerstag, 23. Februar 2023, 18:11:13 CET schrieb Marek Vasut: > > Add all SAI nodes, SDMA2 and SDMA3 nodes, and AudioMIX node. This is > > needed to get audio operational on i.MX8MP . > > > > Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > Signed-off-by: Marek Vasut <marex@denx.de> > > --- > > Cc: Abel Vesa <abelvesa@kernel.org> > > Cc: Fabio Estevam <festevam@gmail.com> > > Cc: Jacky Bai <ping.bai@nxp.com> > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Cc: Lucas Stach <l.stach@pengutronix.de> > > Cc: Marco Felsch <m.felsch@pengutronix.de> > > Cc: Michael Turquette <mturquette@baylibre.com> > > Cc: NXP Linux Team <linux-imx@nxp.com> > > Cc: Peng Fan <peng.fan@nxp.com> > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > > Cc: Richard Cochran <richardcochran@gmail.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: Stephen Boyd <sboyd@kernel.org> > > Cc: devicetree@vger.kernel.org > > Cc: linux-arm-kernel@lists.infradead.org > > Cc: linux-clk@vger.kernel.org > > --- > > V2: - Add AUDIO_AXI clock to audio gpc > > - Use IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT for SDMA2 IPG clock > > V3: Rename audio_ahb to plain ahb > > V4: - Add RB/TB from Luca > > - Rebase on next 20230223 > > --- > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 153 ++++++++++++++++++++++ > > 1 file changed, 153 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index > > ca8093ee4d0e4..56d2a6377a5a6 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > @@ -571,6 +571,13 @@ pgc_usb2_phy: power-domain@3 { > > reg = > <IMX8MP_POWER_DOMAIN_USB2_PHY>; > > }; > > > > + pgc_audio: power-domain@5 { > > + #power-domain- > cells = <0>; > > + reg = > <IMX8MP_POWER_DOMAIN_AUDIOMIX>; > > + clocks = <&clk > IMX8MP_CLK_AUDIO_ROOT>, > > + <&clk > IMX8MP_CLK_AUDIO_AXI>; > > + }; > > + > > pgc_gpu2d: power-domain@6 { > > #power-domain- > cells = <0>; > > reg = > <IMX8MP_POWER_DOMAIN_GPU2D>; > > @@ -1119,6 +1126,152 @@ opp-1000000000 { > > }; > > }; > > > > + aips5: bus@30c00000 { > > + compatible = "fsl,aips-bus", "simple-bus"; > > + reg = <0x30c00000 0x400000>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + spba-bus@30c00000 { > > + compatible = "fsl,spba-bus", "simple- > bus"; > > + reg = <0x30c00000 0x100000>; > > Is there an SPBA bus for every AIPS? I'm wondering why some aips do have an > spba below and some do not. The SPBA buses are listed in the TRM, and they appear to be mostly covering serial devices (UART, SPI, SAI, etc), but some are excluded. As to why it is this way is more of a question for NXP. Check out chapter 2 of the TRM for the AIPS memory maps. adam > > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + sai1: sai@30c10000 { > > + compatible = "fsl,imx8mp- > sai", "fsl,imx8mq-sai"; > > + reg = <0x30c10000 0x10000>; > > + interrupts = <GIC_SPI 95 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI1_IPG>, > > + <&clk > IMX8MP_CLK_DUMMY>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>; > > + clock-names = "bus", > "mclk0", "mclk1", "mclk2", "mclk3"; > > + dmas = <&sdma2 0 2 0>, > <&sdma2 1 2 0>; > > Looking at Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml should the > 2nd cell value be 24? This would be true for all other sai nodes. > > > + dma-names = "rx", "tx"; > > + status = "disabled"; > > + }; > > + > > + sai2: sai@30c20000 { > > + compatible = "fsl,imx8mp- > sai", "fsl,imx8mq-sai"; > > + reg = <0x30c20000 0x10000>; > > + interrupts = <GIC_SPI 96 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, > > + <&clk > IMX8MP_CLK_DUMMY>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>; > > + clock-names = "bus", > "mclk0", "mclk1", "mclk2", "mclk3"; > > + dmas = <&sdma2 2 2 0>, > <&sdma2 3 2 0>; > > + dma-names = "rx", "tx"; > > + status = "disabled"; > > + }; > > + > > + sai3: sai@30c30000 { > > + compatible = "fsl,imx8mp- > sai", "fsl,imx8mq-sai"; > > + reg = <0x30c30000 0x10000>; > > + interrupts = <GIC_SPI 50 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, > > + <&clk > IMX8MP_CLK_DUMMY>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>; > > + clock-names = "bus", > "mclk0", "mclk1", "mclk2", "mclk3"; > > + dmas = <&sdma2 4 2 0>, > <&sdma2 5 2 0>; > > + dma-names = "rx", "tx"; > > + status = "disabled"; > > + }; > > + > > + sai5: sai@30c50000 { > > + compatible = "fsl,imx8mp- > sai", "fsl,imx8mq-sai"; > > + reg = <0x30c50000 0x10000>; > > + interrupts = <GIC_SPI 90 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI5_IPG>, > > + <&clk > IMX8MP_CLK_DUMMY>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>; > > + clock-names = "bus", > "mclk0", "mclk1", "mclk2", "mclk3"; > > + dmas = <&sdma2 8 2 0>, > <&sdma2 9 2 0>; > > + dma-names = "rx", "tx"; > > + status = "disabled"; > > + }; > > + > > + sai6: sai@30c60000 { > > + compatible = "fsl,imx8mp- > sai", "fsl,imx8mq-sai"; > > + reg = <0x30c60000 0x10000>; > > + interrupts = <GIC_SPI 90 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI6_IPG>, > > + <&clk > IMX8MP_CLK_DUMMY>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>; > > + clock-names = "bus", > "mclk0", "mclk1", "mclk2", "mclk3"; > > + dmas = <&sdma2 10 2 0>, > <&sdma2 11 2 0>; > > + dma-names = "rx", "tx"; > > + status = "disabled"; > > + }; > > + > > + sai7: sai@30c80000 { > > + compatible = "fsl,imx8mp- > sai", "fsl,imx8mq-sai"; > > + reg = <0x30c80000 0x10000>; > > + interrupts = <GIC_SPI 111 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI7_IPG>, > > + <&clk > IMX8MP_CLK_DUMMY>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>, > > + <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>; > > + clock-names = "bus", > "mclk0", "mclk1", "mclk2", "mclk3"; > > + dmas = <&sdma2 12 2 0>, > <&sdma2 13 2 0>; > > + dma-names = "rx", "tx"; > > + status = "disabled"; > > + }; > > + }; > > + > > + sdma3: dma-controller@30e00000 { > > + compatible = "fsl,imx8mp-sdma", > "fsl,imx8mq-sdma"; > > + reg = <0x30e00000 0x10000>; > > + interrupts = <GIC_SPI 34 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, > > + <&clk > IMX8MP_CLK_AUDIO_ROOT>; > > + clock-names = "ipg", "ahb"; > > + #dma-cells = <3>; > > + fsl,sdma-ram-script-name = "imx/sdma/ > sdma-imx7d.bin"; > > + }; > > + > > + sdma2: dma-controller@30e10000 { > > + compatible = "fsl,imx8mp-sdma", > "fsl,imx8mq-sdma"; > > + reg = <0x30e10000 0x10000>; > > + interrupts = <GIC_SPI 103 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, > > + <&clk > IMX8MP_CLK_AUDIO_ROOT>; > > + clock-names = "ipg", "ahb"; > > + #dma-cells = <3>; > > + fsl,sdma-ram-script-name = "imx/sdma/ > sdma-imx7d.bin"; > > + }; > > + > > + audio_blk_ctrl: blk-ctrl@30e20000 { > > Shouldn't the node name be 'clock-controller@30e20000' as mentioned in the > bindings? > But for the whole series: > Testes-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > Best regards, > Alexander > > > + #clock-cells = <1>; > > + compatible = "fsl,imx8mp-audio-blk- > ctrl"; > > + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, > > + <&clk IMX8MP_CLK_SAI1>, > > + <&clk IMX8MP_CLK_SAI2>, > > + <&clk IMX8MP_CLK_SAI3>, > > + <&clk IMX8MP_CLK_SAI5>, > > + <&clk IMX8MP_CLK_SAI6>, > > + <&clk IMX8MP_CLK_SAI7>; > > + clock-names = "ahb", > > + "sai1", "sai2", > "sai3", > > + "sai5", "sai6", > "sai7"; > > + power-domains = <&pgc_audio>; > > + power-domain-names = "audio"; > > + reg = <0x30e20000 0x10000>; > > + }; > > + }; > > + > > aips4: bus@32c00000 { > > compatible = "fsl,aips-bus", "simple-bus"; > > reg = <0x32c00000 0x400000>; > > > -- > TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany > Amtsgericht München, HRB 105018 > Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider > http://www.tq-group.com/ > >
