diff mbox series

[v2,1/3] phy: ti: gmii-sel: Add support for SGMII mode

Message ID 20230309063514.398705-2-s-vadapalli@ti.com (mailing list archive)
State New, archived
Headers show
Series PHY-GMII-SEL: Add support for SGMII mode | expand

Commit Message

Siddharth Vadapalli March 9, 2023, 6:35 a.m. UTC 
Add support to configure the CPSW MAC's PHY in SGMII mode if the SoC
supports it. The extra_modes member of the phy_gmii_sel_soc_data struct
corresponding to the SoC is used to determine whether or not the SoC
supports SGMII mode.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 drivers/phy/ti/phy-gmii-sel.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 8c667819c39a..5e16d8dd5bee 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -23,6 +23,7 @@ 
 #define AM33XX_GMII_SEL_MODE_RGMII	2
 
 /* J72xx SoC specific definitions for the CONTROL port */
+#define J72XX_GMII_SEL_MODE_SGMII	3
 #define J72XX_GMII_SEL_MODE_QSGMII	4
 #define J72XX_GMII_SEL_MODE_QSGMII_SUB	6
 
@@ -106,6 +107,13 @@  static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
 			gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII_SUB;
 		break;
 
+	case PHY_INTERFACE_MODE_SGMII:
+		if (!(soc_data->extra_modes & BIT(PHY_INTERFACE_MODE_SGMII)))
+			goto unsupported;
+		else
+			gmii_sel_mode = J72XX_GMII_SEL_MODE_SGMII;
+		break;
+
 	default:
 		goto unsupported;
 	}