diff mbox series

[v6,5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

Message ID 20230228215739.171071-5-marex@denx.de (mailing list archive)
State New, archived
Headers show
Series [v6,1/5] clk: Introduce devm_clk_hw_register_gate_parent_data() | expand

Commit Message

Marek Vasut Feb. 28, 2023, 9:57 p.m. UTC 
Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
This is all that is needed to get analog audio output operational
on i.MX8MP EVK.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
---
V2: No change
V3: No change
V4: - Update codec node name and phandle label
    - Use just sound for the sound node name
    - Rebase on next 20230223
V5: - Drop regulator-always-on from codec regulator
    - Add RB from Fabio
    - TB by Alexander added and removed again, since the patch was reworked
    - Switch to simple-audio-card
    - Add sound-dai-cells to codec node
V6: - Split off separate pinctrl for regulator
    - Drop unused SAI3_RXFS pinmux
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 80 ++++++++++++++++++++
 1 file changed, 80 insertions(+)

Comments

Peng Fan (OSS) March 1, 2023, 2:36 a.m. UTC | #1 
On 3/1/2023 5:57 AM, Marek Vasut wrote:
> Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
> This is all that is needed to get analog audio output operational
> on i.MX8MP EVK.
> 
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>

Acked-by: Peng Fan <peng.fan@nxp.com>

> ---
> Cc: Abel Vesa <abelvesa@kernel.org>
> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Jacky Bai <ping.bai@nxp.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Marco Felsch <m.felsch@pengutronix.de>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Richard Cochran <richardcochran@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-clk@vger.kernel.org
> ---
> V2: No change
> V3: No change
> V4: - Update codec node name and phandle label
>      - Use just sound for the sound node name
>      - Rebase on next 20230223
> V5: - Drop regulator-always-on from codec regulator
>      - Add RB from Fabio
>      - TB by Alexander added and removed again, since the patch was reworked
>      - Switch to simple-audio-card
>      - Add sound-dai-cells to codec node
> V6: - Split off separate pinctrl for regulator
>      - Drop unused SAI3_RXFS pinmux
> ---
>   arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 80 ++++++++++++++++++++
>   1 file changed, 80 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 7816853162b3f..fa37ce89f8d3d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -40,6 +40,17 @@ pcie0_refclk: pcie0-refclk {
>   		clock-frequency = <100000000>;
>   	};
>   
> +	reg_audio_pwr: regulator-audio-pwr {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_audio_pwr_reg>;
> +		regulator-name = "audio-pwr";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>   	reg_can1_stby: regulator-can1-stby {
>   		compatible = "regulator-fixed";
>   		regulator-name = "can1-stby";
> @@ -83,6 +94,37 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
>   		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
>   		enable-active-high;
>   	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "wm8960-audio";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,frame-master = <&cpudai>;
> +		simple-audio-card,bitclock-master = <&cpudai>;
> +		simple-audio-card,widgets =
> +			"Headphone", "Headphone Jack",
> +			"Speaker", "External Speaker",
> +			"Microphone", "Mic Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "HP_L",
> +			"Headphone Jack", "HP_R",
> +			"External Speaker", "SPK_LP",
> +			"External Speaker", "SPK_LN",
> +			"External Speaker", "SPK_RP",
> +			"External Speaker", "SPK_RN",
> +			"LINPUT1", "Mic Jack",
> +			"LINPUT3", "Mic Jack",
> +			"Mic Jack", "MICB";
> +
> +		cpudai: simple-audio-card,cpu {
> +			sound-dai = <&sai3>;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&wm8960>;
> +		};
> +
> +	};
>   };
>   
>   &flexspi {
> @@ -344,6 +386,18 @@ &i2c3 {
>   	pinctrl-0 = <&pinctrl_i2c3>;
>   	status = "okay";
>   
> +	wm8960: codec@1a {
> +		compatible = "wlf,wm8960";
> +		reg = <0x1a>;
> +		#sound-dai-cells = <0>;
> +		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
> +		clock-names = "mclk";
> +		wlf,shared-lrclk;
> +		wlf,hp-cfg = <3 2 3>;
> +		wlf,gpio-cfg = <1 3>;
> +		SPKVDD1-supply = <&reg_audio_pwr>;
> +	};
> +
>   	pca6416: gpio@20 {
>   		compatible = "ti,tca6416";
>   		reg = <0x20>;
> @@ -422,6 +476,16 @@ &pwm4 {
>   	status = "okay";
>   };
>   
> +&sai3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai3>;
> +	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
> +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <12288000>;
> +	fsl,sai-mclk-direction-output;
> +	status = "okay";
> +};
> +
>   &snvs_pwrkey {
>   	status = "okay";
>   };
> @@ -499,6 +563,12 @@ &wdog1 {
>   };
>   
>   &iomuxc {
> +	pinctrl_audio_pwr_reg: audiopwrreggrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
> +		>;
> +	};
> +
>   	pinctrl_eqos: eqosgrp {
>   		fsl,pins = <
>   			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
> @@ -668,6 +738,16 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
>   		>;
>   	};
>   
> +	pinctrl_sai3: sai3grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
> +			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
> +			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
> +			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
> +			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
> +		>;
> +	};
> +
>   	pinctrl_uart2: uart2grp {
>   		fsl,pins = <
>   			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
Marco Felsch March 1, 2023, 9:42 a.m. UTC | #2 
On 23-02-28, Marek Vasut wrote:
> Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
> This is all that is needed to get analog audio output operational
> on i.MX8MP EVK.
> 
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>

Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7816853162b3f..fa37ce89f8d3d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -40,6 +40,17 @@  pcie0_refclk: pcie0-refclk {
 		clock-frequency = <100000000>;
 	};
 
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audio_pwr_reg>;
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		regulator-name = "can1-stby";
@@ -83,6 +94,37 @@  reg_usdhc2_vmmc: regulator-usdhc2 {
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8960-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"External Speaker", "SPK_LP",
+			"External Speaker", "SPK_LN",
+			"External Speaker", "SPK_RP",
+			"External Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"Mic Jack", "MICB";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8960>;
+		};
+
+	};
 };
 
 &flexspi {
@@ -344,6 +386,18 @@  &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <3 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+	};
+
 	pca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
@@ -422,6 +476,16 @@  &pwm4 {
 	status = "okay";
 };
 
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -499,6 +563,12 @@  &wdog1 {
 };
 
 &iomuxc {
+	pinctrl_audio_pwr_reg: audiopwrreggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
+		>;
+	};
+
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
@@ -668,6 +738,16 @@  MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
 		>;
 	};
 
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140