Am Montag, 27. Februar 2023, 12:38:10 CET schrieb Adam Ford: > On Mon, Feb 27, 2023 at 3:46 AM Alexander Stein > > <alexander.stein@ew.tq-group.com> wrote: > > Hi Marek, > > > > thanks for respinning this series. > > > > Am Donnerstag, 23. Februar 2023, 18:11:13 CET schrieb Marek Vasut: > > > Add all SAI nodes, SDMA2 and SDMA3 nodes, and AudioMIX node. This is > > > needed to get audio operational on i.MX8MP . > > > > > > Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > > Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > > Signed-off-by: Marek Vasut <marex@denx.de> > > > --- > > > Cc: Abel Vesa <abelvesa@kernel.org> > > > Cc: Fabio Estevam <festevam@gmail.com> > > > Cc: Jacky Bai <ping.bai@nxp.com> > > > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > Cc: Lucas Stach <l.stach@pengutronix.de> > > > Cc: Marco Felsch <m.felsch@pengutronix.de> > > > Cc: Michael Turquette <mturquette@baylibre.com> > > > Cc: NXP Linux Team <linux-imx@nxp.com> > > > Cc: Peng Fan <peng.fan@nxp.com> > > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > > > Cc: Richard Cochran <richardcochran@gmail.com> > > > Cc: Rob Herring <robh+dt@kernel.org> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > > Cc: Shawn Guo <shawnguo@kernel.org> > > > Cc: Stephen Boyd <sboyd@kernel.org> > > > Cc: devicetree@vger.kernel.org > > > Cc: linux-arm-kernel@lists.infradead.org > > > Cc: linux-clk@vger.kernel.org > > > --- > > > V2: - Add AUDIO_AXI clock to audio gpc > > > > > > - Use IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT for SDMA2 IPG clock > > > > > > V3: Rename audio_ahb to plain ahb > > > V4: - Add RB/TB from Luca > > > > > > - Rebase on next 20230223 > > > > > > --- > > > > > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 153 ++++++++++++++++++++++ > > > 1 file changed, 153 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index > > > ca8093ee4d0e4..56d2a6377a5a6 100644 > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > @@ -571,6 +571,13 @@ pgc_usb2_phy: power-domain@3 { > > > > > > reg = > > > > <IMX8MP_POWER_DOMAIN_USB2_PHY>; > > > > > }; > > > > > > + pgc_audio: power-domain@5 { > > > + #power-domain- > > > > cells = <0>; > > > > > + reg = > > > > <IMX8MP_POWER_DOMAIN_AUDIOMIX>; > > > > > + clocks = <&clk > > > > IMX8MP_CLK_AUDIO_ROOT>, > > > > > + <&clk > > > > IMX8MP_CLK_AUDIO_AXI>; > > > > > + }; > > > + > > > > > > pgc_gpu2d: power-domain@6 { > > > > > > #power-domain- > > > > cells = <0>; > > > > > reg = > > > > <IMX8MP_POWER_DOMAIN_GPU2D>; > > > > > @@ -1119,6 +1126,152 @@ opp-1000000000 { > > > > > > }; > > > > > > }; > > > > > > + aips5: bus@30c00000 { > > > + compatible = "fsl,aips-bus", "simple-bus"; > > > + reg = <0x30c00000 0x400000>; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + ranges; > > > + > > > + spba-bus@30c00000 { > > > + compatible = "fsl,spba-bus", "simple- > > > > bus"; > > > > > + reg = <0x30c00000 0x100000>; > > > > Is there an SPBA bus for every AIPS? I'm wondering why some aips do have > > an > > spba below and some do not. > > The SPBA buses are listed in the TRM, and they appear to be mostly > covering serial devices (UART, SPI, SAI, etc), but some are excluded. > As to why it is this way is more of a question for NXP. Check out > chapter 2 of the TRM for the AIPS memory maps. Thanks, I did find those AIPS parts. But the issue regarding SPBA is not so clear. Apparently the spba compatible is checked by the SDMA driver. Best regards, Alexander > adam > > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + ranges; > > > + > > > + sai1: sai@30c10000 { > > > + compatible = "fsl,imx8mp- > > > > sai", "fsl,imx8mq-sai"; > > > > > + reg = <0x30c10000 0x10000>; > > > + interrupts = <GIC_SPI 95 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI1_IPG>, > > > > > + <&clk > > > > IMX8MP_CLK_DUMMY>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>; > > > > > + clock-names = "bus", > > > > "mclk0", "mclk1", "mclk2", "mclk3"; > > > > > + dmas = <&sdma2 0 2 0>, > > > > <&sdma2 1 2 0>; > > > > Looking at Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml should > > the 2nd cell value be 24? This would be true for all other sai nodes. > > > > > + dma-names = "rx", "tx"; > > > + status = "disabled"; > > > + }; > > > + > > > + sai2: sai@30c20000 { > > > + compatible = "fsl,imx8mp- > > > > sai", "fsl,imx8mq-sai"; > > > > > + reg = <0x30c20000 