diff mbox series

[2/2] dt-bindings: pinctrl: Move k3.h to arch

Message ID 20230311131325.9750-3-nm@ti.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: pinctrl: ti-k3: Move k3.h to arch specific | expand

Commit Message

Nishanth Menon March 11, 2023, 1:13 p.m. UTC
Move the k3 pinctrl definition to arch dts folder.

While at this, fixup MAINTAINERS and header guard macro to better
reflect the changes.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/c4d53e9c-dac0-8ccc-dc86-faada324beba@linaro.org/
Signed-off-by: Nishanth Menon <nm@ti.com>
---

There is no specific case I can think of at the moment to create a
pinctrl.dtsi for the SoCs.. So, unlike other SoCs, I had not done that
in the series, if folks have a better opinion about this, please let us
discuss.

 MAINTAINERS                                                 | 1 -
 arch/arm64/boot/dts/ti/k3-am62.dtsi                         | 3 ++-
 arch/arm64/boot/dts/ti/k3-am62a.dtsi                        | 3 ++-
 arch/arm64/boot/dts/ti/k3-am64.dtsi                         | 3 ++-
 arch/arm64/boot/dts/ti/k3-am65.dtsi                         | 3 ++-
 arch/arm64/boot/dts/ti/k3-j7200.dtsi                        | 3 ++-
 arch/arm64/boot/dts/ti/k3-j721e.dtsi                        | 3 ++-
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi                       | 3 ++-
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi                       | 3 ++-
 .../pinctrl/k3.h => arch/arm64/boot/dts/ti/k3-pinctrl.h     | 6 +++---
 10 files changed, 19 insertions(+), 12 deletions(-)
 rename include/dt-bindings/pinctrl/k3.h => arch/arm64/boot/dts/ti/k3-pinctrl.h (94%)

Comments

Krzysztof Kozlowski March 11, 2023, 3:46 p.m. UTC | #1
On 11/03/2023 14:13, Nishanth Menon wrote:
> Move the k3 pinctrl definition to arch dts folder.
> 
> While at this, fixup MAINTAINERS and header guard macro to better
> reflect the changes.
> 
> Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Suggested-by: Linus Walleij <linus.walleij@linaro.org>
> Link: https://lore.kernel.org/all/c4d53e9c-dac0-8ccc-dc86-faada324beba@linaro.org/
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> 
> There is no specific case I can think of at the moment to create a
> pinctrl.dtsi for the SoCs.. So, unlike other SoCs, I had not done that
> in the series, if folks have a better opinion about this, please let us
> discuss.
> 
>  MAINTAINERS                                                 | 1 -
>  arch/arm64/boot/dts/ti/k3-am62.dtsi                         | 3 ++-
>  arch/arm64/boot/dts/ti/k3-am62a.dtsi                        | 3 ++-
>  arch/arm64/boot/dts/ti/k3-am64.dtsi                         | 3 ++-
>  arch/arm64/boot/dts/ti/k3-am65.dtsi                         | 3 ++-
>  arch/arm64/boot/dts/ti/k3-j7200.dtsi                        | 3 ++-
>  arch/arm64/boot/dts/ti/k3-j721e.dtsi                        | 3 ++-
>  arch/arm64/boot/dts/ti/k3-j721s2.dtsi                       | 3 ++-
>  arch/arm64/boot/dts/ti/k3-j784s4.dtsi                       | 3 ++-
>  .../pinctrl/k3.h => arch/arm64/boot/dts/ti/k3-pinctrl.h     | 6 +++---

Bindings are separate from other changes (also DTS). Split the patches.

(...)

>  / {
>  	model = "Texas Instruments K3 J784S4 SoC";
>  	compatible = "ti,j784s4";
> diff --git a/include/dt-bindings/pinctrl/k3.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> similarity index 94%
> rename from include/dt-bindings/pinctrl/k3.h
> rename to arch/arm64/boot/dts/ti/k3-pinctrl.h
> index 469bd29651db..6004e0967ec5 100644
> --- a/include/dt-bindings/pinctrl/k3.h
> +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h

Dropping this file is going to break existing code and I would say is
also a break of the ABI. You need to keep the header for at least one
cycle, you can add there a warning for coming deprecation.