0x10000>; > > > + interrupts = <GIC_SPI 96 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, > > > > > + <&clk > > > > IMX8MP_CLK_DUMMY>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>; > > > > > + clock-names = "bus", > > > > "mclk0", "mclk1", "mclk2", "mclk3"; > > > > > + dmas = <&sdma2 2 2 0>, > > > > <&sdma2 3 2 0>; > > > > > + dma-names = "rx", "tx"; > > > + status = "disabled"; > > > + }; > > > + > > > + sai3: sai@30c30000 { > > > + compatible = "fsl,imx8mp- > > > > sai", "fsl,imx8mq-sai"; > > > > > + reg = <0x30c30000 0x10000>; > > > + interrupts = <GIC_SPI 50 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, > > > > > + <&clk > > > > IMX8MP_CLK_DUMMY>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>; > > > > > + clock-names = "bus", > > > > "mclk0", "mclk1", "mclk2", "mclk3"; > > > > > + dmas = <&sdma2 4 2 0>, > > > > <&sdma2 5 2 0>; > > > > > + dma-names = "rx", "tx"; > > > + status = "disabled"; > > > + }; > > > + > > > + sai5: sai@30c50000 { > > > + compatible = "fsl,imx8mp- > > > > sai", "fsl,imx8mq-sai"; > > > > > + reg = <0x30c50000 0x10000>; > > > + interrupts = <GIC_SPI 90 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI5_IPG>, > > > > > + <&clk > > > > IMX8MP_CLK_DUMMY>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>; > > > > > + clock-names = "bus", > > > > "mclk0", "mclk1", "mclk2", "mclk3"; > > > > > + dmas = <&sdma2 8 2 0>, > > > > <&sdma2 9 2 0>; > > > > > + dma-names = "rx", "tx"; > > > + status = "disabled"; > > > + }; > > > + > > > + sai6: sai@30c60000 { > > > + compatible = "fsl,imx8mp- > > > > sai", "fsl,imx8mq-sai"; > > > > > + reg = <0x30c60000 0x10000>; > > > + interrupts = <GIC_SPI 90 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI6_IPG>, > > > > > + <&clk > > > > IMX8MP_CLK_DUMMY>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>; > > > > > + clock-names = "bus", > > > > "mclk0", "mclk1", "mclk2", "mclk3"; > > > > > + dmas = <&sdma2 10 2 0>, > > > > <&sdma2 11 2 0>; > > > > > + dma-names = "rx", "tx"; > > > + status = "disabled"; > > > + }; > > > + > > > + sai7: sai@30c80000 { > > > + compatible = "fsl,imx8mp- > > > > sai", "fsl,imx8mq-sai"; > > > > > + reg = <0x30c80000 0x10000>; > > > + interrupts = <GIC_SPI 111 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI7_IPG>, > > > > > + <&clk > > > > IMX8MP_CLK_DUMMY>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>, > > > > > + <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>; > > > > > + clock-names = "bus", > > > > "mclk0", "mclk1", "mclk2", "mclk3"; > > > > > + dmas = <&sdma2 12 2 0>, > > > > <&sdma2 13 2 0>; > > > > > + dma-names = "rx", "tx"; > > > + status = "disabled"; > > > + }; > > > + }; > > > + > > > + sdma3: dma-controller@30e00000 { > > > + compatible = "fsl,imx8mp-sdma", > > > > "fsl,imx8mq-sdma"; > > > > > + reg = <0x30e00000 0x10000>; > > > + interrupts = <GIC_SPI 34 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, > > > > > + <&clk > > > > IMX8MP_CLK_AUDIO_ROOT>; > > > > > + clock-names = "ipg", "ahb"; > > > + #dma-cells = <3>; > > > + fsl,sdma-ram-script-name = "imx/sdma/ > > > > sdma-imx7d.bin"; > > > > > + }; > > > + > > > + sdma2: dma-controller@30e10000 { > > > + compatible = "fsl,imx8mp-sdma", > > > > "fsl,imx8mq-sdma"; > > > > > + reg = <0x30e10000 0x10000>; > > > + interrupts = <GIC_SPI 103 > > > > IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&audio_blk_ctrl > > > > IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, > > > > > + <&clk > > > > IMX8MP_CLK_AUDIO_ROOT>; > > > > > + clock-names = "ipg", "ahb"; > > > + #dma-cells = <3>; > > > + fsl,sdma-ram-script-name = "imx/sdma/ > > > > sdma-imx7d.bin"; > > > > > + }; > > > + > > > + audio_blk_ctrl: blk-ctrl@30e20000 { > > > > Shouldn't the node name be 'clock-controller@30e20000' as mentioned in the > > bindings? > > But for the whole series: > > Testes-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > > > Best regards, > > Alexander > > > > > + #clock-cells = <1>; > > > + compatible = "fsl,imx8mp-audio-blk- > > > > ctrl"; > > > > > + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, > > > + <&clk IMX8MP_CLK_SAI1>, > > > + <&clk IMX8MP_CLK_SAI2>, > > > + <&clk IMX8MP_CLK_SAI3>, > > > + <&clk IMX8MP_CLK_SAI5>, > > > + <&clk IMX8MP_CLK_SAI6>, > > > + <&clk IMX8MP_CLK_SAI7>; > > > + clock-names = "ahb", > > > + "sai1", "sai2", > > > > "sai3", > > > > > + "sai5", "sai6", > > > > "sai7"; > > > > > + power-domains = <&pgc_audio>; > > > + power-domain-names = "audio"; > > > + reg = <0x30e20000 0x10000>; > > > + }; > > > + }; > > > + > > > > > > aips4: bus@32c00000 { > > > > > > compatible = "fsl,aips-bus", "simple-bus"; > > > reg = <0x32c00000 0x400000>; > > > > -- > > TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany > > Amtsgericht München, HRB 105018 > > Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider > > http://www.tq-group.com/
On 2/27/23 10:08, Alexander Stein wrote: [...] >> + sdma2: dma-controller@30e10000 { >> + compatible = "fsl,imx8mp-sdma", > "fsl,imx8mq-sdma"; >> + reg = <0x30e10000 0x10000>; >> + interrupts = <GIC_SPI 103 > IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&audio_blk_ctrl > IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, >> + <&clk > IMX8MP_CLK_AUDIO_ROOT>; >> + clock-names = "ipg", "ahb"; >> + #dma-cells = <3>; >> + fsl,sdma-ram-script-name = "imx/sdma/ > sdma-imx7d.bin"; >> + }; >> + >> + audio_blk_ctrl: blk-ctrl@30e20000 { > > Shouldn't the node name be 'clock-controller@30e20000' as mentioned in the > bindings? > But for the whole series: > Testes-by: Alexander Stein <alexander.stein@ew.tq-group.com> It should be clock-controller indeed, fixed in V5, thanks.
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index ca8093ee4d0e4..56d2a6377a5a6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -571,6 +571,13 @@ pgc_usb2_phy: power-domain@3 { reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>; }; + pgc_audio: power-domain@5 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>; + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, + <&clk IMX8MP_CLK_AUDIO_AXI>; + }; + pgc_gpu2d: power-domain@6 { #power-domain-cells = <0>; reg = <IMX8MP_POWER_DOMAIN_GPU2D>; @@ -1119,6 +1126,152 @@ opp-1000000000 { }; }; + aips5: bus@30c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + spba-bus@30c00000 { + compatible = "fsl,spba-bus", "simple-bus"; + reg = <0x30c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sai1: sai@30c10000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c10000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@30c20000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c20000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30c30000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c30000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30c50000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c50000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30c60000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c60000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai7: sai@30c80000 { + compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; + reg = <0x30c80000 0x10000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + sdma3: dma-controller@30e00000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e00000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma2: dma-controller@30e10000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e10000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + audio_blk_ctrl: blk-ctrl@30e20000 { + #clock-cells = <1>; + compatible = "fsl,imx8mp-audio-blk-ctrl"; + clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, + <&clk IMX8MP_CLK_SAI1>, + <&clk IMX8MP_CLK_SAI2>, + <&clk IMX8MP_CLK_SAI3>, + <&clk IMX8MP_CLK_SAI5>, + <&clk IMX8MP_CLK_SAI6>, + <&clk IMX8MP_CLK_SAI7>; + clock-names = "ahb", + "sai1", "sai2", "sai3", + "sai5", "sai6", "sai7"; + power-domains = <&pgc_audio>; + power-domain-names = "audio"; + reg = <0x30e20000 0x10000>; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>;