See for example:
https://lore.kernel.org/all/20220605160508.134075-5-krzysztof.kozlowski@linaro.org/

Best regards,
Krzysztof
Nishanth Menon March 13, 2023, 4 p.m. UTC | #2
On 16:46-20230311, Krzysztof Kozlowski wrote:
> On 11/03/2023 14:13, Nishanth Menon wrote:
> > Move the k3 pinctrl definition to arch dts folder.
> > 
> > While at this, fixup MAINTAINERS and header guard macro to better
> > reflect the changes.
> > 
> > Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Suggested-by: Linus Walleij <linus.walleij@linaro.org>
> > Link: https://lore.kernel.org/all/c4d53e9c-dac0-8ccc-dc86-faada324beba@linaro.org/
> > Signed-off-by: Nishanth Menon <nm@ti.com>
> > ---
> > 
> > There is no specific case I can think of at the moment to create a
> > pinctrl.dtsi for the SoCs.. So, unlike other SoCs, I had not done that
> > in the series, if folks have a better opinion about this, please let us
> > discuss.
> > 
> >  MAINTAINERS                                                 | 1 -
> >  arch/arm64/boot/dts/ti/k3-am62.dtsi                         | 3 ++-
> >  arch/arm64/boot/dts/ti/k3-am62a.dtsi                        | 3 ++-
> >  arch/arm64/boot/dts/ti/k3-am64.dtsi                         | 3 ++-
> >  arch/arm64/boot/dts/ti/k3-am65.dtsi                         | 3 ++-
> >  arch/arm64/boot/dts/ti/k3-j7200.dtsi                        | 3 ++-
> >  arch/arm64/boot/dts/ti/k3-j721e.dtsi                        | 3 ++-
> >  arch/arm64/boot/dts/ti/k3-j721s2.dtsi                       | 3 ++-
> >  arch/arm64/boot/dts/ti/k3-j784s4.dtsi                       | 3 ++-
> >  .../pinctrl/k3.h => arch/arm64/boot/dts/ti/k3-pinctrl.h     | 6 +++---
> 
> Bindings are separate from other changes (also DTS). Split the patches.
> 
> (...)
> 
> >  / {
> >  	model = "Texas Instruments K3 J784S4 SoC";
> >  	compatible = "ti,j784s4";
> > diff --git a/include/dt-bindings/pinctrl/k3.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> > similarity index 94%
> > rename from include/dt-bindings/pinctrl/k3.h
> > rename to arch/arm64/boot/dts/ti/k3-pinctrl.h
> > index 469bd29651db..6004e0967ec5 100644
> > --- a/include/dt-bindings/pinctrl/k3.h
> > +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> 
> Dropping this file is going to break existing code and I would say is
> also a break of the ABI. You need to keep the header for at least one
> cycle, you can add there a warning for coming deprecation.
> 
> See for example:
> https://lore.kernel.org/all/20220605160508.134075-5-krzysztof.kozlowski@linaro.org/


Makes complete sense. Thanks. will follow the lead and redo the series.
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 2892858cb040..442ac29e1fce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2933,7 +2933,6 @@  F:	Documentation/devicetree/bindings/arm/ti/k3.yaml
 F:	Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
 F:	arch/arm64/boot/dts/ti/Makefile
 F:	arch/arm64/boot/dts/ti/k3-*
-F:	include/dt-bindings/pinctrl/k3.h
 
 ARM/TOSHIBA VISCONTI ARCHITECTURE
 M:	Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index 37fcbe7a3c33..a401f5225243 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -8,9 +8,10 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM625 SoC";
 	compatible = "ti,am625";
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 6eb87c3f9f3c..fe60c9ce21e3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -8,9 +8,10 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM62A SoC";
 	compatible = "ti,am62a7";
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
index c858725133af..60fe95b48312 100644
--- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -8,9 +8,10 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM642 SoC";
 	compatible = "ti,am642";
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index c538a0bf3cdd..3093ef6b9b23 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -8,9 +8,10 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM654 SoC";
 	compatible = "ti,am654";
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index d74f86b0f622..bbe380c72a7e 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -7,9 +7,10 @@ 
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J7200 SoC";
 	compatible = "ti,j7200";
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 6975cae644d9..4c7d5f9d61a8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -7,9 +7,10 @@ 
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J721E SoC";
 	compatible = "ti,j721e";
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 78295ee0fee5..376924726f1f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -10,9 +10,10 @@ 
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 
 	model = "Texas Instruments K3 J721S2 SoC";
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
index 3eb0d0568959..2e03d84da7d2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -10,9 +10,10 @@ 
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J784S4 SoC";
 	compatible = "ti,j784s4";
diff --git a/include/dt-bindings/pinctrl/k3.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
similarity index 94%
rename from include/dt-bindings/pinctrl/k3.h
rename to arch/arm64/boot/dts/ti/k3-pinctrl.h
index 469bd29651db..6004e0967ec5 100644
--- a/include/dt-bindings/pinctrl/k3.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -3,10 +3,10 @@ 
  * This header provides constants for pinctrl bindings for TI's K3 SoC
  * family.
  *
- * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
  */
-#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
-#define _DT_BINDINGS_PINCTRL_TI_K3_H
+#ifndef DTS_ARM64_TI_K3_PINCTRL_H
+#define DTS_ARM64_TI_K3_PINCTRL_H
 
 #define PULLUDEN_SHIFT		(16)
 #define PULLTYPESEL_SHIFT	(17)